• Composites Research
• /
• v.17 no.5
• /
• pp.47-53
• /
• 2004

In this work, two thermal latent catalysts, i.e., N-benzylpyrazinium hexafluoroantimonate (BPH) and benzyl-2,5-dimethylpyrazinium hexafluoroantimonate (BDPH), were synthesized. The cure behaviors and thermal stabilities of diglycidylether of bisphenol A (DCEBA) epoxy resins initiated by 1 wt.% of the catalysts were investigated by DSC, NIR, TCA, and DMA Latent properties of the catalysts were examined by conversion of epoxy resins using NIR from $100^{\circ}C$ to $180^{\circ}C$ From the resultes of near-IR, DGEBA/BPH system showed higher conversion than that of DGEBA/BDPH system. The thermal stabilities of DGEBA/BDPH system based on the initial decomposition temperature (IDT) and integral procedural decomposition (IPDT) were relatively lower than those of DCEBA/BPH system. These could be attributed to the hindered structure of BDPH, resulting in decreasing the thermal stability in the DGEBA/BDPH system.

• Journal of Aerospace System Engineering
• /
• v.11 no.1
• /
• pp.14-21
• /
• 2017

A Linear parameterized Sigma-Pi neural network (SPNN) is applied to a tilt-duct unmanned aerial vehicle (UAV) which has a very large longitudinal stability ($C_{L{\alpha}}$). It is uncontrollable by a proportional, integral, derivative (PID) controller due to heavy stability. It is shown that the combined inner loop and outer loop of SPNN controllers could overcome the sluggish longitudinal dynamics using a method of dynamic inversion and pseudo-control to compensate for reference model error. The simulation results of the way point guidance are presented to evaluate the performance of SPNN in comparison to a PID controller.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.3
• /
• pp.384-388
• /
• 1995

High content of polyunsaturated fatty acid in fish oil makes it very susceptible to oxidation, which prevent fish oil from successful application to food processing or functional foods. To resolve this problem, oxidation stability model of fish oil was developed using the following differential equation : $dp/dt=k{\cdot}p(t){\cdot}[P_{max}\;-\;p(t)]$. This differential equation can be intergrated using analytical techniques to give : $p(t)=P_{max}/[1\;+\;[(P_{max}/P_{(0)})\;-\;-1]{\cdot}EXP(-K_p{\cdot}t)]$. At 50, 60, 70 and $80^{\circ}C,\;K_p$ were 0.00535, 0.01345, 0.02516 and 0.04675, respectively. The proposed model was well agreed with the measured data except for some minor deviations. In addition, $K_p$ was expressed as a function of temperature : $K_p=(1/P_{max})EXP\;[1\;-\;(8148/T)+20.1]$. Where T is absolute temperature($^{o}K$).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.2
• /
• pp.303-308
• /
• 2001

An objection of this study is to develop a high stable measuring circuits and a analytic system for radioactive pulses. The proposed system consists of a pulse detection units for neutrons and gamma-rays a programmable high voltage supply unit and a digital signal processor. The programmable high voltage supply unit designed can generate DC voltage up to 1,500 V at 5 V input and have a series voltage regulator to maintain the output voltage constantly, resulting in less than 1.63% of voltage regulation. The pulse detection parts consists of an active integrator, a pole-zero circuit, and a 3-stage amplifier of 60 dB, and its frequency bandwidth is from 37 Hz to 300 kHzAlso, pulse height distribution in accordance with pulse counts is important data in analyzing radioactive pulses. In this study, A/D convertor (12bit, 100ms) and DSP (TMS320C31-60) are used to analyze the pulse height, and the analytic system is designed to be operated in PC-base.

• Journal of Digital Contents Society
• /
• v.13 no.2
• /
• pp.169-176
• /
• 2012

This paper presents a parallel object-oriented programming (OOP) platform for efficient visualization of three-dimensional content in CUDA environments. For this purpose, this paper discusses the features and limitations in implementing C++ object-oriented codes using CUDA and proposes the solutions. Also, it presents how to implement a 3D parallel visualization platform based on the MVC (Model/View/Controller) design pattern. Also, it provides sample implementations for integral MLS (iMLS) and signed distance fields (SDFs) based on the Marching Cubes and Raytracing. The proposed approach enables GPU parallel processing only by implementing simple interfaces. Based on this, developers can expect general benefits that are common in general OOP techniques including abstractization and inheritance. Though I implemented only two specific samples in this paper, I expect my approach can be widely applied to general computer graphics problems.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.4
• /
• pp.297-303
• /
• 2014

Using the bond-based peridynamics and the parallel computation with binary decomposition, an adjoint shape design sensitivity analysis(DSA) method is developed for the dynamic crack propagation problems. The peridynamics includes the successive branching of cracks and employs the explicit scheme of time integration. The adjoint variable method is generally not suitable for path-dependent problems but employed since the path of response analysis is readily available. The accuracy of analytical design sensitivity is verified by comparing it with the finite difference one. The finite difference method is susceptible to the amount of design perturbations and could result in inaccurate design sensitivity for highly nonlinear peridynamics problems with respect to the design. It turns out that $C^1$-continuous volume fraction is necessary for the accurate evaluation of shape design sensitivity in peridynamic discretization.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.12
• /
• pp.1271-1280
• /
• 2012

In the recent parking assistant systems, finding out the distance to the object behind a car is often performed by the range sensors such as ultrasonic sensors, radars. However, the installation of additional sensors on the used vehicle could be difficult and require extra cost. On the other hand, the motion stereo technique that extracts distance information using only an image sensor was also proposed. However, In the stereo rectification step, the motion stereo requires good features and exacts matching result. In this paper, we propose a fast algorithm that extracts the accurate distance information for the parallel parking situation using the consecutive images that is acquired by a rear-view camera. The proposed algorithm uses the quadrangle transform of the image, the horizontal line integral projection, and the blocking-based correlation measurement. In the experiment with the magna parallel test sequence, the result shows that the line-accurate distance measurement with the image sequence from the rear-view camera is possible.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.3
• /
• pp.47-53
• /
• 2001

When a ship advancing in waves is subjected to impact forces or irregular forces, the motion analyses for ship are convenient for being calculated in the time domain. The added mass, wave damping coefficients, wave exciting forces and mean drift forces are calculated by 3-Dimensional panel method used the translating pulsating Green function in the frequency domain and the motion equations which are considered by the memory effect due to waves are numerically solved by using the Newmark-$\beta$ method in the time domain. The motion analyses are carried out for a Series 60($C_B=0.7$) moving in irregular waves. The items of calculation are 6-degree motions, accelerations at the fore and after position, numbers of deck wetness and numbers of exposure at ship-bottom, etc. Moreover, the thrust addition in waves is examined by considering the time mean drift forces in the motion equations of time domain.

• Investigative Magnetic Resonance Imaging
• /
• v.13 no.1
• /
• pp.15-21
• /
• 2009

Purpose : A method to estimate a real k-space trajectory based on a circuit model of the gradient system is proposed for spiral imaging. The estimated k-space trajectory instead of the ideal trajectory is used in the reconstruction to improve the image quality in the spiral imaging. Materials and Methods : Since the gradient system has self resistance, capacitance, and inductance, as well as the mutual inductance between the magnet and the gradient coils, the generated gradient fields have delays and transient responses compared to the input waveform to the gradient system. The real gradient fields and their trajectory in k-space play an important role in the reconstruction. In this paper, the gradient system is modeled with R-L-C circuits, and real gradient fields are estimated from the input to the model. An experimental method to determine the model parameters (R, L, C values) is also suggested from the quality of the reconstructed image. Results : The gradient fields are estimated from the circuit model of the gradient system at 1.5 Tesla MRI system. The spiral trajectory obtained by the integration of the estimated gradient fields is used for the reconstruction. From experiments, the reconstructed images using the estimated trajectory show improved uniformity, reduced overshoots near the edges, and enhanced resolutions compared to those using the ideal trajectory without model. Conclusion : The gradient system was successfully modeled by the R-L-C circuits. Much improved reconstruction was achieved in the spiral imaging using the trajectory estimated by the proposed model.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.4
• /
• pp.85-89
• /
• 2021

AlGaN-based UV-C light-emitting diodes (LEDs) were applied for p-type activation by electrochemical potentiostatic activation (EPA). The p-type activation efficiency was increased by removing hydrogen atoms through EPA treatment using a neutral Mg-H complex that causes high resistance and low conductivity. A neutral Mg-H complex is decomposed into Mg^- and H⁺ depending on the key parameters of solution, voltage, and time. The improved hole carrier concentration was confirmed by secondary ion mass spectroscopy (SIMS) analysis. This mechanism eventually improved the internal quantum efficiency (IQE), the light extraction efficiency, the leakage current value in the reverse current region, and junction temperature, resulting in better UV-C LED lifetime. For systematic analysis, SIMS, Etamax IQE system, integrating sphere, and current-voltage measurement system were used, and the results were compared with the existing N₂-annealing method.