• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.115-116
• /
• 2012

The demand for flexible electronic systems such as wearable computers, E-paper, and flexible displays has increased due to their advantages of excellent portability, conformal contact with curved surfaces, light weight, and human friendly interfaces over present rigid electronic systems. This seminar introduces three recent progresses that can extend the application of high performance flexible inorganic electronics. The first part of this seminar will introduce a RRAM with a one transistor-one memristor (1T-1M) arrays on flexible substrates. Flexible memory is an essential part of electronics for data processing, storage, and radio frequency (RF) communication and thus a key element to realize such flexible electronic systems. Although several emerging memory technologies, including resistive switching memory, have been proposed, the cell-to-cell interference issue has to be overcome for flexible and high performance nonvolatile memory applications. The cell-to-cell interference between neighbouring memory cells occurs due to leakage current paths through adjacent low resistance state cells and induces not only unnecessary power consumption but also a misreading problem, a fatal obstacle in memory operation. To fabricate a fully functional flexible memory and prevent these unwanted effects, we integrated high performance flexible single crystal silicon transistors with an amorphous titanium oxide (a-TiO2) based memristor to control the logic state of memory. The $8{\times}8$ NOR type 1T-1M RRAM demonstrated the first random access memory operation on flexible substrates by controlling each memory unit cell independently. The second part of the seminar will discuss the flexible GaN LED on LCP substrates for implantable biosensor. Inorganic III-V light emitting diodes (LEDs) have superior characteristics, such as long-term stability, high efficiency, and strong brightness compared to conventional incandescent lamps and OLED. However, due to the brittle property of bulk inorganic semiconductor materials, III-V LED limits its applications in the field of high performance flexible electronics. This seminar introduces the first flexible and implantable GaN LED on plastic substrates that is transferred from bulk GaN on Si substrates. The superb properties of the flexible GaN thin film in terms of its wide band gap and high efficiency enable the dramatic extension of not only consumer electronic applications but also the biosensing scale. The flexible white LEDs are demonstrated for the feasibility of using a white light source for future flexible BLU devices. Finally a water-resist and a biocompatible PTFE-coated flexible LED biosensor can detect PSA at a detection limit of 1 ng/mL. These results show that the nitride-based flexible LED can be used as the future flexible display technology and a type of implantable LED biosensor for a therapy tool. The final part of this seminar will introduce a highly efficient and printable BaTiO3 thin film nanogenerator on plastic substrates. Energy harvesting technologies converting external biomechanical energy sources (such as heart beat, blood flow, muscle stretching and animal movements) into electrical energy is recently a highly demanding issue in the materials science community. Herein, we describe procedure suitable for generating and printing a lead-free microstructured BaTiO3 thin film nanogenerator on plastic substrates to overcome limitations appeared in conventional flexible ferroelectric devices. Flexible BaTiO3 thin film nanogenerator was fabricated and the piezoelectric properties and mechanically stability of ferroelectric devices were characterized. From the results, we demonstrate the highly efficient and stable performance of BaTiO3 thin film nanogenerator.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.31-31
• /
• 2008

고주파 잡음 발생과 고집적화 문제 해결을 위해 고용량 디커플링 캐패시터를 기판에 내장하는 연구가 활발히 진행되고 있다. 본 연구에서는 초고주파 환경에서 고용량 기판 내장형 디커플링 캐패시터로의 응용을 위해 $BaTiO_3$박막을 에어로졸 데포지션 법을 이용하여 12~0.2 ${\mu}m$의 두께로 제조하였고 그 유전특성을 조사하였다. 그결과, 1 MHz에서 permittivity가 70, loss tangent은 3% 이하였으며, capacitance density는 $1{\mu}m$의 두께에서 59 nF/$cm^2$이었다. 하지만, 박막의 두께가 $1{\mu}m$ 이하에서는 XRD를 통해 결정성이 확인 되었음에도 큰 누설전류로 인해 유전특성을 확인할 수 없었다. 이 누설전류의 발생 원인을 조사하기 위해 $BaTiO_3$박막의 표면의 미세구조를 SEM으로 관찰한 결과 여러 결함들이 확인되었으며, 또한 전극 직경의 크기를 1.5 mm에서 0.33 mm로 작게 변화시킴으로서 그 유전특성을 조사하여 박막의 불균일성과 박막화의 가능성을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.377-380
• /
• 2001

The BST thin films to composite (Ba$\sub$x/Sr$\sub$l-x/)TiO$_3$ using sol-gel method were fabricated on Pt/Ti/SiO$_2$/Si substrate. The thin film capacitor to be ferroelectric materials was investigated by structural and electrical properties. BST solution was composited by moi ratio, and then spin-coated (from 3 times to 5 times coating on Pt/SiO$_2$/Si substrate. Thickness of BST ceramics thin films are about 2600∼2800[${\AA}$] in 3 times deposition. The property of leakage current was stable when the applied voltage was 3[V]. Leakage current of 3 times coated BST thin film was 10$\^$-9/∼10$\^$-11/[A] at 0∼3[V].

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1491-1493
• /
• 1997

In this study, Sol-Gel derived $Ba_{0.7}Sr_{0.3}TiO_3$ (BST(70/30)) thin films were investigated. The stock solution of BST were fabricated and spin-coated on the Pt/Ti/$SiO_2$/Si and ITO/glass substrates. The coated specimen were dried at $300^{\circ}C$ and finally annealed at $650{\sim}750^{\circ}C$. To analyse crystallization condition and microstructural morphology for different substrates, XRD, and SEM analysis were processed. In the BST(70/30) composition. dielectric constant and loss characteristics measured at 1kHz were 173, 0.01% for Pt/Ti/$SiO_2$/Si substrates and 181, 0.019% for ITO/glass substrates, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.263-266
• /
• 2001

In this paper, we investigated dielectric properies for BST thin films that was deposited on MgO/Si substrates using RF magnetron sputtering. In here, MgO film was used to perform that a diffusion b arrier between the BST film and Si substrate and a buffer layer to assist the BST film growth. A d eposition condition for MgO films was RF Power of 50W, substrate temperature of room temperature and the working gas ratio of Ar:O$_2$ were varied from 90:10 to 60:47. Finally we manufactured the cap acitor of Al/BST/MgO/Si/Al structure to know electrical properties of this capacitor through I-V, C-V measurement. In the results, C-V aha racteristic curves was shown a ferroelectric property so we measured P-E. A remanent poliazation and coerceive electric field was present 2$\mu$C/cm$^2$ and -27kV/cm respectively at Ar:O$_2$=90:10. And a va clue of dielectric constant was 86 at Ar:02=90:10.

• 한국전자파학회논문지
• /
• 제13권8호
• /
• pp.819-826
• /
• 2002

본 논문은 $Ba_{0.5}$Sr$_{0.5}$TiO$_3$(BST) 박막을 이용한 대역 통과 여파기를 설계, 제작한 것으로 마이크로스트립 과 코플래너 웨이브가이드(CPW), CBCPW 전송 선로 구조에서 각 구조의 여파기 특성을 비교하였다. 제작된 여파기는 전압 0V 인가시 각각 6.4 GHz, 6.14 GHz, 6.04 GHz의 중심 주파수와 6 dB, 4.41 dB, 5.41 dB의 삽입 손실이 측정되었으며, 40V 인가시 중심 주파수 6.61 GHz, 6.31 GHz, 6.21 GHz와 삽입 손실 7.33 dB, 5.83 dB, 6.83 dB로 나타났다. 본 논문에서 제작된 각각의 대역 통과 야파기는 가변 범위가 약 3 % - 8 %이며, 무선랜 대역에 응용할 수 있도록 설계 및 제작되었다.다.

• 공업화학
• /
• 제8권4호
• /
• pp.589-594
• /
• 1997

화학증착법을 통하여 $650^{\circ}C$의 증착온도와 0.0126Torr의 산소분압인 증착조건에서 원료물질로 $\beta$-diketonates 킬레이트 화합물을 사용하여 Si(111) 및 $SrTiO_3(100)$ 기판에 $YBa_2Cu_3O_y$ 고온 초전도 박막을 제조하였다. $SrTiO_3(100)$기판에서 제조된 박막의 $T_{c,onset}$과 $T_{c.0}$는 각각 91K와 87K로 나타났다. 또한, Si(111)기판에서 제조된 박막의 $T_{c,onset}$은 91K였지만 $T_{c.0}$는 액체질소 비등점(77.3K)에서는 보이지 않았다. $SrTiO_3(100)$에 증착된 초전도 박막은 치밀하고 2차원적으로 배열된 미세구조를 갖고 있는 반면, Si(111)에 증착된 초전도 박막은 상대적으로 기공이 많으며 무질서한 미세구조를 형성하였다.

• 한국세라믹학회지
• /
• 제35권9호
• /
• pp.895-898
• /
• 1998

• 한국세라믹학회지
• /
• 제43권11호
• /
• pp.715-723
• /
• 2006

Perovskite oxide materials are very important for the electronics industry, because they exhibit promising properties. With an interest in the obvious applications, significant effort has been invested in the growth of highly crystalline epitaxial perovskite oxide thin films in our laboratory. And the desired structure of films was formed to achieve excellent properties. $Y_1Ba_2Cu_3O_{7-x}$ (YBCO) superconducting thin films were simultaneously deposited on both sides of 3 inch wafer by inverted cylindrical sputtering. Values of microwave surface resistance R$_2$ (75 K, 145 GHz, 0 T) smaller than 100 m$\Omega$ were reached over the whole area of YBCO thin films by pre-seeded a self-template layer. For implementation of voltage tunable high-quality varactor, A tri-layer structured SrTiO$_3$ (STO) thin films with different tetragonal distortion degree was prepared in order to simultaneously achieve a large relative capacitance change and a small dielectric loss. Highly a-axis textured $Ba_{0.65}Sr_{0.35}TiO_3$ (BST65/35) thin films was grown on Pt/Ti/SiO$_2$/Si substrate for monolithic bolometers by introducing $Ba_{0.65}Sr_{0.35}RuO_3$ (BSR65/35) thin films as buffer layer. With the buffer layer, the leakage current density of BST65/35 thin films were greatly reduced, and the pyroelectric coefficient of $7.6\times10_{-7}$ C $cm^{-2}$ $K^{-1}$ was achieved at 6 V/$\mu$m bias and room temperature.

• 대한전자공학회논문지SD
• /
• 제38권3호
• /
• pp.229-235
• /
• 2001

Si₃N₄/SiO₂/Si₃N₄ 멤브레인에 의해 실리콘 기판으로부터 열차단된 비냉각 초전형 박막 (Ba,Sr)TiO₃ 적외선 검지기를 제작하고, 적외선 검지기의 특성을 논의하였다. 25℃의 공기중에서 쵸핑주파수가 1 ㎐일 때 적외선 검지기는 약 168.8 V/W의 비교적 높은 전압 감응도를 나타내었으나, 매우 작은 신호대잡음비 때문에 약 2.6×10⁴㎝·㎐/sup 1/2//W의 낮은 비검지도를 나타내었다. 또한 출력파형의 쵸핑주파수 및 온도 의존성에 대한 정성적인 해석으로부터 적외선 검지기의 열잡음전압 및 열시정수가 모두 상당히 크다는 것을 알 수 있었다.