• 한국재료학회지
• /
• 제4권4호
• /
• pp.453-458
• /
• 1994

256Mb DRAM에서 박막 커패시터로의 적용을 위해서$(Ba_{0.5}Sr_{0.5)/TiO_3$(BST)박막이 RF Magnetron Sprttering방법에 의해 제조되었다. BST박막의 결정화도는 기판온도가 높아짐에 따라 증가하였고 증착된 박막의 조성은 $(Ba_{0.48}Sr_{0.48)/TiO_{2.93}$이었다. 이때 Pt/Ti장벽층은 Si의 BST계면으로의 확산을 억제하였다. 100kHz에서의 유전상수 및 유전손실은 각각 320 및 0.022이었다. 인가전계도 (Charge Storage Density)는 40fC/$\mu \textrm{m}^{2}$, 누설전류밀도(Leakage Current Density)는 0.8$\mu A/\textrm{cm}^2$ 로서 RF Matnetron sputtering방법에 의해 제조된 BST 박막이 256Mb DRAM 적용 가능함을 보였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.33-36
• /
• 1999

In this paper, $Ba_{0.5}$Sr$_{0.5}$TiO$_3$ thin-films were prepared on Pt/Ti/Si0$_2$/Si substrates by RF magnetron sp-uttering method. We investigated electric and dielectric properties of BST thin-films with various ann-ealing temperature using in-sute RTA. Deposition conditions of BST films were set substrate temperat-ure, 30$0^{\circ}C$ and working gas ratio, Ar:O$_2$=90:10. After BST films deposited, we fabricated a capacitor of MIM structure with Al top electrode for measurement. Post-annealing using RTA performed at 40$0^{\circ}C$, $600^{\circ}C$, 80$0^{\circ}C$ for 60 sec, respectively. Also we exacted crystallization and composition of BST thin-films by XRD analysis. In measurement result, this capacitors showed a dielectric constant of about 200 at 1MHz and leakage current density of 5$\times$10$^{-8}$ A/$\textrm{cm}^2$ at 1.5V Microstructure of BST thin-films exhibited effective quality in low-temperature annealed 71ms than high-temperature annealed 71ms.s.s.

• 한국세라믹학회지
• /
• 제35권7호
• /
• pp.679-684
• /
• 1998

Dielectricand pyroelectric properties of {{{{ { { {Ba }_{0.67 }Sr }_{0.33 } }`TiO_{3 } ^{ } }} (BST) thin plates and films were investigated. For BST thin plates maximum dielectric constant and pyrolelectric coefficient were observed at around 24$^{\circ}C$ and pyroelectric characteristics were improved as applied bias field was increased. When the electric field of 4kV/cm was applied to the thin plates sintered at 140$0^{\circ}C$ the pyroelectric coefficients over 4$\times$10-7C/{{{{ { cm}^{2 }K }} were obtained in the range of 0-4$0^{\circ}C$ BST thin films deposited using rf magnetron sputtering showed [001] preferred orientation at substrate temperatures above 50$0^{\circ}C$ On the contrary to the thin plates the dielectric constants of the thin films gradually increased above 15$^{\circ}C$ and decreased as applied bias field in-creased. The pyroelectric coefficients of thin films were lower than 1/10 those of thin plates.

• 한국진공학회지
• /
• 제11권1호
• /
• pp.1-7
• /
• 2002

RF Magnetron Sputtering 방법으로 $Ba_{0.5}Sr_{0.5}TiO_3$ 박막을 Pt/Ti/$SiO_2$/Si 기판위에 증착하였다. $Ba_{0.5}Sr_{0.5}TiO_3$ 박막 증착시 기판온도는 실온으로 고정시켜주었고, 작업 가스 유량(Ar:$O_2$)과 RF Power는 각각 90:10에서 60:40까지 그리고 50 W와 75 W로 하였다. 또한 박막 증착 후 RTA(Rapid Thermal Annealing)를 이용하여 산소분위기에서 $600^{\circ}C$로 고온 순간 열처리를 하였다. 커패시터 제작을 위해 UHV System의 E-beam evaporator를 이용하여 Pt를 증착하였다. XRD 측정을 통한 구조적 특성에서는 작업 가스 유량과 RF Power에 비해 고온 순간 열처리가 결정화에 기여도가 큼을 확인할 수 있었다. 전기적 특성에서는 RF Power가 50 W이고 열처리를 한 샘플에서 비교적 우수한 특성을 보여주었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.660-663
• /
• 2001

The devices of BST thin films to composite (Ba$\_$0.7/ Sr$\_$0.3/)TiO$_3$using sol-gel method were fabricated by changing of the depositing layer number on Pt/Ti/SiO$_2$/Si substrate. The thin film capacitor to be ferroelectric devices was investigated by structural and electrical properties. The thickness of BST thin films at each coating numbers 3, 4 and 5 times was 2500[${\AA}$], 3500[${\AA}$], 3800[${\AA}$]. The dielectric factor of thin film when the coating numbers were 3, 4 and 5 times was 190, 400 and 460 on frequency 1[MHz]. The dielectric loss of BST thin film was linearly increased by increasing of the specimen area.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.836-839
• /
• 2001

Ba(Zr$_{x}$Ti$_{l-x}$)O$_3$(BZT) thin films of x=0.2 and 150nm thickness were prepared on Pt/SiO$_2$/Si substrate by RF Magnetron Sputtering deposition at several temperature (40$0^{\circ}C$, 50$0^{\circ}C$, $600^{\circ}C$). As the substrates temperature increase, crystallization of the films and high dielectric constants can be obtained. Capacitance of the film deposited at high temperature is more sensitive to the applied voltage than that of the film deposited at low temperature, and the film's breakdown voltage is higher in low temperature.ure.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1232-1235
• /
• 1997

서로 다른 두께를 가진 다층구조 $BaTiO_3$ 박막의 절연신뢰성을 time-zero dielectric breakdown (TZDB) 기법과 time-dependent dielectric breakdown (TDDB) 기법을 사용하여 평가하였으며 통계적 방법을 이용하여 그 결과를 분석하였다. 다층구조 $BaTiO_3$ 박막은 rf-magnetron sputtering 방법으로 ITO가 코팅된 유리기판 위에 형성되었다 TZDB 측정 결과, 박막의 두께가 증가 할수록 최고 빈도수를 보이는 항복전기장의 세기는 낮아지는 것으로 확인되었으며, 두께에 따라 다른 항전기장의 분포를 보였다. TDDB 결과로부터 박막의 두께 증가에 파라 안정적인 시간거동 특성이 확인되었으며 이것은 항전기장의 분포 특성과 관계가 있는 것으로 보인다.

• 한국재료학회지
• /
• 제5권7호
• /
• pp.816-819
• /
• 1995

저압 유기금속 화학 증탁법에 의하여 Pt/Ti/SiO$_2$/Si 기판위에 (Ba$_{1-x}$ , Sr$_{x}$)TiO/$_3$박막이 제조 되었다. 제조된 BST 박막의 결정화도는 증착온도가 증가함에 따라 (100)방향으로 우선 성장하였다. 90$0^{\circ}C$에서 증착한 BST 박막은 100kHz의 주파수에서 유전상수가 365, 유전손실이 0.052를 나타내었다. 인가전계에 따라 축전용량의 변화가 작은 상유전 특성을 보였으며 0.2MV/cm인가 전계에서 축적 전하 밀도(charge storage density)는 60fC/$\mu\textrm{m}$$^2$을, 0.15MV/cm인가 전계 영역에서 누설 전류밀도(leakage current density)는 20nA/$\textrm{cm}^2$을 나타냈다.냈다.

• The Korean Journal of Ceramics
• /
• 제6권3호
• /
• pp.258-261
• /
• 2000

Highly (h00)-oriented (Ba, Sr)TiO$_3$(BST) thin films were grown by pulsed laser deposition on the perovskite LaNiO$_3$(LNO) metallic oxide layer as a bottom electrode. The LNO films were deposited on SiO$_2$/Si substrates by rf-magnetron sputtering method. The crystalline phases of the BST film were characterized by x-ray $\theta$-2$\theta$, $\omega$-rocking curve and $\psi$-scan diffraction measurements. The surface microsturcture observed by scanning electron microscopy was very dense and smooth. The low-frequency dielectric responses of the BST films grown at various substrate temperatures were measured as a function of frequency in the frequency range from 0.1 Hz to 10 MHz. The BST films have the dielectric constant of 265 at 1 kHz and showed multiple dielectric relaxation at the low frequency region. The origin of these low-frequency dielectric relaxation are attributed to the ionized space charge carriers such as the oxygen vacancies and defects in BST film, the interfacial polarization in the grain boundary region and the electrode polarization. We studied also on the capacitance-voltage characteristics of BST films.

• The Korean Journal of Ceramics
• /
• 제6권4호
• /
• pp.333-338
• /
• 2000

$Ba_{0.7}Sr_{0.3}TiO_3$(BST) thin films were deposited simultaneously on various electrodes and buffers by the sputtering technique. When the substrate temperature was varied, the BST thin film on each electrode showed good crystallinity above $550^{\circ}C$ as revealed by X-ray diffraction measurements. The surface morphology, determined by atomic force microscopy, indicated that the roughness of BST thin films on $RuO_2$was substrate dependent. However, BST thin films on Ru electrodes are smoother and showed no substrate dependence, probably because the precursor surface diffusion length was greater than the sinusoidal perturbations of the wavelength.