• 한국세라믹학회지
• /
• 제24권5호
• /
• pp.484-490
• /
• 1987

Diffusion coupling experiment was done to study expansion of body and soild reaction in BaCO3-TiO2 system. Specimen of BaCO3 and TiO2 was formed with Pt-mark's method. Each specimen was fired at interval of 25℃ from 900℃ to 1000℃ for 2hrs. After that, specimen was fixed with resin and polished. Product layers of specimen were observed with SEM and EDS. The result were following; 1. Diffusion component is Ba2+, which diffuse toward TiO2. 2. Large crack between layer of BaCO3 and Ba2TiO4 was generated because of difference of thermal expansion coefficient. 3. Ba2TiO4 is formed to TiO2 body by the reaction of BaTiO3 and BaO and its structure is very porous. 4. BaTiO3 changes immediately to Ba2TiO4 by the reaction of BaO. But BaTiO3 which formed by the reaction of TiO2 and Ba2TiO4 exsists as layer because the diffusion distance of Ba2+ is far.

• Bulletin of the Korean Chemical Society
• /
• 제16권3호
• /
• pp.248-251
• /
• 1995

The crystal structure of Ba46-X, Ba46Al92Si100O384 [a= 25.297(1) Å], has been determined by single-crystal X-ray diffraction techniques in the cubic space group Fd&bar{3}at 21(1) ℃. The crystal was prepared by ion exchange in flowing stream of 0.05 M Ba(OH)2 aqueous solution for 5 days. The crystal was then dehydrated at 380 ℃ and 2 × 10-6 Torr for 2 days. The structure was refined to the final error indices R1= 0.051 and Rw= 0.054 with 369 reflections for which I > 3σ(I). In this structure, all Ba2+ ions are located at the three different crystallographic sites: fourteen Ba2+ ions are located at site Ⅰ, the centers of the double six rings, two Ba2+ ions lie at site Ⅰ', in the sodalite cavity opposite double six rings(D6R's) and another thirty Ba2+ ions are located at site Ⅱ in the supercage. Two Ba2+ ions are recessed ca. 0.27 Å into the sodalite cavity from their three O(3) oxygen plane and thirty Ba2+ ions are recessed ca. 1.11 Å into the supercage from their three O(2) oxygen planes, respectively (Ba(1)-O(3) = 2.76(1) Å, O(3)-Ba(1)-O(3) = 180(0)°, Ba(2)-O(3) = 2.45(1) Å, O(3)-Ba(2)-O(3) = 108(1)°, Ba(3)-O(2)=2.65(1) Å, and O(2)-Ba(3)-O(2)=103.9(4)°).

• 한국세라믹학회지
• /
• 제32권1호
• /
• pp.83-89
• /
• 1995

YBa2Cu3O7-$\delta$, Y2BaCuO5, and binary compounds in the Ba-Cu-O system with the nominal composition of Ba2CuO3, BaCuO2, Ba3Cu4O7, Ba3Cu5O8 were synthesized to investigate the heat evolutions and crystalline phases in the hydration reaction of orthorhombic YBa2Cu3O7-$\delta$ phase. The observed crystalline phases were YBa2Cu3O7-$\delta$, Y2BaCuO5, and BaCuO2, or Ba2Cu3O5＋x, and some amount of noncrystalline phase in the Ba-Cu system comounds. In contact with distilled water, YBa2Cu3O7-$\delta$ and Y2BaCuO5 did not have considerable heat liberation, but in the binary compounds of the Ba-Cu-O system, the amount of total heat liberation was increased with respect to the Cu content. It might be that the reaction of high temperature superconductor YBa2Cu3O7-$\delta$ with water and/or moisture originated from the unusual oxidation state of Cu ion and the presence of amorphous Ba-Cu oxide compound. The degradation of high Tc superconductor by moisture and water could be controlled by restricting the heterogeneous distribution of Tc comlposition and the formation of second phase, such as stable Y2BaCuO5, and the resulting unstable Ba-Cu oxide compound.

• 한국세라믹학회지
• /
• 제33권9호
• /
• pp.1038-1044
• /
• 1996

The variations of sintering and electrical characteristics of semiconducting BaTiO3 ceramics with sintering agents added were investigated comparing the case of BaB2O4 addition to BN and TiO2 addition. When BaB2O4 added in BaTiO3 ceramics the densitifcation of specimen could be acheived more easily and recvealed the better PTCR characteristics than BN and TiO2 addition. As increase of addition of BaB2O4 in BaTiO3 spec imens the slope of resistivity jump also increased but the temperature of maximum resistivity decreased, It was supposed that addition of BaB2O4 led to increase of Ns (acceptor state density) value at grain boundaries.

• 자연과학논문집
• /
• 제8권1호
• /
• pp.61-69
• /
• 1995

$BaTiO_3$는 일반적으로 $BaCO_3$와 $TiO_2$의 고상반응으로 얻어지는데 BaO의 활성이 높고 이차상이 생성되므로 순수하게 합성하기가 어렵다. 순수한 $BaTiO_3$를 얻기 위해서 공침법, 가수분해법등이 연구되고 있으나 출발 원료가 비싸고 제조 공정상 문제로 고상반응으로 합성한 것과 별차이가 없다. 그래서 고상반응의 공정을 개선하는 연구가 다시 진행되고 있으며 본 연구에서도 $BaTiO_3$를 고상반응으로 합성할 때 물성에 좋지 않은 영향을 주는 이차상인 $Ba_2TiO_4$의 생성기구를 밝히고, 그것을 조절하려 했다. $BaTiO_3$의 이론조성중 Ba가 과잉인 영역에서는 $Ba_2TiO_4$가 $TiO_2$가 과잉인 영역에서는 $BaTiO_2O_5$와 $BaTiO_3O_7$이 소지의 팽창에 원인이 되었다. 환원에서 소결되는 $CeAIO_3$와 $BaTiO_3$계의 유전체는 공기중에서 $CeAIO_3$가 분해되고 이때 생성되는 $CeO_2$가 $BaTiO_3$의 전기적 물성에 큰 영향을 주었다.

• 한국세라믹학회지
• /
• 제31권9호
• /
• pp.1005-1011
• /
• 1994

The three different composition of BaTi4O9, Ba2Ti9O20 and BaTi5O11 were prepared by coprecipitation process, and then the dielectric properties of these compounds were measured at low microwave frequencies. The powder showing high level of purity was synthesised by the coprecipition reaction of BaCl2 and TiCl4 where (NH4)2CO3 and NH4OH were used as a deflocculent. Followings are the result of this study: 1. The sintering temperature increased with increasing TiO2 content. 2. BaTi4O9 powder were synthesized as a single phase by this processing technique, but the resultant Ba2Ti9O20 and BaTi5O11 phase existed with Ba2Ti9O20 and BaTi5O11 phases. 3. Single phase BaTi4O9 showed high dielectric constant value of 35, high Q value of 8100.

• 한국결정성장학회지
• /
• 제8권1호
• /
• pp.49-54
• /
• 1998

수열법에 의하여 $BaTiO_3$ 미립자를 합성하였다. 출발원료로는 $TiO_2$와 $Ba(OH)_2{\cdot}8H_2O$를 사용하고 과량의 $Ba(OH)_2{\cdot}8H_2O$를 투입함으로써 증류수만을 용매로 사용하여 $150^{\circ}C$의 저온에서 BaTiO3 미립자를 합성할 수 있었다. 합성된 입자의 형태는 구형에 가까운 부정형이었으며, 입자의 크기는 합성온도 및 Ba/Ti 원자비에 따라 변화되었다.

• 한국세라믹학회지
• /
• 제37권5호
• /
• pp.511-515
• /
• 2000

The effect of Ba2+ ion dissolution with different pH and amount of PAA on microstructural changes of green and sintered bodies and its electrical properties was studied in aqueous nano-size BaTiO3 slurry system. The dissolution of Ba2+ was least at strong base, pH 10.8 and by addition of amount of 0.15 wt% PAA. The green body with the lowest of dissolution of Ba2+ at pH 10.8 and 0.15 wt% PAA had minimum values of average pore size, 40nm and shown high increase of sintered density. The compact sintered at 125$0^{\circ}C$ for 2 hr with highest Ba2+ dissolution had low density and dielectric constant due to abnormal grian growth. However, the sintered body with the lowest Ba2+ dissolution had high sintered density and then shown high dielectric constant.

• 대한화학회지
• /
• 제25권5호
• /
• pp.318-324
• /
• 1981

일차입자의 크기와 응집상태가 다른 두 종류의 $Fe_2O_3$를 부분침전법과 ball-mill 혼합법으로 BaCO$_3$와 혼합한 $BaCO_3-Fe_2O_3$계의 고체반응에 있어 $Fe_2O_3$분체의 영향을 조사하였다. TG, XRD, SEM 등을 측정에 사용하였으며, X-선 회절분석결과 Ba-ferrite의 생성과정은 다음과 같은 연속적인 2단계로 이루어진다는 것을 알았다. $BaCO_3 + 6Fe_2O_3\;{\longrightarrow}\;BaFe_2O_3 + 5Fe_2O_3 + CO_2{\uparrow}\;BaFe_2O_4 + 5Fe_2O_3 \;{\longrightarrow}\;BaFe_{12}O_{19}$ 또 $Fe_2O_3$원료분체의 응집상태와 혼합방법은 고체반응에 현저한 영향을 미친다는 것을 확인했다.

• 한국세라믹학회지
• /
• 제36권12호
• /
• pp.1327-1334
• /
• 1999

Behaviors of abnormal expansion during calcination process of Ba2Ti9O20 ceramics and its related effects on the sintering characteristics were investigated as a function of precursors. When BaCO3 and TiO2 powders were used as starting materials. BaTi4O9 phase which has relatively large molar volume was formed drastically with abnormal ex-pansion during the calcination at 95$0^{\circ}C$ to 115$0^{\circ}C$ ON the contrary using BaTiO3 and TiO2 powders as starting materials led to retardation of the formation of BaTi4O9 phase and concurrently suppressed the abnormal expansion during cal-cination process. Especially the calcined powder of BaTiO3 and TiO2 had advantages in the densification and formation of Ba2Ti9O20 single phase in the sintering process.