• Food Science and Biotechnology
• /
• 제16권4호
• /
• pp.576-579
• /
• 2007

The effects of temperature and Korean bramble (Rubus coreanum Miquel) tissue concentrate on heterocyclic aromatic amine (HAA) formation in fried ground beef patties were investigated. Various amounts of Korean bramble tissue (4.0, 7.0, and 11.0%, w/w) were added to ground beef patties were fried at 2 different temperatures (190 and $225^{\circ}C$) for 10 min/side. It was observed in the fried ground beef patties fried at $190^{\circ}C$ with the addition of 11.0%(w/w) Korean bramble that the mutagenicity decreased by 64%, and formation of 2-amino-3,8-dimethylimidazo[4,5-f]quinoxaline (MeIQx) and 2-amino-I-methyl-6-phenylimidazo[4,5-b]-pyridine(PhIP) reduced by 55 and 86%, respectively. Although no difference in total mutagenicity was shown in patties fried at $225^{\circ}C$ with the addition of 4.0, 7.0, and 11.0%(w/w), different levels of reduction of PhIP formation in patties fried at $225^{\circ}C$ with the addition of 4.0, 7.0, and 11.0%(w/w) were shown 49, 63, and 75%, respectively.

• 대한기계학회논문집B
• /
• 제36권7호
• /
• pp.731-736
• /
• 2012

열플라즈마 시스템을 이용하여 붕소 함유 나노입자를 제조하기 위한 새로운 방법이 시도되었다. $BCl_3$ 와 $CH_4$ 전구체 기체를 열플라즈마 영역으로 분사하여 고온에서 분해시킨 후, 기체상 응핵 및 성장 과정을 통하여 붕소 또는 붕소 카바이드 입자를 제조하였다. X 선 광분자 분석법을 이용하여 입자 표면의 화학적 결합 상태 및 카바이드와 관련된 B-C 결합 구조 내의 붕소와 탄소의 원자 비율을 측정 및 분석하였다. 또한 나노입자 형상 및 크기 분석을 위해 주사식 투과현미경과 전자에너지손실분광법이 이용되었다. 제조된 나노입자는 30-70 nm 내의 크기 분포를 갖고 있으며, $BCl_3$ 와 $CH_4$ 전구체 기체가 각각 20 sccm, 25 sccm 사용되었을 때 B-C 결합 구조 내의 붕소와 탄소의 비는 2.13 이었다.

• 마이크로전자및패키징학회지
• /
• 제6권4호
• /
• pp.35-39
• /
• 1999

The $Li_2O-MgO-MgF_2-SiO_2$glasses with addition of $B_2O_3$ were investigated in order to make glass-ceramics for low temperature firing substrate. Glasses were made by melting at $1450^{\circ}C$ in the electronic furnace and crystallized at $750^{\circ}C$. The crystal phases were polycrystalline of lithium boron fluorphlogopite and lithium fluorhectorite. The crystal shape was chanced to granule type from needle type with increasing $B_2O_3$ content. Average particle size of the glass-ceramics after water swelling was 3.77$\mu\textrm{m}$. The optimum sintering temperature and sintering shrinkage of the substrate were $900^{\circ}C$ and 13.4%, respectively.

• Applied Biological Chemistry
• /
• 제17권2호
• /
• pp.125-137
• /
• 1974

Selenomonas ruminantium 균체(菌體)를 TCA로 가열(加熱) 분해(分解)한 후 chloroform : methanol (1 : 3)로 추출(抽出)한 당지질(糖脂質)을 분리(分離)하고 이 당지질(糖脂質)을 acetone가용부분(可溶部分) spot A화합물(化合物)과 acetone불용부분(不溶部分)에서 ether로 다시 가용부분(可溶部分)을 추출(抽出)한 spot B화합물(化合物)의 두 부분(部分)으로 분리(分離)하고 이 두 화합물(化合物)에 대(對)하여 각각(各各) 그 화학구조(化學構造)를 구명(究明)하며 당지질(糖脂質)의 구조(構造)를 추정(推定)한 바 다음과 같은 결과(結果)를 얻었다. 1. 두 화합물(化合物)의 적외선흡수분석결과(赤外線吸收分析結果) spot A는 amino당(糖)에 O-acyl 및 N-acyl지방산(脂肪酸)이 결합(結合)하였으며 spot B는 amino당(糖)에 O-acyl 및 N-acyl지방산(脂肪酸)이 결합(結合)하고 인(燐)을 함유(含有)하고 있음을 알았다. 2. 두 화합물(化合物)을 GLC에 의(依)하여 지방산조성(脂肪酸組成)을 조사(調査)한 바 spot A.B화합물중(化合物中)에 있는 O-acyl 및 N-acyl 지방산(脂肪酸)은 ${\beta}-OH\;C_{13:0}$지방산(脂肪酸)이 대부분(大部分)이 였는데 저급(低級)의 hydroxy지방산(脂肪酸) ${\beta}-OH\;C_{9:0}$도 특이적(特異的)으로 함유(含有)되여 있음을 알았다. 3. 두 화합물(化合物)을 hydrazine분해(分解)를 시킨 결과(結果)를 paper chromatography로 조사(調査)한 바 spot A화합물(化合物)은 glucosamine 이 2분자(分子) 결합(結合)하여 있는 chitobiose와 같은 Rf 치(値)를 나타냈음으로 2분자(分子)의 glucosamine이 결합(結合)됨을 확인(確認)하고 spot B 화합물(化合物)의 낮은 Rf치(値)는 glucosamine에 인(燐)이 결합(結合)되여 있음을 알았다. 4. spotA화합물(化合物)의 산분해물(酸分解物)을 다시 ninbydrine으로 산화분해(酸化分解) 시키면 arabinose만이 생기는 것으로 보아 glucosamine의 amino기(基)는 $C_2$의 위치(位置)에 결합(結合)하여 있음을 알았다. 5. N-acetyl화(化)한 spot A에 $NaBH_4$를 추리(處理)한 결과(結果) glucosamine의 전량(全量)이 반감(半減)하는 것으로 보아 2분자(分子)의 glucosamine이 결합(結合)되여 있는 것을 알 수 있고 Morgan-Elson반응(反應) 및 $NaIO_4$분해(分解)에 의(依)하여 2개(個)의 glucosamine은 1.6결합(結合)임을 확인(確認)하였다. 6. N-acetyl화(化)한 spot A.B화합물(化合物)에 ${\beta}-N-acetyl$ glucosarninidase를 반응(反應)시킨 결과(結果) spot A화합물(化合物)은 100% N-acetyl glucosamine으로 분해(分解)되고 spot B화합물(化合物)은 분해(分解)되지 않았으므로 spot A화합물(化合物)만이 ${\beta}$결합(結合)을 하고 있음을 알았다. 7. $^{32}P$함유(含有) spot B화합물(化合物)에 phosphodiesterase 및 phosphomonoesterase를 작용(作用)시킨 결과(結果) phosphodiesterase는 반응(反應)치 않고 phosphomonoesterase에 의(依)하여 100% $^{32}P$가 유리(遊離)되는 것으로 보아 glucosamine 2분자(分子)에 한계의 인(燐)이 monoester결합(結合)을 하고 있음을 알 수 있다. 8. spot A화합물(化合物)은 glucosaminiyl ${\beta}-1.6-glucosamine$의 결합(結合)을 하였고 O-acyl 및 N-acyl지방산(脂肪酸)이 결합(結合)되여 있으며 주지방산(主脂肪酸)은 ${\beta}-OH\;C_{13:0}$임을 알았다. 9. spot B화합물(化合物)도 glucosaminyl ${\beta}-1.6-glucosamine$의 결합(結合)을 하고 O-acyl 및 N-acyl지방산(脂肪酸)이 결합(結合)되여 있으며 주지방산(主脂肪酸)은 ${\beta}-OH\;C_{13:0}$이나 인(燐)이 monoester결합(結合)을 하고 있는 것이 spot A화합물(化合物)과 특이(特異)함을 알았다.

• Reproductive and Developmental Biology
• /
• 제28권4호
• /
• pp.227-233
• /
• 2004

This study was conducted to investigate the effect of various addition and exclusion time of glucose (Control: no addition, A: 24～72 h, B: 24～48 h, C: 48～72 h, D: 0～72 h, E: 0～48 h, F: 0～24 h and 48～72 h, G: 0～24 h) on embryonic developmental capacity of 2-cell embryos in mice. Developed blastocysts were assessed for mean cell number by differential staining. The zona-intact blastocyst (ZiB) rates were higher (p<0.05) in group B than control. However, the zona-escape blastocyst (ZeB) rates were not significantly different in all groups. At 72 h, total blastocyst (ZiB + ZeB) formation rates were not significantly different in all groups. The mean cell number was not significantly different among all groups. The inner cell mass (ICM) cell number was higher (p<0.05) in group F than control, group A, B and G. The trophectoderm (TE) cell number was higher (p<0.05) in control than group A and D. The %ICM was higher (p<0.05) in group C, D and F than control. The ICM : TE ratio was not significantly different in all groups. Between control and glucose group, no significant difference was observed in the total blastocysts (ZiB + ZeB) formation rates. Also, no significant difference was observed in the mean cell number, ICM cell number and ICM : TE ratio. However the TE cell number was higher (p<0.05) in control than glucose group and %ICM was higher (p<0.05) in glucose group than control. In conclusion, glucose added in culture medium was not inhibitory on blastocyst formation but glucose added for 48 ～72 h in culture medium increases %ICM of blastocysts in mice.

• 한국주조공학회지
• /
• 제9권4호
• /
• pp.320-326
• /
• 1989

Titanium-Boron-Aluminium master alloys are used extensively to grain-refine a wide range of aluminium alloys. This experiment was performed by various amounts of AlTi5B1 addition to the technical aluminium alloys, and also by changing cast temperature and hold time of the melts. The macrostructures were shown that with increasing the addition of AlTi5B1 to the melts, the grain became finer. In the case of cast temperature high enough over $900^{\circ}C$, the grain became coarser, but hold time change not affected on the grain refinement. Particles of $TiAl_3$, and $TiB_2$ were found in the grains and grainboundaries. The important role of grain refinement in this experiment were mainly $TiAl_3$, and also $TiB_2$ those have been confirmed in TEM, SEM, EDS, WDX and X-ray diffraction.

• Biomolecules & Therapeutics
• /
• 제9권3호
• /
• pp.162-166
• /
• 2001

Helicobacter pylori is a major cause of gastric-associated diseases. In our previous study, the Adhesin/CTXA2B was expressed as insoluble recombinant chimeric protein derived from the H. pylori adhesin genetically coupled to CTXA2B subunit in Escherichia coli. Since it is very important to optimize IPTG concentration, culture temperature and composition of medium to maximize cell growth and productivity, these conditional growth factors were determined for increasing the productivity of the expressed Adhesin/CTXA2B chimeric protein in Escherichia coli JM101 carrying pTEDhpa/ctxa2b. Our data demonstrate that optimal medium for increased production of chimeric protein was a YCP/Glu medium composed of 2% yeast extract, 1% casamino acid, phosphate solution [0.3% $KH_2P0_4$, 0.4% $Na_2HP0_4$, 0.25% ($NH_4)_2HPO_4$], and 0.5% glucose. In addition, optimal concentration of IPTG was 1 mM and culture temperature, $37^{\circ}C$.

• 한국세라믹학회지
• /
• 제46권5호
• /
• pp.467-471
• /
• 2009

Effects of boron and carbon on the densification and thermal decomposition of an AlN-SiC-$TiB_2$ system were investigated. $SiO_2$ was mostly removed by the addition of carbon, while $Al_2O_3$ formed $Al_4O_4C$ and promoted the densification of the systems above $1850^{\circ}C$. Rather porous specimens were obtained without the additives after hot pressing at $2100^{\circ}C$, while densification was mostly completed at $2000^{\circ}C$ by using the additives. The sintering temperature decreased further to $1950^{\circ}C$ by applying spark plasma sintering. The additives promoted the shrinkage of AlN by forming a liquid phase which was originated from the carbo- and boro-thermal reduction of $Al_2O_3$ and AlN.

• Advanced Composite Materials
• /
• 제18권4호
• /
• pp.351-364
• /
• 2009

The thermal stability and elevated temperature mechanical properties of $SiC_P$/Al-11.7Fe-1.3V-1.7Si (Al-11.7Fe-1.3V-1.7Si reinforced with SiC particulates) composites sheets prepared by spray deposition (SD) $\rightarrow$ hot pressing $\rightarrow$ rolling process were investigated. The experimental results showed that the composite possessed high ${\sigma}_b$ (elevated temperature tensile strength), for instance, ${\sigma}_b$ was 315.8 MPa, which was tested at $315^{\circ}C$, meanwhile the figure was 232.6 MPa tested at $400^{\circ}C$, and the elongations were 2.5% and 1.4%, respectively. Furthermore, the composite sheets exhibited excellent thermal stability: the hardness showed no significant decline after annealing at $550^{\circ}C$ for 200 h or at $600^{\circ}C$ for 10 h. The good elevated temperature mechanical properties and excellent thermal stability should mainly be attributed to the formation of spherical ${\alpha}-Al_{12}(Fe,\;V)_3Si$ dispersed phase particulates in the aluminum matrix. Furthermore, the addition of SiC particles into the alloy is another important factor, which the following properties are responsible for. The resultant Si of the reaction between Al matrix and SiC particles diffused into Al matrix can stabilize ${\alpha}-Al_{12}(Fe,\;V)_3Si$ dispersed phase; in addition, the interface (Si layer) improved the wettability of Al/$SiC_P$, hence, elevated the bonding between them. Furthermore, the fine $Al_4C_3$ phase also strengthened the matrix as a dispersion-strengthened phase. Meanwhile, load is transferred from Al matrix to SiC particles, which increased the cooling rate of the melt droplets and improved the solution strengthening and dispersion strengthening.

• Environmental Engineering Research
• /
• 제25권4호
• /
• pp.529-535
• /
• 2020

The present study investigated the photodegradation of synthetic organic dye; violet-3B, without and with the addition of C-N-codoped TiO₂ catalyst using a visible halogen-lamp as a light source. The catalyst was synthesized by using a peroxo sol-gel method with free-organic solvent. The effects of initial dye concentration, catalyst dosage, and pH solution on the photodegradation of violet-3B were examined. The efficiency of the photodegradation process for violet-3B dye was higher at neutral to less acidic pH. The kinetics reaction rate of photodegradation of violet-3B dye with the addition of C-N-codoped TiO₂ followed pseudo-first order kinetics represented by the Langmuir-Hinshelwood model, and increasing the initial concentration of dyes decreased rate constants of photodegradation. Photodegradation of 5 mg L^-1 violet-3B dye achieved 96% color removal within 240 min of irradiation in the presence of C-N-codoped TiO₂ catalyst, and approximately 44% TOC was removed as a result of the mineralization.