• Journal of Information Technology Applications and Management
• /
• 제9권4호
• /
• pp.179-204
• /
• 2002

The purpose of this study is to empirically Investigate the critical success factors affecting the participation of B2B e-marketplace from a perspective of buyers and sellers. The research model presented in this study suggests that the success of B2B e-marketplace depends on the degree of participation of buyers and sellers. It is hypothesized that the participation of buyers and sellers is related with several contextual factors. The contextual factors included: (a) industry and market factor; (b) Internal environment factor; (c) product factor; (d) Inter-organizational factor; and (e) B2B e-marketplace system and strategy factor. An analysis of data from 31 buyer firms and 31 seller firms reveals that those five factors have a significant effect on the participation and success of B2B e-marketplace. The implications of the study are discussed and further research directions are proposed.

• 한국재료학회지
• /
• 제14권12호
• /
• pp.829-834
• /
• 2004

Annealing of $Cu(B)/Ti/SiO_2$ in vacuum has been carried out to investigate the effects of Ti underlayer on microstructure in $Cu(B)/Ti/SiO_2$ structures. For comparison, $Cu(B)/Ti/SiO_2$ structures was also annealed in vacuum. Three different temperature dependence of Cu growth can be seen in $Cu(B)/Ti/SiO_2$; B precipitates- pinned grain growth, abnormal grain growth, normal grain growth. The Ti underlayer having a strong affinity for B atoms reacts with the out-diffused B to the Ti surface and forms titanium boride at the Cu-Ti interface. The formation of titanium boride acts as a sink for the out-diffusion of B atoms. The depletion of boron in grain boundaries of Cu films, as results of the rapid diffusion of B along the grain boundaries and the insufficient segregation of B to the grain boundaries, induces grain boundaries to migrate and causes the abnormal grain growth. The increased bulk diffusion coefficient of B within Cu grains can be responsible for the normal grain growth occurring in the annealed $Cu(B)/Ti/SiO_2\;at\;600^{\circ}C$. In contrast, the $Cu/SiO_2$ structures show only the abnormal growth of grains and their sizes increasing as the temperature increases above $400^{\circ}C$.

• Asia Marketing Journal
• /
• 제20권3호
• /
• pp.1-15
• /
• 2018

Dongwon Systems established in 1977 to exclusively supply Dongwon tuna cans, the parent company. Instead of its stable management and profits by relying on the parent company, the company was not complacent and started innovating and challenging new markets. Dongwon Systems decided to expand the business area and pioneer new markets so that it becomes the first domestic company to successfully expand into independent businesses other than parent company products. Such success of Dongwon Systems was driven by its differentiated B2B strategies. Unlike the characteristics of usual B2B companies, Dongwon Systems has been thinking both of its client companies and end-consumers. In this case-study, we will explore how Dongwon Systems became the No.1 packaging solution company in Korea through technology innovation in the aspects of unique B2B marketing strategy. The key success factor can be summarized in three ways; product and technology development with customer centric mind-set, systematically extending new markets through business diversification, and marking Southeast Asia as a bridgehead for its global strategy. It is expected that the current case study of Dongwon Systems will be able to provide implications for B2C companies as well as B2B companies that try to expand their business portfolio and global business areas through B2B marketing case analysis.

• Biomolecules & Therapeutics
• /
• 제31권3호
• /
• pp.340-349
• /
• 2023

Mad2B (Mad2L2), the human homolog of the yeast Rev7 protein, is a regulatory subunit of DNA polymerase ζ that shares sequence similarity with the mitotic checkpoint protein Mad2A. Previous studies on Mad2B have concluded that it is a mitotic checkpoint protein that functions by inhibiting the anaphase-promoting complex/cyclosome (APC/C). Here, we demonstrate that Mad2B is activated in response to cisplatin-induced DNA damage. Mad2B co-localizes at nuclear foci with DNA damage markers, such as proliferating cell nuclear antigen and gamma histone H2AX (γ-H2AX), following cisplatin-induced DNA damage. However, unlike Mad2A, the binding of Mad2B to Cdc20 does not inhibit the activity of APC/C in vitro. In contrast to Mad2A, Mad2B does not localize to kinetochores or binds to Cdc20 in spindle assembly checkpoint-activated cells. Loss of the Mad2B protein leads to damaged nuclei following cisplatin-induced DNA damage. Mad2B/Rev7 depletion causes the accumulation of damaged nuclei, thereby accelerating apoptosis in human cancer cells in response to cisplatin-induced DNA damage. Therefore, our results suggest that Mad2B may be a critical modulator of DNA damage response.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1252_1253
• /
• 2009

The composites were fabricated by adding 0, 15, 20, 25[vol.%] Zirconium Diboride(hereafter, $ZrB_2$) powders as a second phase to Silicon Carbide(hereafter, SiC) matrix. The physical, mechanical and electrical properties of electroconductive SiC ceramic composites by spark plasma sintering(hereafter, SPS) were examined. Reactions between $\beta$-SiC and $ZrB_2$ were not observed in the XRD analysis The relative density of mono SiC, SiC+15[vol.%]$ZrB_2$, SiC+20[vol.%]$ZrB_2$ and SiC+25[vol.%]$ZrB_2$ composites are 90.97[%], 74.62[%], 77.99[%] and 72.61[%] respectively. The XRD phase analysis of the electroconductive SiC ceramic composites reveals high of SiC and $ZrB_2$ and low of ZrO2 phase. The electrical resistivity of mono SiC, SiC+15[vol.%]$ZrB_2$, SiC+20[vol.%]$ZrB_2$ and SiC+25[vol.%]$ZrB_2$ composites are $4.57{\times}10^{-1}$, $2.13{\times}10^{-1}$, $1.53{\times}10^{-1}$ and $6.37{\times}10^{-2}[{\Omega}{\cdot}cm]$ at room temperature, respectively. The electrical resistivity of mono SiC, SiC+15[vol.%]$ZrB_2$, SiC+20[vol.%]$ZrB_2$ and SiC+25[vol.%]$ZrB_2$ are Negative Temperature Coefficient Resistance(hereafter, NTCR) in temperature ranges from 25[$^{\circ}C$] to 100[$^{\circ}C$]. It is convinced that SiC+20[vol.%]$ZrB_2$ composite by SPS can be applied for heater above 1000[$^{\circ}C$].

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.704-709
• /
• 2004

The wear behavior and the mechanical property of Cu-$TiB_2$ composites were examined. Cu-$TiB_2$ composites were fabricated by hot extrusion and cold drawing with $TiB_2$ contents(1$\∼$5vol.$\%$) and the size of $TiB_2$ particles(10$\mu$m and 20$\mu$m). The pin-an-disk wear test was carried out under dry sliding wear conditions which loads varied with from 20N to 100N. At the time, counterpart wear material used SM45C. The experimental results showed that the friction coefficient and wear rate decreased with increasing the $TiB_2$ contents and decreasing the size of $TiB_2$ particle. Also, the depth of plastically deformed zone decreased with increasing the $TiB_2$ contents and decreasing the size of $TiB_2$ particle.

• 멤브레인
• /
• 제25권2호
• /
• pp.115-122
• /
• 2015

졸겔법에 의해서 trimethylborate (TMB)/tetraethylorthosilicate (TEOS) 몰비 0.01, 온도 $800^{\circ}C$에서 $SiO_2{\cdot}B_2O_3$가 제조되었다. 그리고 제조된 $SiO_2{\cdot}B_2O_3$와 PDMS[poly(dimethylsiloxane)]로부터 PDMS-$SiO_2{\cdot}B_2O_3$ 복합막을 제조하고 막의 물리화학적 특성을 TG-DTA, FT-IR, BET, X-ray, SEM에 의해 조사하고 그리고 $H_2$와 $N_2$의 투과도와 선택도를 조사하였다. TG-DTA, BET, X-ray, FT-IR 측정에 의하면 $SiO_2{\cdot}B_2O_3$는 무정형의 다공성 $SiO_2{\cdot}B_2O_3$였으며, 기공의 평균직경은 $37.7821{\AA}$, 표면적은 $247.6868m^2/g$이었다. TGA 측정에 의하면 PDMS 내에 $SiO_2{\cdot}B_2O_3$가 첨가되었을 때 PDMS-$SiO_2{\cdot}B_2O_3$ 복합막의 열적 안정성은 향상되었다. SEM 관찰에 의하면 $SiO_2{\cdot}B_2O_3$는 약 $1{\mu}m$ 크기로 PDMS 내에 덩어리 상태로 뭉쳐서 분산되어 있었다. 기체투과실험에 의하면 PDMS 내에 $SiO_2{\cdot}B_2O_3$ 함량이 증가하면 $H_2$와 $N_2$의 투과도는 증가하였고, 질소보다 Lenard Jones 분자지름이 작은 $H_2$의 투과도는 $N_2$의 투과도보다 컸으며, 선택도($H_2/N_2$)는 감소하였다.

• 통상정보연구
• /
• 제16권5호
• /
• pp.319-342
• /
• 2014

세계 경제가 글로벌화가 가속화되고 국내 기업도 해외 시장에 진출하는 한편, 해외 글로벌 기업 또한 한국시장에 진출하여 성과를 보이고 있다. 이러한 한국 진출 기업이 한국시장에서 신속하게 성과를 보이는데 있어서 기술적 역량 요인, 마케팅 역량 요인, 그리고 해외 네트워크 요인이 신속한 글로벌 성과에 어떠한 영향을 미치는지를 파악하고자 하였다. 또한 기업 유형에 따라 영향 관계가 있는지를 규명하는데 있다. 연구 목적을 달성하기 위하여 가설을 설정하고 이를 검증하기 위하여 구조방정식과 회귀분석을 활용하였으며 주요 결과는 다음과 같다. 첫째, 기술적 요인 중 기술적 혁신성과 제품 차별성은 신속한 글로벌화에 통계적으로 유의미하게 긍정적인 영향을 미치고 있어, 신속한 글로벌화에 매우 중요한 선행요인으로 해석된다. 둘째, 마케팅 요인 중 마케팅 지식획득과 브랜드 명성 또한 통계적으로 유의미하게 긍정적인 영향을 미치고 있어, 또한 신속한 글로벌 성과에 중요한 요인임을 알 수 있었다. 셋째, 한국 시장 내 네트워크 범위와 해외 네트워크 강도 또한 모두 통계적으로 유의미하게 영향을 미치고 있어, 해외 네트워크 요인은 신속하게 글로벌 성과에 매우 중요한 요인임을 밝히고 있다. 한편, 해외 자회사 기업 유형(B2C, B2B) 조절변수 효과에 대한 가설 검증으로 회귀분석을 통한 분석 결과, B2C 해외 자회사 기업이 B2B 해외 자회사 기업보다 본 연구모형에서는 설명력이 31.9% 증가를 보였다. 또한 B2C 해외 자회사의 경우 마케팅 역량이, B2B 해외 자회사의 경우 상대적으로 기술적 역량 요인이 통계적으로 유의미하게 차이가 보였다. 따라서 기업유형이 기술적, 마케팅 역량 요인 그리고 네트워크 요인이 신속한 글로벌화에 영향을 주는데 조절효과가 있음을 알 수 있었다. 결론적으로 본 연구를 통하여 실무적 측면에서는 우선 기업의 신속한 글로벌 성과를 높이기 위해서는 선행 요인 중 마케팅 요인과 기술적 요인, 한국 시장 네트워크 등은 중요한 선행 요인임을 확인하였으며, 한편 학문적으로 본 연구 결과는 기업이 신속하게 해외로 진출하는 영향요인을 체계적으로 심층 연구에 기여하였다라고 여긴다.

• Journal of Ceramic Processing Research
• /
• 제13권spc1호
• /
• pp.37-41
• /
• 2012

A lithium ion conducting borosilicate glass was fabricated by a conventional melt quenching technique from a mixture of Li2CO3, B2O3 and SiO2 powders. The Li ion conductivity of the lithium borosilicate glasses was evaluated in terms of the SiO2/B2O3 ratio. In the Li2O-B2O3-SiO2 ternary glass, the glass forming region decreases with an increasing Li2O content. At the same Li2O, the crystallization tendency of the glass samples increases with the SiO2/B2O3 ratio, resulting in a reduced glass forming region in the Li2O-B2O3-SiO2 ternary glass. The electrical conductivity moderately depends on the SiO2/B2O3 ratio in the Li2O-B2O3-SiO2 ternary glass. The conductivity of the glasses slightly increases with the SiO2/B2O3 ratio. The observed phenomenon can be explained by the modification of the glass structure as a function of the SiO2 content.

• 한국진공학회지
• /
• 제4권3호
• /
• pp.334-341
• /
• 1995

IB-AI-VIB2 및 IB-AI-VIB2 :Co2+ 결정을 고순도 원소를 출발 물질로 하고 iodine을 수송 매체로 사용하여 chemical transport reaction method로 성장시켰다. 성장된 결정의 결정구조는 chalcopyrite 구조였으며, energy gap은 direct band gap으로 3.514~1.814 eV 정도로 주어졌으며, cobalt를 불순물로 첨가할 때 energy gap은 감소하였다. IB-AI-VIB2 :Co2+ 결정에서 첨가된 cobalt가 모체결정의 Td symmetry site에 Co2+ ion으로 위치하여, Co2+ ion의 energy 준위 사이의 전자전이에 기인하는 불순물 광흡수 peaks가 나타났다. 이 불순물 광흡수 peaks에 결정장 이론을 적용하여 구산 1st-order spin-orbit coupling parameter(λ)는 -183~ -189cm-1정도였고, 2nd-order spin-orbit coupling parameter(P)는 225~239 cm-1정도였으며, crystal field parameter(Dq)는 328~395cm-1, Racah parameter(B)는 531~552cm-1정도였다.