• Smart Structures and Systems
• /
• v.1 no.3
• /
• pp.267-282
• /
• 2005

This work describes ongoing development of an embedded sensor system for the early detection and prevention of deterioration of reinforcing steel tendons within reinforced concrete. These devices will evaluate the condition of the steel tendon using ultrasonic techniques and then wirelessly transmit this data to the outside world without human intervention. The ultrasonic transducers and the interpretation of the sensed signals that allow detection and prognosis of tendon condition are detailed. Electrical characterization of concrete mixtures used in bridge construction is conducted and a wideband microstrip antenna is designed and fabricated to operate between 2.4 and 2.5 GHz when embedded in such a medium. Simulations and measurements of the embedded antenna element are presented. Transceiver selection and implementation are discussed as well as future work in operational protocols, sensor networking, and power sources. By implementing commercially available off-the-shelf components whenever possible, these devices have the potential to save millions of dollars a year in evaluation, repair and replacement of reinforced concrete.

• Journal of information and communication convergence engineering
• /
• v.5 no.3
• /
• pp.185-193
• /
• 2007

This paper evaluates the performance combining space-time transmit diversity (STTD) and an efficient channel estimator (ECE) for wideband code division multiple access (WCDMA) systems in various mobile channels. Using decision variable (DV), we also derive the analytic bit error rate (BER) and mean square error (MSE) for WCDMA applying ECE for STTD schemes. The simulation results show that the ECE performance is superior to the previous works in [1] as because we use additional pilot diversity which is so called secondary common control physical channel (S-CCPCH). The performance in case of the channel estimator using only one-channel or two-channel is worse than that of an ECE as about the maximum 4 dB at BER 1.0E-3 satisfying voice service over Rician fading channel. Our results show that, even with ICE, an ECE algorithm are effective in improving the output SNR and significantly reduce the error floor. In addition, the simulation results investigated in this paper also reveal that WCDMA combining an ECE and the STTD scheme could provide appreciable performance improvements in Rayleigh fading channel.

• The Plant Pathology Journal
• /
• v.18 no.5
• /
• pp.231-236
• /
• 2002

Bemisia tabaci Genn. is an important pest worldwide because of its ability to cause damage by direct feeding and its role as a vector of some viruses including geminiviruses. The first report of Tobacco leaf curl virus (TLCV), a Geminiviruses, in Indonesia was in 1932 when the virus was found infecting tobacco plants in Central Java. The characteristic symptoms of TLCV included upward curling of the leaf edge, vein thickening, and sometimes the occurrence of enation on the underside of the leaves. Basic studies were carried out to elucidate the characteristics of TLCV transmission by its vector, B. tabaci. A single whitefly was able to transmit the virus and the efficiency of transmission was increased when the number of adult whiteflies was increased up to 20 per plant. Inoculation access period of 1 h could cause transmission up to 20% and the optimum inoculation access period was 12 h. Acquisition access period of 30 minutes resulted in 70% transmission while 1(10% transmission occurred with a 24-h acqui-sition access period. The virus was proven to be persistently but not transovarially transmitted. Discrete fragments of 1.6 kb were observed when polymerase chain reaction method was applied to detect the virus in viruliferous nymphs and individual adults of B. tabaci, while no bands were obtained from non-viruliferous nymphs and adults.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.12
• /
• pp.2839-2846
• /
• 2014

New VHF band for use in VDE is determined by WRC-12 due to the overload of AIS VDL, and the system characteristics of the VDE is recommended as ITU-R M. 1842-1. CS-TDMA, a multiple access method of AIS class B, is recommended as that of the VDE. It is inefficient for CS-TDMA just applying the report interval used in AIS class B to transmit high speed data with higher payload in the aspect of efficiency. In this paper, a simulation is executed in order to determine adequate report interval according to the number of active ships that affects directly network traffic. To this end, the performance of CS-TDMA, which includes the number of received packets, reception success rate, channel utilization, and collision rate, is investigated via a simulation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.3
• /
• pp.311-318
• /
• 2024

In this paper, a design for a radio frequency(RF) and infrared(IR) absorber with metasurfaces is discussed in microwave frequency bands. The RF absorber includes double layers of metasurfaces to operate in S- and X-bands. Effects of sheet resistance of the metasurfaces and thicknesses of dielectric supporting layers on reflection responses are investigated. An IR stealth layer incorporates an array of conductive grids with slits to reflect IR signals but to transmit RF signals and visible rays. Periodicity of the grids and slits is studied for transmission responses in the X-band and a surface area ratio. Reflection responses of the RF/IR multispectral absorber are found to be lower than -10 dB and -16 dB in the S- and X-bands, respectively, from full-wave simulation. Finally, the RF/IR multispectral absorber is fabricated and its reflection responses are measured to verify designed performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.10A
• /
• pp.807-815
• /
• 2003

MultiCode-CDMA (MC-CDMA) system of chip level MPSK incorporating with clipper (MP-CDMA)[l] shows constant envelope signal which can mitigate the performance degradation due to nonlinear transmit amplifier. In this paper, modulation is modified to carry out differential encoded MPSK rather than MPSK. The modified system is called DMP-CDMA. DMP-CDMA using differential detection has advantages on receiver complexity and pilot overhead. However, it is inferior to coherent detection by about 4.0dB due to inherent power inefficiency of noncoherent detection and the error propagation. Multiple symbol differential detection is employed in order to improve DMP-CDMA using differential detection. As the result, the performance of DMP-CDMA system is improved about 3.6dB compared to differential detection.

• Applied Microscopy
• /
• v.35 no.1
• /
• pp.23-30
• /
• 2005

Many studies have been performed on the bovine leukemia virus (BLV) since bovine leukosis had been reported in 1968 in Korea. However, there was no report on the ultrastructural examination of BLV. An attempt to detect C-type viral particles in the cultured peripheral blood lymphocytes of Holstein-Friesian dairy cattle, was made to determine whether in vitro viral expression might be used as a reliable method to identify the cow which is likely to transmit BLV. In transmission electron microscopic (TEM) examination, the virus particles were found predominantly outside of the lymphocytes even though a few particles were also observed within the membrane bound cytoplasmic vacuoles. All of them were C-type particles consisting of a central, electron-dense core separated by a clear area from a limiting envelope with a unit membrane structure. Virus particles were easily detected in the lymphocyte which was cultured with medium supplemented with either T-lymphocyte mitogen (conconavalin A) or B-lymphocyte mitogen (lipopolysaccharide). Identical viral particles, although fewer, were also consistently present in the lymphocytes cultured with medium which was containing foetal bovine serum (FBS) only and which was containing neither FBS or mitogen. By contrast, no virus particle was detected in extensive examination of lymphocytes before culture. In conclusion, the BLV cultivation and detection methods established in this study could be used as a tool to identify and eliminate the cattle which can transmit the BLV.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.6 no.1
• /
• pp.32-38
• /
• 2003

Purpose: Hepatic allografts from donors with hepatitis B core antibody have been demonstrated to transmit hepatitis B virus (HBV) infection to recipients after liver transplantation (LT). The efficacy of hepatitis B immune globulin (HBIg) to prevent de novo hepatitis B was investigated by comparing active immunization in the early phase to HBIg monotherapy in the late phase of pediatric liver transplants at Samsung Medical Center. Methods: Among pediatric liver transplants, from May, 1996 to June, 2002, 15 recipients who were hepatitis B surface antigen (HBsAg) (-) received an allograft from a donor with hepatitis B core antibody (HBcAb) (+). Except two who died from unrelated causes, eleven of 13 recipients were HBsAb (+), and 2 were naive (HBsAb(-), HBcAb(-)). All patients were vaccinated for HBV before LT. In the early phase (January, 1997~November, 1997, 3 patients), HBsAb (+) recipients received booster vaccination after LT. In the late phase (December, 1997~, 10 patients), all recipients were given booster vaccination and received HBIg therapy in order to maintain HBsAb titer greater than 200 IU/L. Lamivudine was given in one case because of severe side effect of HBIg. We retrospectively analyzed the effect of the preventive therapy for de novo hepatitis B through medical records. Results: De novo hepatitis B developed in three of 13 recipients (23.1%). All of 3 patients who received active immunization in the early phase became HBsAg (+) at 7~19 months after transplantation. One of them was naive before LT and the other two were HBsAb (+). All of 10 recipients who were given HBIg in the late phase remained HBsAg (-) at 7~55 months' follow-up. Conclusion: Passive immunization with HBIg was effective for prevention of de novo hepatitis B in HBsAg (-) recipients of hepatic allografts from HBcAb (+) donors.

• Investigative Magnetic Resonance Imaging
• /
• v.18 no.4
• /
• pp.303-313
• /
• 2014

Purpose : In-vivo conductivity reconstruction using transmit field ($B_1{^+}$) information of MRI was proposed. We assessed the accuracy of conductivity reconstruction in the presence of statistical noise in complex $B_1{^+}$ map and provided a parametric model of the conductivity-to-noise ratio value. Materials and Methods: The $B_1{^+}$ distribution was simulated for a cylindrical phantom model. By adding complex Gaussian noise to the simulated $B_1{^+}$ map, quantitative conductivity estimation error was evaluated. The quantitative evaluation process was repeated over several different parameters such as Larmor frequency, object radius and SNR of $B_1{^+}$ map. A parametric model for the conductivity-to-noise ratio was developed according to these various parameters. Results: According to the simulation results, conductivity estimation is more sensitive to statistical noise in $B_1{^+}$ phase than to noise in $B_1{^+}$ magnitude. The conductivity estimate of the object of interest does not depend on the external object surrounding it. The conductivity-to-noise ratio is proportional to the signal-to-noise ratio of the $B_1{^+}$ map, Larmor frequency, the conductivity value itself and the number of averaged pixels. To estimate accurate conductivity value of the targeted tissue, SNR of $B_1{^+}$ map and adequate filtering size have to be taken into account for conductivity reconstruction process. In addition, the simulation result was verified at 3T conventional MRI scanner. Conclusion: Through all these relationships, quantitative conductivity estimation error due to statistical noise in $B_1{^+}$ map is modeled. By using this model, further issues regarding filtering and reconstruction algorithms can be investigated for MREPT.

• Journal of IKEEE
• /
• v.7 no.2 s.13
• /
• pp.236-244
• /
• 2003

In this paper, RF and IF circuits for mobile terminals which have usually been implemented using expensive BiCMOS processes are designed using CMOS circuits, and a Tx CMOS RF/IF single chip for PCS applications is designed. The designed circuit consists of an IF block including an IF PLL frequency synthesizer, an IF mixer, and a VGA and an RF block including a SSB RF mixer and a driver amplifier, and performs all transmit signal processing functions required between digital baseband and the power amplifier. The phase noise level of the designed IF PLL frequency synthesizer is -114dBc/Hz@100kHz and the lock time is less than $300{\mu}s$. It consumes 5.3mA from a 3V power supply. The conversion gain and OIP3 of the IF mixer block are 3.6dB and -11.3dBm. It consumes 5.3mA. The 3dB frequencies of the VGA are greater than 250MHz for all gain settings. The designed VGA consumes 10mA. The designed RF block exhibits a gain of 14.93dB and an OIP3 of 6.97dBm. The image and carrier suppressions are 35dBc and 31dBc, respectively. It consumes 63.4mA. The designed circuits are under fabrication using a $0.35{\mu}m$ CMOS process. The designed entire chip consumes 84mA from a 3V supply, and its area is $1.6㎜{\times}3.5㎜$.