• 한국재료학회지
• /
• 제22권4호
• /
• pp.207-210
• /
• 2012

The preparation of $Sm_2O_3$ doped $CeO_2$ in Igepal CO-520/cyclohexane reverse micelle solutions has been studied. In the present work, we synthesized nanosized $Sm_2O_3$ doped $CeO_2$ powders by reverse micelle process using aqueous ammonia as the precipitant; hydroxide precursor was obtained from nitrate solutions dispersed in the nanosized aqueous domains of a micro emulsion consisting of cyclohexane as the oil phase, and poly (xoyethylene) nonylphenylether (Igepal CO-520) as the non-ionic surfactant. The synthesized and calcined powders were characterized by Thermogravimetry-differential thermal analysis (TGA-DTA), X-ray diffraction analysis (XRD), and Transmission electron microscopy (TEM). The crystallite size was found to increase with increase in water to surfactant (R) molar ratio. Average particle size and distribution of the synthesized $Sm_2O_3$ doped $CeO_2$ were below 10 nm and narrow, respectively. TG-DTA analysis shows that phase of $Sm_2O_3$ doped $CeO_2$ nanoparticles changed from monoclinic to tetragonal at approximately $560^{\circ}C$. The phase of the synthesized $Sm_2O_3$ doped $CeO_2$ with heating to $600^{\circ}C$ for 30 min was tetragonal $CeO_2$. This study revealed that the particle formation process in reverse micelles is based on a two step model. The rapid first step is the complete reduction of the metal to the zero valence state. The second step is growth, via reagent exchanges between micelles through the inter-micellar exchange.

• 반도체디스플레이기술학회지
• /
• 제21권2호
• /
• pp.11-14
• /
• 2022

In this work, we evaluated the Al₂O₃ film, which was deposited by atomic layer deposition, degraded by exposure to harsh environments. The Al₂O₃ films deposited by atomic layer deposition have long been used as a gas diffusion barrier that satisfies barrier requirements for device reliability. To investigate the barrier and mechanical performance of the Al₂O₃ film with increasing temperature and relative humidity, the properties of the degraded Al₂O₃ film exposed to the harsh environment were evaluated using electrical calcium test and tensile test. As a result, the water vapor transmission rate of Al₂O₃ films stored in harsh environments has fallen to a level that is difficult to utilize as a barrier film. Through water vapor transmission rate measurements, it can be seen that the water vapor transmission rate changes can be significant, and the environment-induced degradation is fatal to the Al₂O₃ thin films. In addition, the surface roughness and porosity of the degraded Al₂O₃ are significantly increased as the environment becomes severer. the degradation of elongation is caused by the stress concentration at valleys of rough surface and pores generated by the harsh environment. Becaused the harsh envronment-induced degradation convert amorphous Al₂O₃ to crystalline structure, these encapsulation properties of the Al₂O₃ film was easily degraded.

• 한국재료학회지
• /
• 제22권6호
• /
• pp.316-320
• /
• 2012

$Co_3O_4$, $Al_2O_3$ and $Co_3O_4$/$Al_2O_3$ mesoporous powders were prepared by a sol-gel method with starting matierals of aluminum isopropoxide and cobalt (II) nitrate. A P123 template is employed as an active organic additive for improving the specific surface area of the mixed oxide by forming surfactant micelles. A transition metal cobalt oxide supported on alumina with and without P123 was tested to find the most active and selective conditions as a heterogeneous catalyst in the reaction of styrene epoxidation. A bBlock copolymer-P123 template was added to the staring materials to control physical and chemical properties. The properties of $Co_3O_4$/$Al_2O_3$ powder with and without P123 were characterized using an X-ray diffractometer (XRD), a Field-Emission Scanning Electron Microscope (FE-SEM), a Bruner-Emmertt-Teller (BET) surface analyzer, and $^{27}Al$ MAS NMR spectroscopy. Powders with and without P123 were compared in catalytic tests. The catalytic activity and selectivity were monitored by GC/MS, $^1H$, and $^{13}C$-NMR spectroscopy. The performance for the reaction of epoxidation of styrene was observed to be in the following order: [$Co_3O_4$/$Al_2O_3$ with P123-1173 K > $Co_3O_4$/$Al_2O_3$ with P123-973 K > $Co_3O_4$-973 K>$Co_3O_4$/$Al_2O_3$-973 K > $Co_3O_4$/$Al_2O_3$ with P123-1473 K > $Al_2O_3$-973 K]. The existence of ${\gamma}$-alumina and the nature of the surface morphology are related to catalytic activity.

• 멤브레인
• /
• 제27권3호
• /
• pp.226-231
• /
• 2017

이산화탄소 분리를 위해 이온성 액체/금속 산화물 복합막이 제조되었으며, 이온성 액체로서 1-butyl-3-methylimidazolium tetrafluoroborate ($BMIM^+BF_4{^-}$)와 금속산화물로서 $Al_2O_3$가 사용되었다. 13 nm의 $Al_2O_3$가 이온성 액체 $BMIM^+BF_4{^-}$에 도입되었을 때, 복합체 분리막의 성능은 $CO_2/N_2$ 선택도 30.5과 $CO_2$ 투과도 45.7 GPU로 관찰되었다. neat $BMIM^+BF_4{^-}$ 분리막의 성능($CO_2/N_2$ 선택도 5와 $CO_2$ 투과도 17 GPU)에 비해서 성능이 증가한 이유는 $Al_2O_3$의 옥사이드 층과 이온성 액체 내 자유로운 이온농도의 상승으로 인해 $CO_2$ 용해도가 상승한 것으로 확인되었다. 특히 $Al_2O_3$ 나노입자는 질소 기체에 대해서 장애물로서 작용함으로써 질소기체의 투과도가 감소하여 결과적으로 이산화탄소 분리 성능은 급격히 증가하였다.

• 한국세라믹학회지
• /
• 제19권4호
• /
• pp.293-299
• /
• 1982

The effects of $MnO_2$ and $Cr_2O_3$ on the Piezoelectrictric properties of Pb(Mg1/2W1/2)0.3 Ti0.4 Zr0.3O3 Ceramics. Electromechanical properties in the system in connection with the sintering temperature and the effects of $MnO_2$ and $Cr_2O_3$ addition. The dielectric constant of the ceramics decreased with the additions of $MnO_2$ while the additions of $Cr_2O_3$ increased the value. The Planar coupling factor (Kp) of the ceramics with 0.2wt% $MnO_2$ and with 0.2wt% $Cr_2O_3$ gave the highest value of 0.52 and 0.513 as sintered at 106$0^{\circ}C$, 108$0^{\circ}C$, respectively. The value of mechanical Q-factor were in parallel with the fired density of the ceramics. The optical micrography of the sintered bodies showed that the additions of $MnO_2$ promoted the grain growth, while the additions of $Cr_2O_3$ retarded the grain growth.

• 한국재료학회지
• /
• 제24권7호
• /
• pp.357-362
• /
• 2014

Thermal barrier coatings(TBCs) are being applied in many industrial fields such as thermal power generation, aviation and seasonal fields. $ZrO_2-Y_2O_3$(8%) thermal spray coating powders are commercially used as thermal-barrier coating materials to protect against oxidation and corrosion of heat-resistant alloys at elevated temperatures. Currently, $ZrO_2-Y_2O_3$(8%) thermal-spray powder is made using the industrial co-precipitation process, which is very complex and requires a lot of time. In this study, orthorhombic $ZrO_2$ and $Y_2O_3$ powders were fabricated by mechanical mixing, which is more economical than the co-precipitation process. A tetragonal, yttria-stabilized zirconia(YSZ) coating-layer was produced by plasma spraying, using orthorhombic $ZrO_2-Y_2O_3$(8%) powder. Our experimental results indicate that $ZrO_2-Y_2O_3$(8%) mixed powder can be used economically in industry because it is no longer necessary to make this powder by liquid and gas-phase methods.

• Korean Chemical Engineering Research
• /
• 제55권3호
• /
• pp.436-442
• /
• 2017

Fischer-Tropsch 합성(F-T 합성)은 석탄, 바이오매스, 천연가스 등을 개질하여 얻은 합성 가스(CO, $H_2$)를 촉매를 이용하여 탄화수소로 전환 하는 기술이다. Fischer-Tropsch 합성에 이용되는 촉매는 활성 금속, 조촉매, 지지체로 구성되는데 이들의 종류와 조성은 반응의 활성 및 생성물 선택도에 영향을 미친다. 본 연구에서는 ${\gamma}-Al_2O_3$와 $SiO_2$ 혼합 지지체의 조성이 Fiscsher-Tropsch 반응의 활성과 생성물 선택도에 미치는 영향을 알아 보기위해, ${\gamma}-Al_2O_3/SiO_2$ 혼합 지지체를(100/0 wt%, 75/25 wt%, 50/50 wt%, 25/75 wt%, 0/100 wt%) 이용하여 함침(impregnation)법으로 철 촉매를 제조하였다. 촉매의 물리적 특성은 질소 물리 흡착 법과 X-선 회절 분석법을 통해 분석 하였고, 고정층 반응기에서 Fischer-Trosch 반응을 $300^{\circ}C$, 20bar에서, 60시간 동안 수행 하였다. 촉매의 물리적 특성 분석 결과 촉매의 BET 표면적은 ${\gamma}-Al_2O_3$의 조성이 감소함에 따라 감소하였으며, 촉매 기공의 부피 및 평균 크기는 지지체 조성이 ${\gamma}-Al_2O_3/SiO_2$ (50/50 wt%)인 경우를 제외 하고 증가하는 경향을 보였다. 또한, X-선 회절 분석법을 통해 ${\alpha}-Fe_2O_3$의 입자 크기를 계산한 결과 ${\gamma}-Al_2O_3$의 조성이 감소함에 따라 입자 크기가 감소 하였다. Fischer-Tropsch 합성 결과 ${\gamma}-Al_2O_3$의 조성이 감소함에 따라 CO 전환율은 감소 하였으며, C1-C4의 선택도는 ${\gamma}-Al_2O_3$의 조성이 25 wt%일 때 까지 감소하였으며 이와 반대로, C5+의 선택도는 ${\gamma}-Al_2O_3$의 조성이 25 wt%일 때 까지 증가 하였다.

• 한국주조공학회지
• /
• 제2권3호
• /
• pp.16-24
• /
• 1982

For the purpose of development of domestic carburizer, when the basicity of ash in carburizer was changed from $Na_2O/Al_2O_3+SiO_2$ ; 0.06 to $Na_2O/Al_2O_3+SiO_2$ ; 0,196wt%, using $Na_2O$ as flux for domestic graphite resource (Bong Myung armorphous graphite), carburizing efficiency was improved as basicity increased, optimum basicity value was $Na_2O/Al_2O_3+SiO_2$ ; 0.151. This means that $Na_2O$ contributed to lower viscosity of slag and raise occurence probability of specific reaction surface between molten iron and carburizer. The experiment of effect of general characteristics offecting carburizing ability of this carburizer was performed, the result is that 10/30 mesh was optimum size of the carburizer and as carbon equivalent of molten iron was higher, carburizing ratio was lowered, but when si concentration was below 1.8% in general cast iron melting region, recovery showed 75-85%. As agitation rate of molten iron and temperature interval were higher, Carburizing ratio was increased and showed max, 94%. Desulfurizing phenomena of molten iron by $Na_2O$ in carburizer didn't appear.

• 한국세라믹학회지
• /
• 제32권9호
• /
• pp.1056-1064
• /
• 1995

95Pb(Mg1/3Nb2/3)O3-5PbTiO3 (hereinafter designated as 95PMN-5PT) system was prepared by the columbite-precursor method with 2 mol% excess PbO to compensate the PbO loss during thermal process. The amount of CuO was 1~10 mol%, and the effects of CuO addition on the dielectric properties of this system have been investigated. From the microstructures, XRD analysis and dielectric measurements, the solubility limit of CuO in 95PMN-5PT was found to be around 3 mol%. Lattice parameter and Curie temperature were found to be decreased as the amount of CuO increased up to the solubility limit. This result confirmed that the Cu2+-ions substituted the Pb2+-ions. It was revealed that the addition of CuO on 95PMN-5PT promoted the sinterability and properties. The room temperature dielectric constant, the loss factor and the specific resistivity of the specimens processed with optimum conditions were 23000, 1%, and 8$\times$1011Ω.cm, respectively.

• 한국세라믹학회지
• /
• 제27권1호
• /
• pp.7-12
• /
• 1990

The influence of MnO2 on the sintering property and PTCR behavior of(Ba0.8Sr0.2)TiO2 has been investigated. And the densities, grain sizes and electrical resitivities of specimens were measured as a function of doping with Mn ion of varying concentration. The density and grain size of the sintered specimens were almost the same regardless of MnO2 addition up to 0.2mol% MnO2. But in the case of 0.25mol% MnO2 addition, abnormal grain growth was appeared. So the grain size distribution was wide and density decreased greatly. The room-temperature resistivity increased as Mn content increased and the temperature coefficient of resistivity was highest in the case of 0.15mol% MnO2 addition.