• 한국세라믹학회지
• /
• 제17권1호
• /
• pp.20-26
• /
• 1980

The crystallization behaviors of slag-based glass in $CaO-MgO-Al_2O_3-SiO_2(-Na_2O)$ system have been studied. The mother glass containing 16.50 CaO, 7.50MgO, 19.70Al2O3, 50.80SiO3 and 2.09wt% $Na_2O$ was prepared by using Korean domestic raw materials such as granulated slag, serpentine, sea sand and etc. The glass-ceramics composed of major crystalline phase diopside was produced by the heat treatment in a temperature range from 850$^{\circ}$ to 9$25^{\circ}C$ for 0-6hr. The composition and morphology of diopside phase formed in the system were examined by X-ray diffraction analysis and electron microscopy. The kinetic measurements such as J.M. A plot and Arrhenius plot indicated that the process of nucleation of the initially formed diopside phase could be described from the view point of instantaneous nucleation. It was also demonstrated that the linear crystal growth of diopside phase was proceeded by short range diffusion of $Mg^{2+}$ and $Ca^{2+}$ ion. The microstructures of the resulting glass-ceramics were consisted of leafroidal shaped crystalline aggregations.

• 에너지공학
• /
• 제20권3호
• /
• pp.171-177
• /
• 2011

본 연구에서는 폴리비닐알코올(PVA)을 전해질 막으로 이용하기 위하여 가교제로서 글루타르알데히드(GLA)와 무기물 첨가제로 알루미늄실리케이트($Al_2O_3{\cdot}3SiO_2$)를 사용하여 PVA/GLA/$Al_2O_3{\cdot}3SiO_2$ 복합막을 제조하였다. PVA/GLA/$Al_2O_3{\cdot}3SiO_2$ 복합막은 GLA의 비율이 증가함에 따라 함수율이 감소되었고, 알루미늄실리케이트 함량이 증가함에 따라 함수율 향상이 예상되어 수소이온 전도도가 향상되는 경향을 보였다. 제조된 고분자의 가교결합은 IR과 함수율의 경향성으로 확인되었다. 제조된 고분자의 열분석은 TGA에 의해 수행되었다. TGA의 분석결과 PVA/GLA 복합막은 가교결합으로 인하여 PVA보다 열안정성이 우수하였으며, 복합막의 알루미늄실리케이트의 비율이 증가할수록 열안정성이 더욱 증대되는 것을 알 수 있었다. 본 연구에서 제조된 복합막은 열안전성을 갖으며 $60^{\circ}C$까지는 양이온전도도가 증가하는 경향을 갖지만 $90^{\circ}C$로 온도가 높아짐에 따라 성능이 낮아지는 경향을 보였다. 따라서 보다 적극적인 노력을 통하여 향후 이온전도성 복합 전해질막으로 적용 가능성을 타진해야 할 것으로 기대된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.551-554
• /
• 2000

The stability of $Pr_6$$O_{11}$-based ZnO varistors doped with $Y_2$$O_3$ was investigated under various d.c. stresses. The varistors were sintered at $1350^{\circ}C$ for 1h in the addition range of 0.0 to 4.0 mol% $Y_2$$O_3$. The varistors doped with $Y_2$$O_3$ exhibited much higher nonlinearity than that without $Y_2$$O_3$. In Particular, the varistors containing 0.5 mol% $Y_2$$O_3$ showed very excellent V-I characteristics, which the nonlinear exponent was 51.19 and the leakage current was 1.32 $\mu\textrm{A}$. And these varistors also showed an excellent stability, which the variation rate of the varistor voltage and the nonlinear exponent were -0.80% and -2.17%, respectively, under 4th d.c. stress, such as (0.80 $V_ {1mA}$/$90^{\circ}C$/12h)+(0.85 $V_{1mA}$/$115^{\circ}C$/12h)+(0.90 $V_{1mA}$/$120^{\circ}C$/12h)+(0.95 $V_{1mA}$/$125^{\circ}C$/12h). Consequently, since $Pr_ 6$$O_{11}$-based ZnO varistors doped with 0.5 mol% $Y_2$$O_3$ have an excellent stability as well as good nonlinearity, it is expected to be usefully used to develop the superior varistors in future.

• 한국세라믹학회지
• /
• 제36권7호
• /
• pp.734-741
• /
• 1999

Al2O3와 t-ZrO2 분말의 압분체를 공기중 150$0^{\circ}C$ 및 1$600^{\circ}C$에서 2시간 소결하여 제조된 입자복합체의 미세구조와 기계적 성질을 조사하였다. 소수의 미세한 구상의 ZrO2입자는 Al2O3의 입내에 존재하였으나 대분분은 입계에 존재하여 Al2O3의 입계를 고정시키는 것이 가능하였고, 따라서 Al2O3의 입성장을 둔화시켰다. 소결할 동안 입계 ZrO2 입자의 조대회는 응집된 ZrO2 입자내에서의 입계의 소멸과 Al2P3 입계의 이동에 의해서 끌어 당겨진 ZrO2 입자의 합체(coalescence)에 의해서 일어날 수 있었다. ZrO2의 첨가에 의한 Al2O3의 기계적 성질의 변화는 기지상인 Al2O3의 미세구조와 분산된 ZrO2 입자의 크기와 구조에 의존하였다.

• 한국표면공학회지
• /
• 제49권1호
• /
• pp.75-80
• /
• 2016

$In_2O_3$ nanowires were coated with $Co_3O_4$ nanoparticles to investigate the improvement of ethanol gas sensing performance compared with as-synthesized $In_2O_3$ nanowires. Scanning electron microscopy showed that the nanowires synthesized by VLS mechanism had diameters and lengths of approximately 50-100 nm and a few micrometers, respectively. $Co_3O_4$ nanoparticles produced by hydrothermal method was in the size range of a few to a few tens nm. As-synthesized and $Co_3O_4$ nanoparticles coated $In_2O_3$ nanowires sensors exhibited responses of 1.96% and 4.57%, respectively for the ethanol gas concentration of 200 ppm at $200^{\circ}C$. The underlying mechanism for the improved responses of $Co_3O_4$ nanoparticles coated $In_2O_3$ nanowires sensors is discussed.

• 한국세라믹학회지
• /
• 제21권2호
• /
• pp.121-126
• /
• 1984

The dielectric properties of $BaTiO_3$ containing 0~0.3mol% and ZnO respectively as additives were investigated as a function of temperature from $25^{\circ}C$ to 14$0^{\circ}C$ and frequency from 24 KHz to 15MHz. The density of sintered $BaTiO_3$ was increased with addition of increasing to 0.15mol% amounts of $Sb_2O_3$ and the dielectric constant was also increased. This is due to space charge polarization with Ba vacancies. Above 0.15mol% $Sb_2O_3$ the density was decreased and the dielectric constant was also decreased due to occuring the discharge through voids. The density of sintered $BaTiO_3$ was decreased with addition of increasing to 0.15mol% amounts of ZnO and the dielectric constant was decreased due to occuring the discharge through voids. Above 0.15mol% ZnO the density was increased and the dielectric constant was also increased.

• 한국전기전자재료학회논문지
• /
• 제30권7호
• /
• pp.432-436
• /
• 2017

IZO transistors with $Al_2O_3$ as gate dielectrics have been investigated. To improve permittivity in an ambient dielectric layer, we grew $Al_2O_3$ by atomic layer deposition directly onto the substrates. Then, we prepared IZO semiconductor solutions with 0.1 M indium nitrate hydrate [$In(NO_3)_3{\cdot}xH_2O$] and 0.1 M zinc acetate dehydrate [$Zn(CH_3COO)_2{\cdot}2H_2O$] as precursor solutions; the IZO solution made with a molar ratio of 7:3 was then prepared. It has been found that these oxide transistors exhibit low operating voltage, good turn-on voltage, and an average field-effect mobility of $0.90cm^2/Vs$ in ambient conditions. Studies of low-voltage driving of IZO transistors with atomic layer-deposited high-k $Al_2O_3$ as gate dielectric provide data of relevance for the potential use of these materials and this technology in transparent display devices and displays.

• 한국주조공학회지
• /
• 제5권3호
• /
• pp.19-26
• /
• 1985

This study has been carried out to examine into wettability of Cu-5%Sn alloy in $Al_2O_3$, MgO, $SiO_2$ and graphite, respectively and investigated into the change in macrostructure of Cu-5%Sn alloy according to kind and mixing rate of mold-coating. The results obtained from the experiment are summerized as follows; 1. Cu Cu-5%Sn alloy, wettabilities of $Al_2O_3$ and MgO were good, on the other hand, wettabilities of $SiO_2$ and graphite were bad. 2. The fine equiaxed zone was created because of the role of $Al_2O_3$ and MgO as preferential nucleation sites. 3. Notwithstanding change of mixing rate of $SiO_2$ in mold coating the equixed zone was not created. 4. The area of equiaxed zone was varied according to mixing rate in the case of using $Al_2O_3$ and MgO in mold-coating.

• 한국세라믹학회지
• /
• 제31권9호
• /
• pp.981-988
• /
• 1994

Crystallizable glasses with precipitation of celsian were prepared for the purpose of insulating dielectric layers for the devices such as integrated circuit substrates. Crystallization behavior of these glasses were studied by DTA, SEM, XRD analysis and by the measurement of dielectric properties. The base composition of the glass-ceramic consists in weight percent of 30% SiO2, 10% Al2O3, 26% BaO, 10% CaO, 10% ZnO, 8%TiO2 and 6% B2O3. 2-6 wt% Y2O3 were selected as the nucleating agent to promote monoclinic celsian formation. As a result, in barium-rich glasses containing 4~6wt% Y2O3 , monoclinic celsian was developed as major crystalline phase in the temperature range of 850~90$0^{\circ}C$. Also, the dielectric constant and quality factor of these glass-ceramics were about 9 and more than 1000, respectively.

• 한국세라믹학회지
• /
• 제11권2호
• /
• pp.3-10
• /
• 1974

For the manufacture of the silver-yellow glass, silver nitrate was used as a colorant in the base glass of $K_2O$-CaO-$SiO_2$ system. The latter in which the optimum condition was revealed showing beautiful yellow color had been selected among others after the preparatory studies to choose base glass. Other base glass systems considered were $Na_2O$-CaO-$SiO_2$, $R_2O$-PbO-$SiO_2$ and $R_2O$-PbO-BaO-$SiO_2$. The color developed on the specimen in various conditions was examined, using spectorphotometer, in term of the changes in absorbance with wavelength in the visible range. Experimental variables were the amount of the colorant and the additives, reheating temperature and time. The additives such as ZnO, BaO, $B_2O_3$ and $As_2O_3$ were added to increase the coloring action. It was observed that as the amount of silver increased in the base glass the absorbance around $410{\mu}m$ showed the increasing tendency, but the width of absorption curve was wider. Hence, the optimum amount of silver appeared to be 0.11~0.12%. It was found that ZnO was effective additive when present about 0.1%, while $As_2O_3$ ineffective rather retarding the coloration. Borax and $BaCO_3$ were proved effective when contained separately, but appeared ineffective when coexisted. Proper reheating temperature and time was ranged 550~$580^{\circ}C$ and 50~60 minutes. The higher the reheating temperature and the longer the reheating time, the absorbance was increased, while the width of absorption curve was wider. The colored glass prepared in the present experimental condition was found to have good water-resistance for the decorative purpose.