No, I.J.;Shin, P.K.;Kim, H.K.;Kim, Y.W.;Lim, Y.C.;Park, K.S.;Chung, M.Y.
Proceedings of the KIEE Conference
/
2006.07c
/
pp.1359-1360
/
2006
lTO(Indium-Tin-Oxide) was used as anode material for OLED. Characteristics of ITO have great effect on efficiency of OLEDS(Organic light emitting diodes). ITO surface was treated by Nd:YAG laser in order to improve its chemical properties, wettability, adhesive property and to remove the surface contaminants while maintaining its original function. In this study, main purpose was to improve the efficiency of OLEDs by the ITO surface treatment: ITO surface was treated using a Nd:YAG(${\lambda}=266nm$, pulse) with a fixed power of 0.06[w] and various stage scanning velocities. Surface morphology of the ITO was investigated by AFM. Test OLEDs with surface treated ITO were fabricated by deposition of TPD (HTL), Ald3 (ETL/TML) and Al (cathode) thin films. Device performance of the OLEDs such as V-I-L was investigated using Source Measurement Unit (SMU: Keithly. Model 2400) and Luminance Measurement (TOPCON. BM-8).
Purpose: The grindability of binary Ti-X%Zr(X=10,20,40) alloys in order to develop a Ti alloy with better machinability than unalloyed titanium has been evaluated. Methods: Experimental Ti-Zr alloys were made in an argon-arc melting furnace. Slabs of experimental alloys were ground using a SiC abrasive wheel on an electric handpiece at circumferential speeds(12000,18000,25000 or 30000rpm) by applying a force(200gr). Grinding rate was evaluated by measuring the amount of metal volume removed after grinding for 1 minute and the volume ratio of metal removed compared to the wheel material lost, which was calculated from the diameter loss (grinding ratio). Experimental datas were compared to those for cp Ti(commercially pure titanium) and Ti-6%Al-4%V alloy were used controls. Results: It was observed that the grindability of Ti-Zr alloys increased with an increase in the Zr concentration. More, they are higher than cp Ti, particularly the Ti-20%Zr alloy exhibited the highest grindability at all circumferential speeds. There was significant difference in the grinding rate and grinding ratio between Ti-20%Zr alloy and cp Ti at any speed(p<0.05). Conclusion: By alloying with Zr, the Ti exhibited better grindability at all circumferential speeds. the Ti-20%Zr alloy has a great potential for use as a dental machining alloy.
$K_2CO_3$-based dry regenerable sorbents were prepared by spray-drying techniques to improve mass produced $K_2CO_3-Al_2O_3$ sorbents (KEP-CO2P, hereafter), and then tested for their $CO_2$ sorption capacity by a $2,000Nm^3/h$ (0.5 MWe) $CO_2$ capture pilot plant built for Unit 3 of the Hadong thermal power station in 2010. Each of the sample sorbents contained 35 wt.% $K_2CO_3$ as the active materials with various support materials such as $TiO_2$, MgO, Zeolite 13X, $Al_2O_3$, $SiO_2$ and hydrotalcite (HTC). Their physical properties and reactivity were tested to evaluate their applicability to a fluidized-bed or fast transport-bed $CO_2$ capture process. The $CO_2$ sorption capacity and percentage utilization of $K_2CO_3$-MgO based sorbent, Sorb-KM2, was $8.6g-CO_2/100g$-sorbents and 90%, respectively, along with good mechanical strength for fluidized-bed application. Sorbs-KM2 and KT were almost completely regenerated at $140^{\circ}C$. No degradation of Sorb-KM by $SO_2$ added as a pollutant in flue gas was observed during a cycle test.
Proceedings of the Korean Vacuum Society Conference
/
2010.02a
/
pp.177-177
/
2010
고효율 비정질 실리콘 박막 태양전지 제작을 위해서는 광파장대에서 optical confinement 능력을 최대화할 수 있는 기술이 필수적이다. 효율적인 photon trapping을 위해서는 back reflector를 사용하거나 전면전극인 투명전도성막의 표면에 요철을 형성하여 포획된 태양광의 내부 반사를 증가시키거나 전면 투명전극에서 반사를 감소시켜 태양광의 travel length를 증가시키는 방법이 일반적이며, 이를 통해 흡수층의 효율을 최대화할 수 있다. 이 중 전면전극으로 사용되는 투명전도성막은 불소가 도핑된 tin-oxide가 주로 사용되었으나, 최근 들어 Al이 도핑된 산화아연막을 이용한 비정질 실리콘 박막 태양전지 개발에 대한 연구도 활발히 진행되고 있다. 투명전극 증착후 표면의 유효면적을 증가시키기 위해 염산 용액을 이용하여 표면 텍스쳐링을 수행한다. 그후 흡수층인 p-i-n 층을 플라즈마 화학기상증착법을 이용하여 형성하는 것이 일반적이다. 이때 표면처리 된 투명전극은 수소플라즈마에 대해 특성이 변하지 않아야 고효율 비정질 실리콘 박막 태양전지 제조에 적용될 수 있다. 본 연구에서는 표면처리 된 AZO 투명전극의 수소플라즈마에 의한 특성 변화에 대해 고찰하였다. 먼저 AZO 투명전극은 스퍼터링 공정을 적용하여 $1\;{\mu}m$두께로 증착하였고, 0.5 wt%의 HCl 용액을 이용하여 습식 식각을 수행하였다. 수소플라즈마 처리 조건은 $H_2$ flow rate 30 sccm, working pressure 20 mtorr, RF power 300 W, Temp $60^{\circ}C$ 이며 3분간 진행하였다. 표면형상은 수소플라즈마 전 후에는 큰 차이를 보이지 않았으며 AZO의 grain size는 각각 220 nm, 210 nm로 관찰되었다. 투명전극의 가장 중요한 특성인 가시광선 영역에서의 투과도는 수소플라즈마 처리전에는 90 % 이상의 투과도를 보였으나, 수소플라즈마 처리 후에는 85 %로 약간 저하된 특성을 보였다. 그러나 이는 박막 태양전지용 전면전극으로 사용하기 위한 투과도인 80 % 이상을 만족하는 결과로, 비정질 박막 실리콘 태양전지 제작에 사용될 수 있다. 또 하나의 중요한 특성인 Haze factor 역시 수소플라즈마 처리 전 후 모두 10 이상의 값을 나타냈다. 하지만 고효율 실리콘 박막 태양전지에 적용하기 위해서는 Haze factor를 증가시키는 공정 개발에 대한 추가 연구가 필요하다.
Rammah, Y.S.;Tekin, H.O.;Sriwunkum, C.;Olarinoye, I.;Alalawi, Amani;Al-Buriahi, M.S.;Nutaro, T.;Tonguc, Baris T.
Nuclear Engineering and Technology
/
v.53
no.1
/
pp.282-293
/
2021
This paper examines gamma-ray shielding properties of SBC-Bx glass system with the chemical composition of 40SiO2-10B2O3-xBaO-(45-x)CaO- yZnO- zMgO (where x = 0, 10, 20, 30, and 35 mol% and y = z = 6 mol%). Mass attenuation coefficient (µ/ρ) which is an essential parameter to study gamma-ray shielding properties was obtained in the photon energy range of 0.015-15 MeV using PHITS Monte Carlo code for the proposed glasses. The obtained results were compared with those calculated by WinXCOM program. Both the values of PHITS code and WinXCOM program were observed in very good agreement. The (µ/ρ values were then used to derive mean free path (MFP), electron density (Neff), effective atomic number (Zeff), and half value layer (HVL) for all the glasses involved. Additionally, G-P method was employed to estimate exposure buildup factor (EBF) for each glass in the energy range of 0.015-15 MeV up to penetration depths of 40 mfp. The results reveal that gamma-ray shielding effectiveness of the SBC-Bx glasses evolves with increasing BaO content in the glass sample. Such that SBC-B35 glass has superior shielding capacity against gamma-rays among the studied glasses. Gamma-ray shielding properties of SBC-B35 glass were compared with different conventional shielding materials, commercial glasses, and newly developed HMO glasse. Therefore, the investigated glasses have potential uses in gamma shielding applications.
Proceedings of the Mineralogical Society of Korea Conference
/
2003.05a
/
pp.15-15
/
2003
Hydroxylapatite는 석회동굴 생성물의 표면이나 또는 생성정지선에서 쉽게 관찰할 수 있으며, 암적갈색을 띄고 있어 생성물의 흑화현상에 기여하고 있다. 특히, 박쥐 서식처나 그 주위의 동굴생성물 표면에서 다량의 hydroxylapatite가 관찰된다. 본 연구에서는 SEM-EDS와 EPMA, XRD를 이용하여 고수동굴(충북 단양군 가곡면 고수리, 천연기념물 제256호, 1976년에 개방), 성류굴(경북 울진군 근남면 장평리, 천연기념물 제155호, 1963년에 개방)과 기하동굴(강원도 평창군 미탄면 마하리, 미개방동굴) 내에서 채취한 hydroxylapatite 로 구성되어 있는 흑색 피각의 현미경적 조직을 연구하였다. Hydroxylapatite 피각은 모암(고수동굴과 성류굴에서는 calcite, 기하동굴에서는 calcite와 dolomite)의 표면에 약 0.3 mm의 두께로 존재하며 hydroxylapatite가 calcite와 dolomite를 교대하고 있다. 피각의 단면은 전자현미경하에서 비교적 밝은 부분인 hydroxylapatite와 상대적으로 어둡게 보이는 cellophane으로 구성되어 있다. Cellophane은 피각의 바깥 부위에 그리고 hydroxylapatite은 피각의 안쪽에 주로 분포하며 hydroxylapatite가 cellophane을 교대하고 있는 것으로 보아 cellophane으로부터 hydroxylapatite가 형성된 것으로 보인다. cellophane과 hydroxylapatite가 보여주는 조직을 구분하면: 1) 교질조직 (colloform texture) (두께: 1.2 ~ 3 $\mu\textrm{m}$, cellophane 층에 지름 0.5 ~ 1 $\mu\textrm{m}$의 voids가 존재), 2) 망상조직 (reticulate texture) (voids 크기 지름 0.5 ~ 1 $\mu\textrm{m}$), 3) 섬조직 (sea-and-island texture) (크기: 지름 2 ~ 4 $\mu\textrm{m}$) 등이다. Cellophane이 주로 분포하는 피각의 가장자리 부분에는 망상조직과 섬조직 및 void (지름: 약 10 $\mu\textrm{m}$)가 다량 존재하여, 망상조직과 void가 분포하는 곳에는 SO$_2$가 함유된다. 피각 표면에서 Ca, P, Si, Al 이외에 C와 S가 다량 함유되어 있는 막대모양의 박테리아 (지름: 1 $\mu\textrm{m}$, 길이: 1 ~ 10 $\mu\textrm{m}$)들의 집합체가 관찰되는데 박테리아가 피각 표면에 닿아 있는 부분은 박테리아 사이에 hydroxylapatite가 채워져 하나의 덩어리를 이룬다. 망상조직의 void의 크기와 박테리아의 지름이 비슷한 것으로 보아 망상조직은 박테리아 주위에 hydroxylapatite가 침전되고 그 후 박테리아가 있던 자리가 void로 남게 되면서 형성된 것으로 생각되며, 망상조직과 void에 존재하는 SO$_2$는 박테리아로부터 유래된 것으로 사료된다. 모암에는 P가 함유되어 있지 않기 때문에 hydroxylapatite의 P는 외부 물질(박쥐 분비물)에서 유래된 것으로 생각된다. hydroxylapatite 피각의 조직이 형태적으로 박테리아와 비슷한 것은 hydroxylapatite 생성에 미생물이 관여했다는 것을 암시한다.
Proceedings of the Korean Vacuum Society Conference
/
2011.02a
/
pp.117-117
/
2011
유기물과 무기물이 결합한 나노 복합체를 사용하여 제작한 비휘발성 메모리 소자는 공정이 간단하고 저렴할 뿐만 아니라 휘어짐이 가능하다는 장점 때문에 많은 연구가 진행되고 있다. 코어-쉘 나노 입자를 포함한 고분자 박막으로 제작한 비휘발성 메모리 소자에서 쉘의 종류와 유무에 따른 메모리 윈도우와 기억시간에 미치는 영향에 대한 연구는 아주 적다. 본 연구에서는 CdTe-CdSe 코어-쉘 나노 입자 및 CdTe 나노 입자가 Poly(9-vinylcarbazol) (PVK) 박막에 분산되어 있는 나노복합체를 기억 매체로 사용하는 비휘발성 메모리 소자들을 제작하여 쉘의 유무에 따른 메모리 윈도우와 기억시간의 변화를 관찰하였다. 소자를 제작하기 위해 두 가지의 나노 입자를 각각 PVK와 함께 톨루엔에 용해시킨 후에 초음파 교반기를 사용하여 나노입자가 PVK가 고르게 섞인 두 가지의 나노복합체를 형성하였다. 두 가지 용액을 p-Si 기판위에 스핀 코팅 방법으로 도포한 후, 열을 가해 용매를 제거하여 CdTe-CdSe 나노 입자가 PVK에 분산되어 있는 나노복합체 박막과 CdTe 나노 입자가 PVK에 분산되어 있는 나노복합체 박막을 각각 형성하였다. 나노 입자가 분산된 각각의 나노복합체 박막 위에 Al을 게이트 전극으로서 열증착하여 소자를 완성하였다. 제작된 두 소자의 정전용량-전압 (C-V) 측정을 하여 CdSe의 유무에 따른 메모리 소자에 대한 C-V 곡선의 다른 평탄 전압 이동을 관찰 하였다. 정전용량-시간 측정을 하여 CdSe 쉘의 유무에 따라 포획된 전하를 유지하는 능력에 차이가 있는 것을 관찰하였다. 측정 결과 모두 CdSe 쉘이 존재하는 메모리 소자에서 우수한 메모리 윈도우와 기억시간 특성이 나타났다. 에너지 대역도를 사용하여 소자의 전하 수송 메커니즘과 CdSe 쉘의 존재에 의해 소자의 메모리 윈도우와 기억시간 특성이 향상되는 원인을 설명 할 것이다.
Abstract Alloying elements such as AI, Ti, Nb and B in the extra low carbon AI-killed steel precipitate as nitrides or carbides and change the recrystallization texture structure of the steel during heattreatment with the result of strong effects on the deep drawability of the steel sheet. In this study the effects of fine precipitates such as nitrides and carbides on the texture of extra low carbon steels into which Ti, Nb, B, P, Si and Mn were added as alloying elements were investigated by means of TEM, SEM and optical microscopic analyses. Fine N$b_2$C and T$i_2$AIN precipitates are mainly observed in the steel containing both Nb and Ti, while fine AIN and coarse BN precipitates are observed in the Nb~containing steel and coarse T${i_4}{N_3}$ and ${N_10}{N_22}$/T$i_68$ precipitates are observed in the Ti-containing steel. The grain size of the Ti containing steel is larger than that of the Nb containing steel and that of the one containing both Nb and Ti.
In this study, we have performed electron probe micro analyzer (EPMA), X-ray differaction (XRD), inductively coupled plasma spectroscopy (ICP), Fourier transform Raman spectroscopy (FT-Raman), far-infrared (FIR), nuclear magnetic resonance (NMR), and pH-DO Analyses for characterizing medicinal mineralogy aspect of the black tourmaline (Shantung, china), black and pink tourmaline (Minas Geraris, Brazil), black touemaline (Daeyu mine, Korea). In addition, heating effects of the tourmaline sauna as well as the effects of tourmaline powder-added soap on skin troubles have been investigated. It has been revealed that chemical composition of the tourmaline is either high in Fe-, Al-, B-rich types. Ratio of the K-Ca, Na-K, and Fe-B reflects the component change property of solid solution. $CaO/CaO+Na_2O$ and MgO/FeO+MgO ratio show high positive correlation. When tourmaline reacts with distilled water, extended reaction time DO values approximately decrease and it stabilizes at DO = 10. Otherwise, pH values increase until 6 hours and it stabilizes at pH = 8 after 24 hours. Distilled water changes to alkaline when it reacts with tourmaline powder and particles. Tourmaline showed lower absorption spectrum strength and transmittance at short wave, where absorption spectrum wavelength and strength were determined by the content of the composition elements and characteristics of crystallography. Increase of the Fe content has been confirmed to be the cause for the reduction of irradiation. For the chemical composition and spectral property of the tourmaline particle samples, it has been found that Si and Fe contents show positive correlation with Far-Infrared irradiation, while Al and Mg contents show negative correlation. For tourmaline powder, it has been confirmed that $^{17}O-NMR$ FWHM (full width at half maximum) decreases when reacts with distilled water. Tourmaline sauna (approximately $100^{\circ}C$) was found to increase $0.5-1.5^{\circ}C$ of body temperature, average of 12 heartbeat, and 10mg Hg of blood pressure. Tourmaline soap had very good aesthetic effect to skin and was confirmed to have above the average improvements to skin troubles (e.g., allergy or atopy).
Proceedings of the Korea Concrete Institute Conference
/
2008.11a
/
pp.721-724
/
2008
The present study was to develop a dry PFB method similar to the existing gypsum board construction method in order to apply the existing wet PFB method that uses fire.resistant adhesive. It was found that the existing wet method can produce concrete compressive strength of 80MPa and fire resistance of 3 hours with 30mm PF boards. The goal of development in this study was fire resistance of 3 hours through dry construction of 15mm fire resistant boards. The results of fire resistance test showed an increase in thermal durability and thermal strain. It is believed that inorganic fiber reduces thermal strain, and lowers heat insulation performance by 15% or less. This suggests that heat insulation performance was improved by the change in the inner composition of PF board resulting from the adjustment of Al:Si mol ratio, high temperature molding, and dry curing. According to the results of fire resistance test, when the dry PF method was applied, the temperature of the main reinforcing bar was 116$^\circ$C in 15mm, 103.8$^\circ$C in 20mm, and 94$^\circ$C in 25mm, and these results satisfied the current standards for fire resistance control presented by the Ministry of Land, Transport and Maritime Affairs. When a 3 hour fire resistance test was performed and the external properties of the specimen were examined, the outermost gypsum board hardly remained and internal PF board maintained its form without thermal strain.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.