• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.4
• /
• pp.76-82
• /
• 2017

The cylinder liner of a diesel engine is commonly made of gray cast iron. However, this cylinder liner can be damaged by the cavitation phenomenon in wet conditions. This cavitation has remained an unsolved problem until now. In this study, the cause of cavitation corrosion due to antifreeze solution was examined using a scanning electron microscope (SEM) and a 3D microscope. The necessary data to prevent the damage caused by cavitation erosion and the corrosion of gray cast iron cylinder liner was obtained. Analysis determined that the gray iron structure consists of an ${\alpha}-matrix$, flake graphite, and steadite. Cavitation erosion was initiated in the coarse flake graphite and propagated into the steadite with pitting. Under repetitive reaction conditions, the ${\alpha}-matrix$ was partially separated from the gray cast iron. This study is expected to be used as the basic data for the prevention of gray cast iron cavitation erosion and corrosion by controlling the graphite and steadite phases.

• Transactions of Materials Processing
• /
• v.14 no.8 s.80
• /
• pp.681-688
• /
• 2005

The high-temperature deformation mechanisms of a ${\alpha}+{\beta}$ titanium alloy (Ti-6Al-4V), near-a titanium alloy (Ti-6.85Al-1.6V) and a single-phase a titanium alloy (Ti-7.0Al-1.5V) were deduced within the framework of inelastic-deformation theory. For this purpose, load relaxation tests were conducted on three alloys at temperatures ranging from 750 to $950^{\circ}C$. The stress-versus-strain rate curves of both alloys were well fitted with inelastic-deformation equations based on grain matrix deformation and grain-boundary sliding. The constitutive analysis revealed that the grain-boundary sliding resistance is higher in the near-${\alpha}$ alloy than in the two-phase ${\alpha}+{\beta}$ alloy due to the difficulties in relaxing stress concentrations at the triple-junction region in the near-${\alpha}$ alloy. In addition, the internal-strength parameter (${\sigma}^*$) of the near-${\alpha}$ alloy was much higher than that of the ${\alpha}+{\beta}$ alloy, thus implying that dislocation emission/ slip transfer at ${\alpha}/{\alpha}$ boundaries is more difficult than at ${\alpha}/{\beta}$ boundaries.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.5
• /
• pp.675-682
• /
• 2014

Approximately 50% of people in the world experience abdominal flatulence after the intake of foods containing galactosides such as lactose or soybean oligosaccharides. The galactoside hydrolyzing enzymes of ${\alpha}$- and ${\beta}$-galactosidases have been shown to reduce the levels of galactosides in both the food matrix and the human gastrointestinal tract. This study aimed to optimize the production of ${\alpha}$- and ${\beta}$-galactosidases of Bifidobacterium longum subsp. longum RD47 with a basal medium containing whey and corn steep liquor. The activities of both enzymes were determined after culturing at $37^{\circ}C$ at pH 6.0 for 30 h. The optimal production of ${\alpha}$- and ${\beta}$-galactosidases was obtained with soybean oligosaccharides as a carbon source and proteose peptone no. 3 as a nitrogen source. The optimum pH for both ${\alpha}$- and ${\beta}$-galactosidases was 6.0. The optimum temperatures were $35^{\circ}C$ for ${\alpha}$-galactosidase and $37^{\circ}C$ for ${\beta}$-galactosidase. They showed temperature stability up to $37^{\circ}C$. At a 1 mM concentration of metal ions, $CuSO_4$ inhibited the activities of ${\alpha}$- and ${\beta}$-galactosidases by 35% and 50%, respectively. On the basis of the results obtained in this study, B. longum RD47 may be used for the production of ${\alpha}$- and ${\beta}$-galactosidases, which may reduce the levels of flatulence factors.

• Molecular & Cellular Toxicology
• /
• v.4 no.3
• /
• pp.253-259
• /
• 2008

Human follicular fluid (HFF) is the in vivo microenvironment for oocyte maturation and includes a variety of proteins that could be involved in oocyte development and fertilization. We therefore used a proteomic approach to identify new HFF proteins. HFF from mature human follicles was obtained from five women following oocyte collection for in vitro fertilization (IVF). Ethanol-precipitated HFF run on two-dimensional gel electrophoresis (2DE) produced approximately 250 Coomassie brilliant blue-stained spots, 64 of which were identified using matrix-assisted laser desorption/ionization-mass spectrometry (MALDIMS). In this study, several proteins including complement factor H, inter-${\alpha}$ (globulin) inhibitor H4, inter-${\alpha}$-trypsin inhibitor heavy chain H4 precursor, human zinc-${\alpha}$-2-glycoprotein chain B, PRO2619, PRO02044, and complex-forming glycoprotein HC were new proteins that have not been previously reported in HFF using proteomic methods. Additionally, we identified alloalbumin venezia for the first time from trichloroacetic acid (TCA)-precipitated HFF. These HFF proteins could serve as new biomarkers for important human reproductive processes.

• Structural Engineering and Mechanics
• /
• v.51 no.1
• /
• pp.89-110
• /
• 2014

In this study, two beam-column elements based on the Elasto-Fiber element theory for reinforced concrete (RC) element have been developed and compared with each other. The first element is based on Elasto Fiber Approach (EFA) was initially developed for steel structures and this theory was applied for RC element in there and the second element is called as Fiber & Bernoulli-Euler element approach (FBEA). In this element, Cubic Hermitian polynomials are used for obtaining stiffness matrix. The beams or columns element in both approaches are divided into a sub-element called the segment for obtaining element stiffness matrix. The internal freedoms of this segment are dynamically condensed to the external freedoms at the ends of the element by using a dynamic substructure technique. Thus, nonlinear dynamic analysis of high RC building can be obtained within short times. In addition to, external loads of the segment are assumed to be distributed along to element. Therefore, damages can be taken account of along to element and redistributions of the loading for solutions. Bossak-${\alpha}$ integration with predicted-corrected method is used for the nonlinear seismic analysis of RC frames. For numerical application, seismic damage analyses for a 4-story frame and an 8-story RC frame with soft-story are obtained to comparisons of RC element according to both approaches. Damages evaluation and propagation in the frame elements are studied and response quantities from obtained both approaches are investigated in the detail.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.27 no.2
• /
• pp.183-188
• /
• 2013

Ultraviolet (UV) B irradiation induces the production of matrix metalloproteinases (MMPs), which are responsible for the degradation or synthesis inhibition of collagenous extracellular matrix in connective tissues, causing skin photoaging. In this study, we examined the inhibitory effect of MMP-1 expression of yam extract in tumor necrosis factor-alpha (TNF-${\alpha}$)-stimulated human dermal fibroblast neonatal (HDFn) cell and preventive effect of UVB-induced damage in hairless mice skin. The synthesis of procollagen and the release of MMP-1 in HDFn cells were measured by EIA kit and MMP-1 assay kit, respectively. UVB radiation was applied to the backs of the mice three times a week for 8 weeks. Mice were randomly divided into three groups, and were topical application with the Dioscorea batatas (DB, 6%) or vehicle. Reduction of TNF-${\alpha}$-induced procollagen synthesis was increased by DB (50 ug/ml), which was higher than positive control group (TGF-${\beta}$). Also, pre-treatment of HDFn cells with DB inhibited TNF-${\alpha}$-induced release of MMP-1. In vivo study, we found that preventive effect of DB against UV-induced epidermal thickness. DB suppressed the expression of MMP-3 and MMP-13 induced by UVB irradiation. Our results show that DB have preventive effect of UV-induced skin damage in hairless mice.

• The Korea Journal of Herbology
• /
• v.23 no.4
• /
• pp.113-120
• /
• 2008

Objectives: This study was evaluated to elucidate the inhibitory potential of Imyosan(IMS) and its components, Phellodendri Cortex(PC: Phellodendron amurense Rupr., Hwangbaek in Korean) and Atractylodis Rhizoma(AR: Atratylodes lancea D.C., Changchool in Korean), on human aortic smooth muscle cells(HASMC) migration and production of matrix metalloproteinase (MMP)-2 and MMP-9 by TNF-${\alpha}$ treatment. Methods: Cytotoxic activity of IMS and its components on HASMC was using 5-(3-caroboxy meth-oxyphenyl)-2H-tetra-zolium inner salt(MTS) assay. Effect of IMS, PC and AR on TNF-${\alpha}$-induced HASMC migration underside of matrigel filter was stained with hematoxylin-eosin. And total number of cells that migrated to the underside of the filter was counted. MMP-2 and MMP-9 activity was evaluated by gelatin zymography assay. Results: The matrigel migration assay showed that IMS effectively inhibited the TNF-${\alpha}$-induced migration of HASMC. Moreover, IMS significantly inhibited MMP-9 activity. Our present study demonstrates that IMS and its components inhibit TNF-${\alpha}$-induced HASMC migration and MMP-9 activity. The inhibitory effect of IMS extract is more potent than that of its component herb extracts. Conclusions: These results provide evidence that IMS has multiple effects in the inhibition of HASMC migration and may offer a therapeutic approach to block HASMC migration.

• Metals and materials international
• /
• v.24 no.6
• /
• pp.1315-1326
• /
• 2018

In this work, ultrasonic vibration (UV) and rheo-squeeze casting was first applied on the Mg alloy reinforced with long period stacking ordered (LPSO) structure. The semisolid slurry of Mg-Zn-Y alloy was prepared by UV and processed by rheosqueeze casting in succession. The effects of UV, Zr addition and squeeze pressure on microstructure of semisolid Mg-Zn-Y alloy were studied. The results revealed that the synergic effect of UV and Zr addition generated a finer microstructure than either one alone when preparing the slurries. Rheo-squeeze casting could significantly refine the LPSO structure and ${\alpha}-Mg$ matrix in $Mg_{96.9}Zn_1Y_2Zr_{0.1}$ alloy without changing the phase compositions or the type of LPSO structure. When the squeeze pressure increased from 0 to 400 MPa, the block LPSO structure was completely eliminated and the average thickness of LPSO structure decreased from 9.8 to $4.3{\mu}m$. Under 400 MPa squeeze pressure, the tensile strength and elongation of the rheocast $Mg_{96.9}Zn_1Y_2Zr_{0.1}$ alloy reached the maximum values, which were 234 MPa and 17.6%, respectively, due to its fine ${\alpha}-Mg$ matrix (${\alpha}1-Mg$ and ${\alpha}2-Mg$ grains) and LPSO structure.

• Korean Journal of Materials Research
• /
• v.24 no.9
• /
• pp.481-487
• /
• 2014

The effect of alpha phase on the fatigue properties of Fe-29%Ni-17%Co low thermal expansion alloy was investigated. Two kinds of alloys (Base alloy and Alpha alloy) were prepared by controlling the minimal alloy composition. Microstructure observation, tensile, high-cycle fatigue, and low-cycle fatigue results were measured in this study. The Base alloy microstructure showed typical austenite ${\gamma}$ phase. Alpha alloy represented the dispersed phase in the austenite ${\gamma}$ matrix. As a result of tensile testing, Alpha alloy was found to have higher strengths (Y.S. & T.S.) and lower elongation compared to those of the Base alloy. High cycle fatigue results showed that Alpha alloy had a higher fatigue limit (360MPa) than that (330MPa) of the Base alloy. The Alpha alloy exhibited the superior high cycle fatigue property in all of the fatigue stress conditions. SEM fractography results showed that the alpha phase could act to effectively retard both fatigue crack initiation and crack propagation. In the case of low-cycle fatigue, the Base alloy had longer fatigue life in the high plastic strain amplitude region and the Alpha alloy showed better fatigue property only in the low plastic strain amplitude region. The fatigue deformation behavior of the Fe-29%Ni-17%Co alloy was also discussed as related with its microstructure.

• Molecules and Cells
• /
• v.38 no.7
• /
• pp.604-609
• /
• 2015

The active metabolite of vitamin D such as $1{\alpha}$,25-dihydroxyvitamin ($D_3(1{\alpha},25(OH)_2D_3)$ is a well-known key regulatory factor in bone metabolism. However, little is known about the potential of vitamin D as an odontogenic inducer in human dental pulp cells (HDPCs) in vitro. The purpose of this study was to evaluate the effect of vitamin $D_3$ metabolite, $1{\alpha},25(OH)_2D_3$, on odontoblastic differentiation in HDPCs. HDPCs extracted from maxillary supernumerary incisors and third molars were directly cultured with $1{\alpha},25(OH)_2D_3$ in the absence of differentiation-inducing factors. Treatment of HDPCs with $1{\alpha},25(OH)_2D_3$ at a concentration of 10 nM or 100 nM significantly upregulated the expression of dentin sialophosphoprotein (DSPP) and dentin matrix protein1 (DMP1), the odontogenesis-related genes. Also, $1{\alpha},25(OH)_2D_3$ enhanced the alkaline phosphatase (ALP) activity and mineralization in HDPCs. In addition, $1{\alpha},25(OH)_2D_3$ induced activation of extracellular signal-regulated kinases (ERKs), whereas the ERK inhibitor U0126 ameliorated the upregulation of DSPP and DMP1 and reduced the mineralization enhanced by $1{\alpha},25(OH)_2D_3$. These results demonstrated that $1{\alpha},25(OH)_2D_3$ promoted odontoblastic differentiation of HDPCs via modulating ERK activation.