• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.111-112
• /
• 2009

Diamond-like carbon (DLC) is a convenient term to indicate the compositions of the various forms of amorphous carbon (a-C), tetrahedral amorphous carbon (ta-C), hydrogenated amorphous carbon and tetrahedral amorphous carbon (a-C:H and ta-C:H). The a-C film with disordered graphitic ordering, such as soot, chars, glassy carbon, and evaporated a-C, is shown in the lower left hand corner. If the fraction of sp3 bonding reaches a high degree, such an a-C is denoted as tetrahedral amorphous carbon (ta-C), in order to distinguish it from sp2 a-C [2]. Two hydrocarbon polymers, that is, polyethylene (CH2)n and polyacetylene (CH)n, define the limits of the triangle in the right hand corner beyond which interconnecting C-C networks do not form, and only strait-chain molecules are formed. The DLC films, i.e. a-C, ta-C, a-C:H and ta-C:H, have some extreme properties similar to diamond, such as hardness, elastic modulus and chemical inertness. These films are great advantages for many applications. One of the most important applications of the carbon-based films is the coating for magnetic hard disk recording. The second successful application is wear protective and antireflective films for IR windows. The third application is wear protection of bearings and sliding friction parts. The fourth is precision gages for the automotive industry. Recently, exciting ongoing study [1] tries to deposit a carbon-based protective film on engine parts (e.g. engine cylinders and pistons) taking into account not only low friction and wear, but also self lubricating properties. Reduction of the oil consumption is expected. Currently, for an additional application field, the carbon-based films are extensively studied as excellent candidates for biocompatible films on biomedical implants. The carbon-based films consist of carbon, hydrogen and nitrogen, which are biologically harmless as well as the main elements of human body. Some in vitro and limited in vivo studies on the biological effects of carbon-based films have been studied [$2{\sim}5$].The carbon-based films have great potentials in many fields. However, a few technological issues for carbon-based film are still needed to be studied to improve the applicability. Aisenberg and Chabot [3] firstly prepared an amorphous carbon film on substrates remained at room temperature using a beam of carbon ions produced using argon plasma. Spencer et al. [4] had subsequently developed this field. Many deposition techniques for DLC films have been developed to increase the fraction of sp3 bonding in the films. The a-C films have been prepared by a variety of deposition methods such as ion plating, DC or RF sputtering, RF or DC plasma enhanced chemical vapor deposition (PECVD), electron cyclotron resonance chemical vapor deposition (ECR-CVD), ion implantation, ablation, pulsed laser deposition and cathodic arc deposition, from a variety of carbon target or gaseous sources materials [5]. Sputtering is the most common deposition method for a-C film. Deposited films by these plasma methods, such as plasma enhanced chemical vapor deposition (PECVD) [6], are ranged into the interior of the triangle. Application fields of DLC films investigated from papers. Many papers purposed to apply for tribology due to the carbon-based films of low friction and wear resistance. Figure 1 shows the percentage of DLC research interest for application field. The biggest portion is tribology field. It is occupied 57%. Second, biomedical field hold 14%. Nowadays, biomedical field is took notice in many countries and significantly increased the research papers. DLC films actually applied to many industries in 2005 as shown figure 2. The most applied fields are mold and machinery industries. It took over 50%. The automobile industry is more and more increase application parts. In the near future, automobile industry is expected a big market for DLC coating. Figure 1 Research interests of carbon-based filmsFigure 2 Demand ratio of DLC coating for industry in 2005. In this presentation, I will introduce a trend of carbon-based coating research and applications.

• Clinical and Experimental Pediatrics
• /
• v.45 no.12
• /
• pp.1503-1511
• /
• 2002

Purpose : Although the short- and long-term outcomes of low birth weight(LBW) neonatal intensive care unit(NICU) survivors have been extensively studied, much less information is available for normal birth weight(NBW) infants(greater than 2,500 gm) who require NICU care. Methods : We retrospectively examined the neonatal hospitalizations and one year health status of 302 NBW and 131 LBW admissions to our NICU. Information on the neonatal hospitalization was obtained from a review of medical records. Postdischarge health status was collected by using telephone surveys and medical records. Results : After initial discharge, 21.2% of the NBW infants and 23% of the LBW infants required rehospitalization during the first year of life and there was no significant difference between the two groups. The reasons for rehospitalization of the NBW infants included respiratory disorders (32.1%), G-I problems(26.2%), genitourinary problems(11.9%), surgery(10.7%), cardiac problems(7.1%), and congenital/developmental problems(1.2%). For the LBW infants, the order of frequency was the same, with the percentages slightly different. Neonatal risk factors related to the rehospitalization of the NBW infants included mechanical ventilation, duration of mechanical ventilation, and congenital anomaly. But no positive significant correlation of neonatal risk factors with rehospitalization of LBW infants was found. Conclusion : Low and normal birthweight NICU survivors were rehospitalized at similar rates. The most common cause of rehospitalization was respiratory problems. Neonatal risk factors related to rehospitalization of NBW infants were mechanical ventilation, duration of mechanical ventilation, and congenital anomaly. However, no positive significant correlation of neonatal risk factors with rehospitalization of LBW infants was found. The data suggests that NBW infant survivors, as well as LBW infant NICU survivors, require close follow up.

• Clinical and Experimental Pediatrics
• /
• v.45 no.11
• /
• pp.1411-1416
• /
• 2002

Purpose : Although the use of intravenous gamma-globulin(IVGG) in Kawasaki disease(KD) is effective in reducing clinical symptoms and coronary artery complications, 20-30% of patients have persistent or recrudescent fever and ongoing clinical symptoms. In these patients, the additional infusion of IVGG is considered. The authors studied the characteristics of patients who received IVGG retreatment, and compared them with the patients who did not need IVGG retreatment, for determination of IVGG retreatment. Methods : We reviewed the medical records of 117 KD patients who could be followed up at least six months. We studied the conventional laboratory findings, electrocardiogram(EKG), signal averaged ECG(SAECG) and echocardiogram. Results : Twenty three patients had early cardiac complications during the six months of follow-up. Four patients had late cardiac complications after six months. The early cardiac complication rate was higher in the IVGG retreatment group than the single infusion group(P<0.0001). The late complication rate was also higher in the retreatment group(P<0.0001). The patients who received methyl-prednisolone(m-PD) pulse therapy had much higher rates of early and late cardiac complications than those who received a single IVGG infusion. Among the clinical data and laboratory findings, only CRP increased significantly in patients who have had the cardiac complications. The IVGG retreatment group had increased CRP than the single infusion group. Conclusion : The patients with increased initial CRP may have an increased incidence of complications and an increased possibility of IVGG retreatment. We thought that retreated KD patients might have inflammations severe enough to need high dose IVGG as shown by high CRP levels, and IVGG retreatment could not prevent coronary artery lesions sufficiently.

• Clinical and Experimental Pediatrics
• /
• v.45 no.12
• /
• pp.1528-1533
• /
• 2002

Purpose : Isolated noncompaction of the ventricular myocardium(INVM) is one of the unclassified cardiomyopathies that is characterized by numerous, excessively prominent trabeculations, and deep intertrabecular recesses. We performed this study to evaluate the clinical features of INVM in children. Methods : The medical records of 10 patients with INVM were reviewed. We analyzed the clinical manifestations, hemodynamics, pattern of inheritance, and long-term prognosis of INVM in children. Results : Age at diagnosis was $45{\pm}53months$(1 day-14 years) with follow-up lasting as long as 78 months. Most INVM was asymptomatic on diagnosis. Associated cardiac anomalies were noted in six patients(ventricualr or atrial septal defect, patent ductus arteriosus with mitral valve prolapse, or mitral valve cleft). Depressed or flat changes of T wave in lead II, III and aVF were observed on electrocardiography. Various arrhythmia including WPW syndrome with paroxysmal supraventricular tachycardia, third-degree atrioventricular block, and familial sick sinus node dysfuction were observed. The degree of trabeculation in INVM was significantly prominent from level of mitral valve to apex compared to age-matched control. Familial recurrences were noted in two patients. The systolic function of the left ventricle was decreased in 20% of patients during the follow-up period, but systemic embolism or ventricular tachycardia was not observed. Conclusion : INVM is not a rare disorder. The cardiac function may be deteriorated in children as well as adults during long-term follow up. Thus early diagnosis and long-term follow-up must be done. So, the nation-wide multicenter clinical study would be mandatory to evaluate the incidence, long-term prognosis, and establishment of objective diagnostic criteria of INVM.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.9
• /
• pp.1350-1356
• /
• 2005

Osteoporosis that is associated with estrogen deficiency in menopause is by far the most common cause of age-related bone loss. Since isoflavone had been reported as a natural substance that minimizes bone loss, we have begun this study to examine the effect of the substance on bone metabolism in ovariectomized rats. Five week-old (n=22) and 25 week-old (n=22) Sprage-Dawley female rats were classified into young (Y) and adult (A) groups. Each group consisted of three subgroups : sham operated group (SH), ovariectomized group (OVX), and isoflavone supplemented group (OVX+ISO 80 mg/kg B.W.). They were fed chow for 9 weeks. The result showed that body weight gain was increased in YOVX in comparison to YSH group, (p<0.05) serum osteocalcin concentration and urinal deoxypyridinoline (DPD) excretion had significantly increased in YOVX more than in YSH group, and significantly decrease in OVX+ISO than in YOVX group (p<0.05). We concluded that soy isoflavones may decrease bone turnover in young rats. However, isoflavone supplement didn't show significant influence on bone metabolism of adult rats.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• Journal of the Korean association of regional geographers
• /
• v.6 no.3
• /
• pp.53-81
• /
• 2000

The purpose of this study is to examine the chracteristics of the location of Zen Buddhist temples which are the Nine-Mountain Sects of Zen(九山禪門) from feng-shui perspective. A large number of temples have been built for about 1600 years since Buddhism had influenced on Korea. They have been built nationwide in different times by different sects of Buddhism. The pattern of location of Buddhist temples is different according to background of the times (political, economic, cultural aspect) and of tenet(difference in sects of Buddhism) when the temples were built. But the general location of Korean Buddhist temples is in accordance with feng-shui theory. Feng-shui is a traditional geographic thought in China and Korea. It is necessary to understand feng-shui in order to understand Korean landscape and cultural geography. It had given a tremendous impact on Korean landscape through choosing site of cities, settlements, houses, mounments, temples, pagodas, and so on. Before feng-shui was prevailing in Korea, Buddhist temples were mostly built on sacred place which was connected with folk beliefs. In the case of the late Silla Dynasty when Zen Buddhism was prevailing, feng-shui became popular and many. temples were built in accordance with feng-shui. The typical examples are found in the site of Nine-Mountain Sects of Zen temples. The interpretation of geomantic site of Nine-Mountain Sects of Zen temples will show us how feng-shui was applied to and reflected in the Korean peninsula. In Zen Buddhism, feng-shui was applied to the choice of the temple site. Also feng-shui theory was usually used to choose the site of stupa(Budo) where the remains of the founder of sect. In this study, I will interpret the geomantic characteristics of Nine-Mountain Sects of Zen temples. The geomantic interpretations of the temples are as follow. 1. The temples are located at the foot of a hill with surrounding mountains and a watercourse in front. Feng-shui texts often describe it as an ideal site. This geomantic situation is well equipped with natural drainage; protection from cold wind from the north or evil spirits; a good view with open space to the front; protection from unnecessary weather damage; and security and protection from strangers and invaders. 2. The sitting and facing direction of the temples correspond to the oncoming dragon's direction. 3. Many feng-shui texts discuss the types of Sa(surrounding mountains) in detail and morphologically describe them with certain animate and inanimate auspicious objects. In case of Nine-Mountain Sects of Zen temples, the geomantic landscape of these can be compared to auspicious objects. This is morphological marker for the description of configulation features of these temples. 4. Most auspicious places are not perfect, but the shortcomings can be overcome by many means. We can observe modification of landscape for the purpose of fulfilling the geomantic harmony of the temple.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.3
• /
• pp.39-55
• /
• 1992

In this research, a Three Level Decomposition technique has been developed for configuration design optimization of truss structures. In the first level, as design variables, behavior variables are used and the strain energy has been treated as the cost function to be maximized so that the truss structure can absorb maximum energy. For design constraint of the optimal design problem, allowable stress, buckling stress, and displacement under multi-loading conditions are considered. In the second level, design problem is formulated using the cross-sectional area as the design variable and the weight of the truss structure as the cost function. As for the design constraint, the equilibrium equation with the optimal displacement obtained in the first level is used. In the third level, the nodal point coordinates of the truss structure are used as coordinating variable and the weight has been taken as the cost function. An advantage of the Three Level Decomposition technique is that the first and second level design problems are simple because they are linear programming problems. Moreover, the method is efficient because it is not necessary to carry out time consuming structural analysis and techniques for sensitivity analysis during the design optimization process. By treating the nodal point coordinates as design variables, the third level becomes unconstrained optimal design problems which is easier to solve. Moreover, by using different convergence criteria at each level of design problem, improved convergence can be obtained. The proposed technique has been tested using four different truss structures to yield almost identical optimum designs in the literature with efficient convergence rate regardless of constraint types and configuration of truss structures.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.4
• /
• pp.527-536
• /
• 1996

The patterns of diel horizontal migration (DHM) of 7 copepod species are compared as part of a general investigation of the zooplankton adaptations to the surf zone habitats. In a sandy shore surf zone of Yongil Bay, 3 sites such as the bottom and surface of 1 m water depth and water's edge are sampled with a sledge net(n=108). The surf zone copepod assemblage is dominated by 7 species; Acartia hudsonica, Fseudodiaptomus marinus, Paracalanus indicus, Calanus sinicus, Oithona similis, Sinocalanus tenellus and Labidocera bipinnata. Threefold variations in copepod abundance are observed within a diel cycle. Abundances of 7 dominant species and total copepods captured in the surface exhibit significant diel differences, but those taken in the bottom are not significantly affected by diel period. It is shown that about $90\%$ of the surf zone copepods performed DHM. The nocturnal high densities of copepods occurred for a neap tide when the offshore winds prevailed, suggesting the animals' ability for horizontal orientation and an active locomotion without invoking passive transportation by currents. Photoreactive behavior of copepods triggered by relative changes in light intensity may be a primary factor inducing DHM by aggregating in the surf zone during the night and spreading out at day; then copepods may reduce encounters with visual predators. In A. hudsonica, ontogenetic variations in timings of DHM are evident. Such variations are likely to minimize intraspecific competition for diets. Data on shoreward migration of copepods indicate that A. hudsonica, P. indicus, O. similis and S. tenellus can maintain swimming velocities of about $20m\;h^{-1}$ for durations of more than an hour. Our observations of strong diel difference in abundances point out the need for both day and night samplings in surf zone habitats, if the importance of these habitats to planktonic copepods are to be fully understood.

• Journal of the Korean Geographical Society
• /
• v.31 no.3
• /
• pp.469-488
• /
• 1996

The defining of weather forecasting regions is possible. since the representativeness of regional weather can by reasonably clarified in terms of weather entropy and the use of information ratio. In this paper, the weather entropy and information ratio were derived numerially from using the information theory. The typical weather characteristics were clarified and defined in the homogeneous weather forecasting regions of the southern parts of Korea. The data used for this study are the daily precipitation and cloudiness during the recent five years (1990-1994) at 42 stations in southern parts of Korea. It is divided into four classes of fine, clear, cloudy and rainy. The results are summarized as follows: 1. The maximum value of weather entropy in study area is 2.009 vits in Yosu in July, and the minimum one is 1.624 bits in Kohung in October. The mean value of weather entropy is maximal in July, on the other hand, minimal in October during four season. The less the value of entropy is, the stabler the weather is. While the bigger the value of entropy is, the more changeable the weather is. 2. The deviation from mean value of weather entropy in southern parts of Korea, with the positive and the negative parts, shows remarkably the distributional tendency of the east (positive) and the west (negative) in January but of the south (positive) and the north (negative) in July. It also clearly shows the distributional tendency of the east (postive) and the west(negative) in the coastal region in April, and of X-type (southern west and northern east: negative) in Chiri Mt. in October. 3. In southern parts, the average information ratio maximaly appear 0.618 in Taegu area in July, whereas minimally 0.550 in Kwangju in October. Particularly the average information ratio of Pusan area is the greatest in April, but the smallest in October. And in Taegu, Kwangju, and Kunsan, it is the greatest in April, January, and July, but the smallest in Jyly, July, and pril. 4.The narrowest appreance of weather representativeness is in July when the Kwangju is the center of the weather forecasting. But the broadest one is in April when Taegu is the center of weather forecasting. 5. The defining of weather forecasting regions in terms of the difference of information ratio most broadly shows up in July in Pusan including the whole Honam area and the southern parts of Youngnam when the Pusan-Taegu is the basis of the application of information ratio. Meanwhile, it appears most broadly in January in Taegu including the whole southern parts except southern coastal area.