• Economic and Environmental Geology
• /
• v.21 no.1
• /
• pp.17-27
• /
• 1988

The Cretaceous Jinsan gold-bearing hydrothermal veins occur within the Late Proterozoic to Mid Ordovician metasedimentary rocks, intruded by Early Cretaceous pink-feldspar granite($142{\pm}2.0m.y.$). Electrum-galena-sphalerite mineralization was deposited in three stages of quartz and calcite veins. Quartz sulfide-bearing stage I and II evolved from initial high temperatures (near $360^{\circ}C$)to later lower temperatures(near $220^{\circ}C$)from lower salinity fluids(1.0 to 3.2 wt.% NaCl eq.). Fluid inclusion data from the post ore carbonate stage reflects much cooler($110^{\circ}$ to $180^{\circ}C$). Evidence of boiling indicates pressure of<85 bars, corresponding to depths of 400m to 1050m assuming lithostatic and hydrostatic loads. Au-deposition was likely a result of boiling, coupled with declining temperatures. The ${\delta}^{34}S$ $H_2S$ values calculated for sulfides are consistent with an igneous source of sulfur with a ${\delta}^{34}S_{{\Sigma}S}$ value near 4.0‰.

• Journal of Power System Engineering
• /
• v.13 no.5
• /
• pp.18-24
• /
• 2009

This paper shows the result of development about the revolution system of azimuth thruster which of power is less than 250kW for small ship. Advanced Azimuth revolution system can revolve propeller and rudder from 360 degree so that this system for vessel maneuvering can be excellent of propulsion effectively. Fluid power control system for azimuth thruster is designed with PID control system by using CEMTool/SIMTool program. And the actuator used for servo valve can control rudder angle, pressure and direction. The first, We had a test for the angle control of revolution system. The result of angle control confirmed that it has the good efficiency from experiment result of time input degree $30^{\circ}$, $90^{\circ}$ and $180^{\circ}$. The second, We had to a test for the pressure characteristic of hydraulic motor. As a result, We confirmed the maximum pressure 3.5MPa and steady state 0.7MPa nom experiment result of time input degree $30^{\circ}$. In this paper, it is identified the pressure characteristic of hydraulic motor and angle control for azimuth thruster by AMESim, and it has been confirmed the usefulness of AMEsim modeling was verified by comparison between AMESim simulation results and experiments results.

• Microbiology and Biotechnology Letters
• /
• v.18 no.4
• /
• pp.360-367
• /
• 1990

The several glycoside hydrolysing enzymes related to rutin degradation are found to be rhamnosidase, glucosidase and rutinosidase. Rutinosidase was purified to electrophoretic homogeneity from cell extracts of rutin-degrading strain, MT-57, which was identified as a Arthrobacter sp. Its molecular weight was estimated to be 42, 000 by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and 40, 000 by gel filtration. The optimum pH for enzyme was found to be 7.5, and relatively stable in alkaline solution. The optimum temperature for enzyme was $45^{\circ}C$, being stable up to $50^{\circ}C$ for 20 min. The Bm value of enzyme for rutin was 0.5 $\mu \textrm m$. The enzyme activity was increased by the chelating agent such as EDTA, $NaN_3$, and 8-hydroxyquinoline, was strongly inhibited by $CO_{2+}, Ni^{2+}$, and $Cu^{2+}$. The enzyme had high substrate specificity in the rutinoside.

• Korean Journal of Food Science and Technology
• /
• v.15 no.3
• /
• pp.220-224
• /
• 1983

The hydration of water, at $20^{\circ}\;30^{\circ}$ and $40^{\circ}C$ for 10-360 minutes, by the two varieties of husked barley and of naked barley which were polished to 40 and 30%, respectively, was investigated. The absorption was directly proportional to the square root of the hydration time and accounted for by the diffusion equation: 1-M = $(2/{\sqrt\pi})\;(S/V){\sqrt{Dt}}$, where 1-M is the relative moisture gain and S/V is the surface-to-volume ratio. The average diffusion coefficient (D) was given by the Arrhenius relation: D = $D_{0}\;exp\;(-Ea/RT)$, where the activation energy for both husked and naked barley was about 7.2 Kcal/mole. The average value of D for naked barley was slightly higher than that for husked barley.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.4
• /
• pp.1-10
• /
• 2011

This paper presents the shape optimization of the endwall which improve the aerothermal environment of a gas turbine passage. A nonaxisymmetric endwall technique was adapted as the improving method. The turbine passage was simulated by a $90^{\circ}$ turning duct ($Re_D$=360,000). The main purpose of the present investigation was to focus on finding a nonaxisymmetric endwall with minimum total pressure loss in the passage and heat transfer coefficient on the endwall of the duct. An approximate optimization method was used for the investigation to secure the computational efficiency. Results indicated that a significant improvement in aerothermal environment can be achieved through the application of a nonaxisymmetric endwall.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.32.2-32.2
• /
• 2009

높은 효율성을 가지는 전계방출 디스플레이(field emission displays)를 개발하기 위해 탄소나노튜브 음극소자 (CNT cathodes)의 표면처리에 대한 연구가 활발히 진행되고 있다. 열처리가 끝난 탄소나노튜브 음극소자(CNT cathodes)의 표면에는 유기성 바인더들이 타면서 잔여물들이 생성되게 되는데 이러한 잔여물들은 전계방출을 하는데 있어서 방해요소가 된다. 전계방출이 용이하게 하기 위해서는 이러한 잔여물들을 효과적으로 제거해 주어야한다. 표면처리의 방법으로는 여러 가지가 존재하는데 그중에서 테이핑 방법을 이용한 표면처리는 열처리 후에 남은 잔여물들을 제거하면서 CNTs를 돌출시키는 효율적인 방법이다. 하지만 이러한 테이핑 방법으로도 완벽하게 잔여물을 제거하기란 쉽지 않다. 본 연구는 첫 번째 열처리가 끝난 시편을 테이핑 방법을 이용하여 표면 처리를 실시하고 그것으로 끝나는 것이 아니라 표면처리가 끝난 시편에 두 번째 열처리를 실시하여 탄소나노튜브 음극소자(CNT cathodes)에 남아있는 잔여물들을 좀 더 효과적으로 제거해 주는데 그 목적이 있다. 재열처리시 온도는 $330^{\circ}C$ ~ $420^{\circ}C$까지 $30^{\circ}C$의 차이를 주어 4단계에 걸쳐 실험을 실시하였고 재열저리를 하기전과 재열처리를 실행한 후의 전류밀도의 차이를 관찰하여 효과적으로 잔여물들이 제거되었는지에 대해서 알아보았다. 재열처리를 실행하였을 때 재열처리를 하기 전에 비하여 전류밀도에서 우월하였으며 $360^{\circ}C$ 부근에서 가장 많은 차이를 보였다.

• Journal of the Korea Institute of Building Construction
• /
• v.3 no.2
• /
• pp.141-148
• /
• 2003

This study deals with the estimation of material properties according to the construction condition for water-soluble rubberized asphalt waterproofing material of spray type. In this study, the waterproofing material property by the spray construction method is suggested by means of estimation its tensile performance and temperature dependency according to mix proportion ratio(4:1, 8:1), referenced viscosity and solid content (A:360cps, 76%, B:580cps, 79%, C:490cps, 70%), spray angle($30^{\circ}$, $45^{\circ}$, $60^{\circ}$), and spray distance(30cm, 50cm, 70cm). The result of testing are as follows. (1) The mix proportion ratio of principal agent and hardener is 4:1. (2) The viscosity referenced and solid content are 490cps and 70%. (3) The spray angle referenced is $45.^{\circ}$ (4) The distance referenced from concrete surface to spray gun is 40~50cm.

• Korean Journal of Materials Research
• /
• v.29 no.7
• /
• pp.432-436
• /
• 2019

Zinc oxide(ZnO) micro/nanocrystals are grown via thermal evaporation of ZnO powder mixed with Mn powder, which is used as a reducing agent. The ZnO/Mn powder mixture produces ZnO micro/nanocrystals with diverse morphologies such as rods, wires, belts, and spherical shapes. Rod-shaped ZnO micro/nanocrystals, which have an average diameter of 360 nm and an average length of about $12{\mu}m$, are fabricated at a temperature as low as $800^{\circ}C$ due to the reducibility of Mn. Wire-and belt-like ZnO micro/nanocrystals with length of $3{\mu}m$ are formed at $900^{\circ}C$ and $1,000^{\circ}C$. When the growth temperature is $1,100^{\circ}C$, spherical shaped ZnO crystals having a diameter of 150 nm are synthesized. X-ray diffraction patterns reveal that ZnO had hexagonal wurtzite crystal structure. A strong ultraviolet emission peak and a weak visible emission band are observed in the cathodoluminescence spectra of the rod- and wire-shaped ZnO crystals, while visible emission is detected for the spherical shaped ZnO crystals.

• Progress in Medical Physics
• /
• v.27 no.2
• /
• pp.79-85
• /
• 2016

The objective of this study is to increase the accuracy of dose transmission in radiation therapy using two types of treatment tables, standard exact couch (Varian 21EX, Varian Medical Systems, Milpitas, CA) and 6D robotic couch (Novalis, BrainLAB A.G., Heimstetten, Germany)). We examined the dose attenuation based on the two types of treatment tables and studied the dose of attenuation using the phase (In/Out) for the standard exact couch. We measured the relative dose according to the incident angle of a penetrative photon beam under a treatment table. The incident angle of the photon beam was from $0^{\circ}$ to $360^{\circ}$ in the increments of $5^{\circ}$. The reference angle was set to $0^{\circ}$. Furthermore, the relative dose of the 6D robotic couch was measured using 6 MV and 15 MV, and that of the standard exact couch was measured at the sliding rail position (In-Out) using 6 MV and 10 MV. In the case of the standard exact couch, the measured relative dose was 16.53% (rails at the "In position," $175^{\circ}$, 6 MV), 12.42% (rails at the "In position," $175^{\circ}$, 10 MV), 13.13% (rails at the "Out position," $175^{\circ}$, 6 MV), and 9.96% (rails at the "Out position," $175^{\circ}$, 10 MV). In the case of the 6D robotic couch, the measured relative dose was 6.82% ($130^{\circ}$, 6 MV) and 4.92% ($130^{\circ}$, 15 MV). The photon energies were surveyed at the same incident angle. The dose attenuation for an energy of 10 MV was 4~5% lower than that for 6 MV. This indicated that the higher photon energy, lesser is the attenuation. The results of this study indicated that the attenuation rate for the 6D robotic couch was confirmed to be 1% larger than that for the standard exact couch at 6 MV and $180^{\circ}$. In the case of the standard exact couch, the dose attenuation was found to change rapidly in accordance with the phase ("In position" and "Out position") of the sliding rail.

• Economic and Environmental Geology
• /
• v.20 no.1
• /
• pp.1-18
• /
• 1987

The Cheolam silver deposits are emplaced along the fractures in breccia dike and the Hongjesa granite. Breccia dike contains fragments of late Cretaceous acidic volcanic rocks and other fragments of various rocks distributed in the mine area. Therefore it is presumed that the mineralization was taken place in later than late Cretaceous time. Mineral paragenesis is complicated by multiple episodes of fracturing. Six distinct depositional stages can be recognized: stage I, deposition of base metal sulfides; stage II, deposition of base metal sulfides and silver minerals; stage III, deposition of carbonates; stage IV, deposition of silver minerals and base metal sulfides; stage V, deposition of silver minerals; stage VI, deposition of barren quartz. Silver minerals from the deposits are native silver, acanthite, pyrargyrite, argentian tetrahedrite, stephanite, polybasite, pearceite, allargentum, antimonial silver and electrum. Fluid inclusion studies ware carried out for stage I, II, IV and VI quartz and stage III calcite. Homogenization temperatures for each stage are as follows: stage I, from $225^{\circ}$ to $360^{\circ}C$; stage II, from $145^{\circ}$ to $220^{\circ}C$; stage III, from $175^{\circ}$ to $240^{\circ}C$; stage IV, from $130^{\circ}$ to $185^{\circ}C$; stage VI, from $120^{\circ}$ to $145^{\circ}C$. Salinities of ore fluids were in the range of 4 and 10 wt.% equivalent NaCl over stage I and stage VI. Ore mineralogical data of each stage indicate that temperatures are within the range of homogenization temperature of fluid inclusions and sulfur fugacities declined steadily from $10^{-9.7}atm$. to $10^{-18.7}atm$. through stage I into stage V.