• Title/Summary/Keyword: $3{\times}3$ sector

Search Result 102, Processing Time 0.026 seconds

Disk Sector Antenna fed by CPW for UWB Communications (UWB 통신용 CPW 급전 디스크 섹터 안테나)

  • Lim, Jung-Hyun;Lee, Min-Soo;Yang, Doo-Yeong
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.10 no.2
    • /
    • pp.303-312
    • /
    • 2009
  • In this paper, we design and fabricate a disk sector antenna fed by CPW fur UWB communications. Also, we insert a rectangular slit on the arc-edge of the disk sector antenna. Then, the antenna has the directivity of E-면. In order to design the antenna, the input impedance is matched with the feed line of $50{\Omega}$ as varying the physical antenna parameters, which are the radius, the flare angle of disk sector, the length of ground, and the length of ground comer near by feed tine. Dimension of the antenna designed for UWB communication is $72mm{\times}26mm$ and bandwidth through computer simulation is $3{\sim}13GHz$. From the measured results, the bandwidth is $1.98{\sim}11GHz$. Return loss and gain of the fabricated antenna are -50.38dB, 1.34dBi at 3.5GHz, -12.27dB, 3.35dBi at 5.5GHz, -23.2dB, 3.8dBi at 8GHz and -16.17dB, 5.2dBi at 10GHz, respectively.

The Design of a Broadband E-plane H Sectoral Horn Phased Array Antenna Using Mutual Coupling (상호 결합을 이용한 광대역 E-면 H 섹터 혼 위상 배열 안테나 설계)

  • Lee, Cheol-Soo;Pack, Jeong-Ki
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.18 no.6 s.121
    • /
    • pp.620-628
    • /
    • 2007
  • An H-sector horn antenna has a constant beam coverage characteristic and it can be useful for application to a wide band phased array antenna system. In this paper, we designed a broadband E-plane H-sector horn phased-array antenna, which has a 3:1 bandwidth and ${\pm}60^{\circ}$ beam steering capability. An H-sector hem antenna was designed to have $30{\sim}50^{\circ}$ half-power beam width in the principal H-plane. The active reflection coefficient including mutual coupling was calculated using a waveguide simulator, and the active reflection characteristic was improved by mutual coupling over wide frequency range. Using these results, an $8{\times}1$ H-sector phased array antenna was fabricated. The measurement results for the half-power beam width in the principal H-plane and the active reflection coefficient showed a good agreement with the simulation results. The peak-value pattern in the steered radiation beams also agreed well with the active element pattern. The measured active reflection coefficients within the beam steering range are mostly less than 0.3 over the 3:1 frequency range.

FABRICATION OF HIGH QUALITY YBa$_2$Cu$_3$O$_{y}$ THIN FILMS USING PULSED LASER DEPOSITION

  • Lee, Eun-Hong;Park, Sang-Jin;Song, I-Hun;Song, In-Sang;Gohng, Jun-Ho;Sok, Jung-Hyun;Lee, Jo-Won
    • Journal of Surface Science and Engineering
    • /
    • v.29 no.5
    • /
    • pp.437-442
    • /
    • 1996
  • High quality $YBa_2Cu_3O_y$(YBCO) thin films for directly coupled dc superconducting quantum interference device (SQUID) were fabricated by pulsed laser deposition. Several critical parameters have been optimized through systematic studies. Thus, the films showing the $T_c$ of above 91K and $J_c$ of above$2\times10^6A/cm^2$ at 77K were routinely obtained. Extensive AFM and X-ray diffraction studies have been conducted for morphological and structural analyses. The directly coupled DC-SQUIDs were fabricated from the YBCO thin films deposited on $SrTiO_3$ bicrystals under the optimized conditions. The measurement on $2I_c$ and swing voltage give 200$\mu$A and 17$\mu$V at 77K, respectively.

  • PDF

A Study on the Research Condition and Efficiency of Artificial reefs of Rokdo Sea region of Chungnam Province (충청남도 녹도해역의 인공어초 효과와 상태에 관한 연구)

  • Park, Jong-Soo;Seo, Man-Seok;Kim, Ji-Hyun
    • Journal of Fisheries and Marine Sciences Education
    • /
    • v.13 no.1
    • /
    • pp.87-98
    • /
    • 2001
  • 1. The bottom mean size of the research area had been showed 86.8% in, 13.2% in mud artificial sector, but and 82.4% in mud at comparative sector. 2. The water temperature had been showed $11.2{\sim}12^{\circ}C$ in surface, $10.9^{\circ}C$ in mid layer, $10.6{\sim}10.8^{\circ}C$ in lower layer. also, The salinity had been showed $31.85{\sim}31.95_{psu}$ in surface, $31.82{\sim}31.97_{psu}$ in mid layer, $31.85{\sim}31.97_{psu}$ at lower layer. The transparency was showed 3.6~5.6m. 3. The conservation condition of reefs was partially grooved and buried the lower part of reefs established '95~'96years but was good condition generaly. 4. The attached fauna has been appeared fisheres botanical specise 6, fisheries animate species 5. 5. The lure of fisheres has been appeared 17 species in reefs sector, 10 species in comparative sector(natural fishing ground). 6. The catchs of C.P.U.E by fishery was catched 2.2~3.3 times in reefs sector than the natural fishing ground. but the individuals was much catched in traps. The jumbo type reefs gill netter were much catched in square artificial reefs. The weight of fishery was much captured in jumbo type reefs.

  • PDF

Classification Analysis on Private Security (민간경비에 대한 분류 분석)

  • Cho, Kwang-Rae
    • Korean Security Journal
    • /
    • no.51
    • /
    • pp.103-124
    • /
    • 2017
  • The purpose of this study is to analyze regional clusters and discrimination on size and sector of private security in national 16 areas in 2015. The results of the study using hierarchical cluster analysis and discriminant analysis are as follows. First, we can classify national 16 areas into 3 clusters, such as Large Area(1), Medium Area(2), and Small Area(3) according to the size of private security. The discriminant functions D for each cluster is as follows: (1) Large Area(1) = -383.981 + (.108 ${\times}$ number of security companies) + (.016 ${\times}$ number of guards), (2) Medium Area(2) = -35.570 + (.029 ${\times}$ number of security companies) + (.005 ${\times}$ number of guards), and (3) Small Area(3) = -5.381 + (.012 ${\times}$ number of security companies) + (.002 ${\times}$ number of guards). Second, we can classify national 16 areas into 3 clusters, such as Large Area(1), Medium Area(2), and Small Area(3) according to the sector of private security. The discriminant function D for each cluster is as follows: (1) Large Area(1) = -2224.402 + (-.562 ${\times}$ facilities security) + (1.245 ${\times}$ protection security) + (171.142 ${\times}$ convoy security) + (-2.722 ${\times}$ electronic security) + (2.020 ${\times}$ special security), (2) Medium Area(2) = -4.762 + (.052 ${\times}$ facilities security) + (.063 ${\times}$ protection security) + (-3.819 ${\times}$ convoy security) + (.110 ${\times}$ electronic security) + (-.165 ${\times}$ special security), and (3) Small Area(3) = -125.742 + (-.009 ${\times}$ facilities security) + (.432 ${\times}$ protection security) + (5.748 ${\times}$ convoy security) + (5.530 ${\times}$ electronic security) + (-.901 ${\times}$ special security).

  • PDF

Statistical Analysis of Low-latitude Pi2 Pulsations Observed at Bohyun Station in Korea

  • Jun, Chae-Woo;Kim, Khan-Huk;Kwon, Hyuck-Jin;Lee, Dong-Hun;Lee, Ensang;Park, Young-Deuk;Hwang, Junga
    • Journal of Astronomy and Space Sciences
    • /
    • v.30 no.1
    • /
    • pp.25-32
    • /
    • 2013
  • We statistically investigated the properties of low-latitude Pi2 pulsations using Bohyun (BOH, Mlat = $29.8^{\circ}$, L = 1.35) ground magnetometer data in 2008. For this 1-year interval, 582 Pi2 events were identified when BOH was in the nightside from 1800 to 0600 local times. We found the following Pi2 characteristics. (1) The occurrence distribution of Pi2s is relatively constant in local times. (2) The Pi2 frequency varies in local times. That is, Pi2 pulsations in postmidnight sector had higher frequency than in premidnight sector. (3) Pi2 power in premidnight sector is stronger than in postmidnight sector. (4) Pi2 frequency has positive correlation with solar wind speed and AE index. (5) Pi2 power has not a clear correlation with solar wind parameters. This indicates that Pi2 power is not controlled by external sources. (6) It is found that the most probable-time between Pi2 onsets is ${\Delta}t$ ~ 37.5 min: This is interpreted to be the period between Pi2 pulsations when they occur cyclically. We suggest that ${\Delta}t$ ~ 37.5 min is the occurrence rate of reconnection of open field lines in the tail lobe.

Analysis of Forestry Structure and Induced Output Based on Input - output Table - Influences of Forestry Production on Korean Economy - (산업관련표(産業關聯表)에 의(依)한 임업구조분석(林業構造分析)과 유발생산액(誘發生産額) -임업(林業)이 한국경제(韓國經濟)에 미치는 영향(影響)-)

  • Lee, Sung-Yoon
    • Journal of the Korean Wood Science and Technology
    • /
    • v.2 no.4
    • /
    • pp.4-14
    • /
    • 1974
  • The total forest land area in Korea accounts for some 67 percent of the nation's land total. Its productivity, however, is very low. Consequently, forest production accounts for only about 2 percent of the gross national product and a minor proportion of no more than about 5 percent versus primary industry. In this case, however, only the direct income from forestry is taken into account, making no reference to the forestry output induced by other industrial sectors. The value added Or the induced forestry output in manufacturing the primary wood products into higher quality products, makes a larger contribution to the economy than direct contribution. So, this author has tried to analyze the structure of forestry and compute the repercussion effect and the induced output of primary forest products when utilized by other industries for their raw materials, Hsing the input-output table and attached tables for 1963 and 1966 issued by the Bank of Korea. 1. Analysis of forestry structure A. Changes in total output Durng the nine-year period, 1961-1969, the real gross national product in Korea increased 2.1 times, while that of primary industries went up about 1. 4 times. Forestry which was valued at 9,380 million won in 1961, was picked up about 2. 1 times to 20, 120 million won in 1969. The rate of the forestry income in the GNP, accordingly, was no more than 1.5 percent both in 1961 and 1962, whereas its rate in primary industries increased 3.5 to 5.4 percent. Such increase in forestry income is attributable to increased forest production and rise in timber prices. The rate of forestry income, nonetheless, was on the decrease on a gradual basis. B. Changes in input coefficient The input coefficient which indicates the inputs of the forest products into other sectors were up in general in 1966 over 1963. It is noted that the input coefficient indicating the amount of forest products supplied to such industries closely related with forestry as lumber and plywood, and wood products and furniture, showed a downward trend for the period 1963-1966. On the other hand, the forest input into other sectors was generally on the increase. Meanwhile, the input coefficient representing the yolume of the forest products supplied to the forestry sector itself showed an upward tendency, which meant more and more decrease in input from other sectors. Generally speaking, in direct proportion to the higher input coefficient in any industrial sector, the reinput coefficient which denotes the use of its products by the same sector becomes higher and higher. C. Changes in ratio of intermediate input The intermediate input ratio showing the dependency on raw materials went up to 15.43 percent m 1966 from 11. 37 percent in 1963. The dependency of forestry on raw materials was no more than 15.43 percent, accounting for a high 83.57 percent of value added. If the intermediate input ratio increases in any given sector, the input coefficient which represents the fe-use of its products by the same sector becomes large. D. Changes in the ratio of intermediate demand The ratio of the intermediate demand represents the characteristics of the intermediary production in each industry, the intermediate demand ratio in forestry which accunted for 69.7 percent in 1963 went up to 75.2 percent in 1966. In other words, forestry is a remarkable industry in that there is characteristics of the intermediary production. E. Changes in import coefficient The import coefficient which denotes the relation between the production activities and imports, recorded at 4.4 percent in 1963, decreased to 2.4 percent in 1966. The ratio of import to total output is not so high. F. Changes in market composition of imported goods One of the major imported goods in the forestry sector is lumber. The import value increased by 60 percent to 667 million won in 1966 from 407 million won in 1963. The sales of imported forest products to two major outlets-lumber and plywood, and wood products and furniture-increased to 343 million won and 31 million won in 1966 from 240million won and 30 million won in 1963 respectively. On the other hand, imported goods valued at 66 million won were sold to the paper products sector in 1963; however, no supply to this sector was recorded in 1963. Besides these major markets, primary industries such as the fishery, coal and agriculture sectors purchase materials from forestry. 2. Analysis of repercussion effect on production The repercussion effect of final demand in any given sector upon the expansion of the production of other sectors was analyzed, using the inverse matrix coefficient tables attached to the the I.O. Table. A. Changes in intra-sector transaction value of inverse matrix coefficient. The intra-sector transaction value of an inverse matrix coefficient represents the extent of an induced increase in the production of self-support products of the same sector, when it is generated directly and indirectly by one unit of final demand in any given sector. The intra-sector transaction value of the forestry sector rose from 1.04 in 1963 to 1, 11 in 1966. It may well be said, therefore, that forestry induces much more self-supporting products in the production of one unit of final demand for forest products. B. Changes in column total of inverse matrix coefficient It should be noted that the column total indicates the degree of effect of the output of the corresponding and related sectors generated by one unit of final demand in each sector. No changes in the column total of the forestry sector were recorded between the 1963 and 1966 figures, both being the same 1. 19. C. Changes in difference between column total and intra-sector transaction amount. The difference between the column total and intra-sector transaction amount by sector reveals the extent of effect of output of related industrial sector induced indirectly by one unit of final demand in corresponding sector. This change in forestry dropped remarkable to 0.08 in 1966 from 0.15 in 1963. Accordingly, the effect of inducement of indirect output of other forestry-related sectors has decreased; this is a really natural phenomenon, as compared with an increasing input coefficient generated by the re-use of forest products by the forestry sector. 3. Induced output of forestry A. Forest products, wood in particular, are supplied to other industries as their raw materials, increasng their value added. In this connection the primary dependency rate on forestry for 1963 and 1966 was compared, i. e., an increase or decrease in each sector, from 7.71 percent in 1963 to 11.91 percent in 1966 in agriculture, 10.32 to 6.11 in fishery, 16.24 to 19.90 in mining, 0.76 to 0.70 in the manufacturing sector and 2.79 to 4.77 percent in the construction sector. Generally speaking, on the average the dependency on forestry during the period 1963-1966 increased from 5.92 percent to 8.03 percent. Accordingly, it may easily be known that the primary forestry output induced by primary and secondary industries increased from 16, 109 million won in 1963 to 48, 842 million won in 1966. B. The forest products are supplied to other industries as their raw materials. The products are processed further into higher quality products. thus indirectly increasing the value of the forest products. The ratio of the increased value added or the secondary dependency on forestry for 1963 and 1966 showed an increase or decrease, from 5.98 percent to 7.87 percent in agriculture, 9.06 to 5.74 in fishery, 13.56 to 15.81 in mining, 0.68 to 0.61 in the manufacturing sector and 2.71 to 4.54 in the construction sector. The average ratio in this connection increased from 4.69 percent to 5.60 percent. In the meantime, the secondary forestry output induced by primary and secondary industries rose from 12,779 million Wall in 1963 to 34,084 million won in 1966. C. The dependency of tertiary industries on forestry showed very minor ratios of 0.46 percent and 0.04 percent in 1963 and 1966 respectively. The forestry output induced by tertiary industry also decreased from 685 million won to 123 million won during the same period. D. Generally speaking, the ratio of dependency on forestry increased from 17.68 percent in 1963 to 24.28 percent in 1966 in primary industries, from 4.69 percent to 5.70 percent in secondary industries, while, as mentioned above, the ratio in the case of tertiary industry decreased from 0.46 to 0.04 percent during the period 1963-66. The mining industry reveals the heaviest rate of dependency on forestry with 29.80 percent in 1963 and 35.71 percent in 1966. As it result, the direct forestry income, valued at 8,172 million won in 1963, shot up to 22,724 million won in 1966. Its composition ratio lo the national income rose from 1.9 percent in 1963 to 2.3 per cent in 1966. If the induced outcome is taken into account, the total forestry production which was estimated at 37,744 million won in 1963 picked up to 105,773 million won in 1966, about 4.5 times its direct income. It is further noted that the ratio of the gross forestry product to the gross national product. rose significantly from 8.8 percent in 1963 to 10.7 percent in 1966. E. In computing the above mentioned ratio not taken into consideration were such intangible, indirect effects as the drought and flood prevention, check of soil run-off, watershed and land conservation, improvement of the people's recreational and emotional living, and maintenance and increase in the national health and sanitation. F. In conclusion, I would like to emphasize that the forestry sector exercices an important effect upon the national economy and that the effect of induced forestry output is greater than its direct income.

  • PDF

Social Support in the Times of Social Distancing: Learnings from the South Asian Context

  • BASHIR, Mohsin;SALEEM, Ammara;ALI, Qamar
    • The Journal of Asian Finance, Economics and Business
    • /
    • v.9 no.3
    • /
    • pp.65-76
    • /
    • 2022
  • This study will examine the relationship between social support from the work and family domains, referred to as multiple social network ties (MSNT), and employees' job and family-related performance outcomes during the COVID-19 crisis. The study also demonstrates the importance of employees' work-family balance (WFB) in moderating the association between MSNT and job and family-related performance. A two-wave design was used to collect data from 320 managerial level personnel in Pakistan's textile sector. The path analysis technique of structural equation modelling (SEM) was used to analyze the responses. In times of crisis, social support mechanisms could potentially replace organizational support mechanisms for employees dealing with work and family obligations, according to the study. The findings of this study show that work-family balance is a significant partial mediator between MSNT and employees' job and family-related outcomes during the COVID-19 pandemic, according to a best-fit model. This research supports the pragmatic view of MSNT's action mechanism in generating jobs for employees and family-related results, especially in uncertain situations. According to the findings, employees who have a positive work-life balance are happier and more productive in both work and personal life. It has major implications for human resource management (HRM) research and practice.

A Study on the Characteristics of Airborne Trace Metal Elements using Diverse Statistical Approaches in the Daejeon 1st and 2nd Industrial Complex Area (다양한 통계기법을 이용한 대전 1,2 공단지역의 미량금속원소의 특성 연구)

  • 이진홍;장미숙;임종명
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.18 no.2
    • /
    • pp.95-112
    • /
    • 2002
  • A precision analysis was conducted for the quantification of trace metal levels in airborne particulates using ICP-MS. According to our study the quantitative analysis using Whatman grade 41 filters produces more precise and representative values of metal concentrations than that using EPM 2000 filters. The mean concentration of PM 10 analyzed during 1998 ~ 2000 was 82 $\mu$g/m$^3$. The concentrations of human carcinogens such as As and Cr were 8.65 and 25.87 ng/m$^3$, respectively, while those of probable human carcinogens such as Cd and Pb were 3.13 and 219.46 ng/m$^3$, respectively. Time-weighted mean concentration, calculated using surface wind speed and direction, indicated that there were differences between metals of crustal origin and metals of anthropogenic origin. The rectorial concentrations of anthropogenic metals and PM 10 were higher for north -west sector with calm or low wind speed conditions than for any other sector with high wind speed conditions. On the contrary, the rectorial concentrations of crustal metals were high with high wind speed. In addition, the sectorial concentrations of crustal metals were more affected by south-west wind directions, which were compared with those of anthropogenic metals. The enrichment factor (EF) values of many anthropogenic metals were higher than 50, while those of crustal metals were lower than 3, respectively. The concentrations of Cr and Ni in Daejeon industrial complex area were 11 times higher than those in the background site of Kuopio in Finland, while that of Pb in the complex area was 22 times higher, respectively.

Medical Care Utilization of Tuberculosis Patients in Private Sector (민간의료기관을 이용하는 결핵환자의 의료이용 분석)

  • Kang, Gil-Won;Yoon, Seok-Jun;Kim, Chang-Yup;Shin, Young-Soo
    • Journal of Preventive Medicine and Public Health
    • /
    • v.31 no.4 s.63
    • /
    • pp.814-827
    • /
    • 1998
  • In this study we analyzed the insurance claims data to investigate the medical care utilization pattern of tuberculosis patients in private sector. We selected the claims of principal or secondary diagnosis with tuberculosis from claims database of National federation of Medical Insurance, from December 1995 to November 1996. Both spell-based analysis and person-based analysis were carried out. In spell-based analysis, type and location of treatment facilities, distribution of diagnoses, number of outpatient/inpatient treatments were analyzed. Additionally in person-based analysis, number of tuberculosis patients, demographic characteristics, number of treatments per person, frequency and pattern of change in source of care were analyzed. The results were as follows 1. The number of treatments with tuberculosis was 863,641 from 1 December 1995 to 30 November 1996. The number of patients was 313.964. 2. Most of tuberculosis patients in private sector were treated in general hospital (45.8%) and clinics(42.2%) 3. About 77.7% of tuberculosis patients who were treated more than two times did not change the source of care. 18,9% of tuberculosis patients changed source of care only once. Even when we limited tuberculosis patient to those who were treated more than five times and whose treatment period were longer than six months, 94.7% of patients did not change source of care at all, or changed treatment facility only once. 4. The probability of change in source of rare was higher in pulmonary tuberculosis, in twenties, and in rural area respectively than other tuberculosis. In conclusion, healer shopping of tuberculosis patients was not serious as expected. However special attention is needed to pulmonary tuberculosis in twenties and rural area.

  • PDF