• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.3
• /
• pp.273-288
• /
• 1997

In this work, the electromagnetic waves scattered from 2-dimensional random rough surfaces are characterized by the $4\times4$ Mueller matrix elements. The full wave solutions are used to compute these elements. The results of the full wave solutions for 1-dimensional random rough surfaces were shown to agree well with those of the experiment and the method of moments. The Mueller matrix elements are related to the like and cross polarized radar cross sections as well as to the relative phase of the vertically and horizontally polarized waves. The $4\times4$ Mueller matrix elements completely characterize electromagnetic scattering from target. The computed results of this paper can be useful to the field of active remote sensing or RCS.

• Journal of Plant Biology
• /
• v.15 no.1
• /
• pp.33-41
• /
• 1972

Nine shrub layer communities under two relatively well conserved natural summer green forests in the central region of Korean Peninsula were studied for the pattern of stem distribution in terms of Greig-Smith's multiple split-plot experiment and for the association between the population of the two main species in terms of Kershaw's covariance analysis respectively. Four contiguous belt transects, $4{\times}64m size with 1{\times}1m$ basic unit, were set in each shrub layer communities. Significant primary clumps with $1{\times}1m or 1{\times}2m$ dimension wer observed consistently throughout the nine study sites. The primary clumps themselves were significantly distributed either regularly or at random. The association between the two principal species of each shrub layer is highly significantly either positive or negative in $1{\times}1m or 1{\times}2m$ dimension. As the plot size increases from $1{\times}1m to 8{\times}8m$ the associational trends were changed from negative to positive direction in one forests. But the change from positive to negative direction and the consistent negative association were also observed from the other forest. All of the association trends were observed only from $1{\times}1m to 4{\times}4m$ dimension. These results are suggestive that the distributional pattern of the shrub layer species under the summer green forest is simple mosaic fashioned with $1{\times}1m or 1{\times}2m$ dimension. The rest of the principal species are located in that matrix. The simple mosaic pattern of two principal species are located in that matrix. The simple mosaic pattern of two principal species seems to be controlled by change in micro-environmental pattern. Differences between the primary random group and clumped group among sites also suggest that competition exists for light or/and soil between primary clumped groups.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.4
• /
• pp.437-446
• /
• 2018

This paper describes the real-time logic implementation of orthogonal matching pursuit(OMP) algorithm for compressive sensing digital receiver. OMP contains various complex-valued linear algebra operations, such as matrix multiplication and matrix inversion, in an iterative manner. Xilinx Vivado high-level synthesis(HLS) is introduced to design the digital logic more efficiently. The real-time signal processing is realized by applying dataflow architecture allowing functions and loops to execute concurrently. Compared with the prior works, the proposed design requires 2.5 times more DSP resources, but 10 times less signal reconstruction time of $1.024{\mu}s$ with a vector of length 48 with 2 non-zero elements.

• ETRI Journal
• /
• v.39 no.3
• /
• pp.336-344
• /
• 2017

In this paper, we propose a convenient microwave orbital angular momentum (OAM) mode generation and multiplexing method operating in the 18 GHz frequency band, based on a $2{\times}2$ uniform circular array and a $4{\times}4$ Butler matrix. The three OAM modes -1, 0, and +1 were generated and verified using spatial S-parameter measurements; the measured back-to-back mode isolation was greater than 17 dB in the full 17 GHz to 19 GHz range. However, the radiated OAM beam centers were slightly dislocated and varied with both frequency and the mode index, because of the non-ideal characteristics of the Butler matrix. This resulted in mode isolation degradation and transmission distance limitations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9C
• /
• pp.860-870
• /
• 2005

In this paper we propose a new method to derive GRM(Generalized Reed-Muller) coefacients for each $2^{n}$ polarities using cell of karnaugh map(k-map). Generally, there are the serial and parallel method to derive GRM coefficients. As a serial method, Green method generates GRM coefncients using transform matrix. And as a parallel method, Besslich algorithm produces GRM coefficients of each polarity using the generated anteriorly. Green's method generates GRM coefficients for n-variable by calculating transform matrix for one-variable and n-times kronecker product this matrix. And Besslich's method generates GRM coefficients of each polarity in order of Grey-code. But those methods have disadvantages that the number of variable exceeding four makes transform matrix large and there are so many operation steps. In this paper, GRM coefficients is generated by producing cell [$f_{i}$] minimizing variable on k-map and operating this cell [$f_{i}$] and transform matrix for one-variable. So, we can generate GRM coefficients of all polarities easily by using the proposed method.

• Journal of Biosystems Engineering
• /
• v.33 no.1
• /
• pp.1-6
• /
• 2008

The output of the Stirling engine is influenced by the regenerator effectiveness. The regenerator effectiveness is influenced by heat transfer and flow friction loss of the regenerator matrix. In this paper, in order to provide basic data for the design of regenerator matrix, characteristics of flow friction loss were investigated by a packed method of matrix in the oscillating flow as the same condition of operation in a Stirling engine. As matrices, two different wire screens were used. The results are summarized as follows; 1. With the wire screen of No. 50 as regenerator matrices, pressure drop of working fluid of the oscillating flow is shown as 3 times higher than that of one directional flow, not too much influenced by the number of packed meshes. 2. With the wire screen of No. 100 as regenerator matrices, pressure drop of working fluid of the oscillating flow is shown as 2.5 times on the average higher than that of one directional flow, not too much influenced by the number of packed meshes. 3. Under one directional flow which used regenerator matrices with both 200, 240, and 280 wire screens of No. 50 and 320, 370, and 420 wire screens of No. 100, the relationship between the friction factor and Reynold No. is shown as the following formula. $$f=\frac{0.00326639}{Re\iota}-1.29106{\times}10^{-4}$$ 4. Under oscillating flow which used regenerator matrices with both 200, 240, and 280 wire screens of No. 50 and 320, 370, and 420 wire screens of No. 100, the relationship between the friction factor and Reynold No. is shown as the following formula. $$f_r=\frac{0.000918567}{Re\iota}+1.86101{\times}10^{-5}$$ 5. The pressure drop is shown as high in proportion as the number of meshes has been higher, and the number of packed wire screens as matrices increases.

• Journal of Powder Materials
• /
• v.6 no.4
• /
• pp.286-293
• /
• 1999

This study was to analyse the relationship between process parameters of the sintered composite and plasma nitriding properties with pulsed DC plasma. Fe-40at%$SiC_p$ composites of full density were fabricated by hot pressing at 1100~$1150^{\circ}C$. Sintered Fe-40at%Al and Fe-40at%$Al/SiC_p$ alloys were nitrided under pulsed DC plasma. Excellent surface hardness in the FeAl alloys could be obtained by plasma nitriding. ($H_v$ :100gf, diffusion layer : 1100~$1450kg/mm^2$, matrix : 330~$360kg/mm^2$) The wear resistance of $FeAl/SiC_p$ composites were improved about by 4~6times than FeAl and nitrided $FeAl/SiC_p$ were improved about 2 times than $FeAl/SiC_p$ matrix.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.8
• /
• pp.2261-2264
• /
• 2010

In this work, mechanical and electrical properties of graphenes (GP)/carbon nanotubes (CNTs) co-reinforced high density polyethylene (HDPE) matrix composites were studied. The microstructure, morphologies, and electric properties of the composites were evaluated by XRD, TEM, and 4-probe methods, respectively. It was found that the electric resistivity of 0.5 wt %-GP/HDPE was immeasurable, and 2.0 wt %-CNTs/HDPE showed high resistivity ($6.02{\times}10^4{\Omega}{\cdot}cm$). Meanwhile, GP (0.5 wt %)/CNTs (2.0 wt %)/HDPE showed excellent low resistivity ($3.1{\times}10^2{\Omega}{\cdot}cm$). This result indicates that the co-reinforcement systems can dramatically decrease electric resistivity of the carbon/polymer nanocomposites.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.95-98
• /
• 2012

This paper describes a multiphase delay-locked loop (DLL) that generates a 32-phase output clock over the operating frequency range of 40 MHz to 280 MHz. The matrix-based delay line is used for high resolution of 1-bit delay. A calibration scheme, which improves the linearity of a delay line, is achieved by calibrating the nonlinearity of the input stage of the matrix. The multi-phase DLL is fabricated by using 0.11-${\mu}m$ CMOS process with a 1.2 V supply. At the operating frequency of 125MHz, the measurement results shows that the DNL is less than +0.51/-0.12 LSB, and the measured peak-to-peak jitter of the multi-phase DLL is 30 ps with input peak-to-peak jitter of 12.9 ps. The area and power consumption of the implemented DLL are $480{\times}550{\mu}m^2$ and 9.6 mW at the supply voltage of 1.2 V, respectively.

• Archives of Pharmacal Research
• /
• v.10 no.2
• /
• pp.88-93
• /
• 1987

Chitosan ($\beta$-D-glucosaminan) is chemically prepared from chitin (N-acetyl-$\beta$- D-glucosaminan) which is an unutilized natural resource. We now report on the suitability of the chitosan matrix for use as vehicles for the controlled release of drugs. Salicylic acid and aspirin were used as model drugs in this study. The permeation of salicylic acid in the chitosan membranes was determined in a glass diffusion cell with two compartments of equal volume. Drug release studies on the devices were conducted in a beaker containing 5% sodium hydroxide solution. Partition coefficient (Kd) value for acetate membrane (472) is much greater than that for fluoro-perchlorate chitosan membrane (282). Higher Kd value for acetate chitosan membrane appears to be inconsisstent with the bulk salicylic acid concentration. The permeability constants of fluoro-perchlorate and acetate chisotan membranes for salicylic acid were 3.139 ${\times}10^{-7}cm^2$ min up to 60 min and that of 30% aspirin in the devices was 4.739${\times}10^{-7}cm^2$sec upto 60 min. As the loading dose of aspirin in a chitosan device increased, water up-take of chitosan device increased, but in case of salicylic acid it decreased. The release rate increased with increase in the molecular volume of the drugs. Thses result suggest that the release mechanism may be controlled mainly by diffusion through pores.