골격성 II급 1류 부정교합을 치료하는 방법으로 Activator, FR(Functional regulator), Headgear, Herbst 장치, Twin-block등의 많은 장치가 사용되어진다. 이러한 장치를 사용할 때 기대하는 가장 바람직 한 효과는 상악골의 수평적, 수직적 성장의 억제와, 하악골의 성장이 촉진되어 바람직한 골격적 관계를 가지게 되고 이러한 토대 위에 치아들이 적절하게 배열되는 것일 것이다. Teuscher장치는 Headgear의 상악골의 전하방 성장억제작용과 Activator의 하악골 성장촉진 작용을 동시에 가질 수 있도록 고안된 장치로서 실제 임상 중에 이러한 효과가 잘 구현될 수 있는지를 평가하기 위하여 성장기 남녀 각각9명(평균연령 남자 8세 11개월, 여자 9세 4개월)을 대상으로 Teuscher appliance를 평균 남아는 평균10개월, 여 아는 평균 11개월간 사용하였으며 이를 대조군과 비교 연구를 시행하였고 그 결과는 다음과 같았다. 1. 상악골의 전방 성장을 효과적으로 억제하여 주었다. 2. 상악 dentoalveolar complex의 전하방 성장을 억제하여 주었다. 3. 하악골의 전방 성장 촉진을 관찰하지 못하였다. 4. Overjet, overbite, molar key 개선에 효과적이었다. 5. 장치의 사용으로 상순의 돌출도의 개선과 안모가 향상되었다.
Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
제48권1호
/
pp.21-32
/
2022
Objectives: Inferior alveolar nerve block (IANB) is commonly used for mandibular dentoalveolar surgery. The objective of this study was to evaluate and compare the effectiveness of coadministration of dexamethasone (4 mg/mL) or adrenaline (0.01 mg/mL) as an adjuvant with lignocaine 2% in IANB during third molar surgery (TMS). Patients and Methods: This double-blind, randomized controlled trial was conducted between March and August 2020. The investigators screened patients needing elective TMS under local anesthesia. Based on strict inclusion and exclusion criteria, patients were enrolled in this study. These patients were assigned randomly into two study groups: dexamethasone group (DXN) or adrenaline group (ADN). Outcome variables were postoperative edema, trismus, visual analogue scale (VAS), perioperative analgesia, onset time, and duration of IANB. Results: Eighty-three patients were enrolled in this study, of whom 23 (27.7%) were eliminated or excluded during follow-up. This study thus included data from 60 samples. Mean age was 32.28±11.74 years, including 28 females (46.7%) in the ADN (16 patients, 57.1%) and DXN (12 patients, 42.9%) groups. The duration of action for DXN (mean±standard deviation [SD], 4:02:07±0:34:01 hours; standard error [SE], 0:06:00 hours; log-rank P=0.001) and for ADN (mean±SD, 1:58:34±0:24:52 hours; SE, 0:04:42 hours; log-rank P=0.001) were found. Similarly, time at which 1st analgesic consume and total number of nonsteroidal antiinflammatory drugs need to rescue postoperative analgesia was found statistically significant between study groups (t (58)=-11.95; confidence interval, -2:25:41 to -1:43:53; P=0.001). Early-hours VAS was also significantly different between the study groups. Conclusion: A single injection of dexamethasone prolongs the duration of action of lignocaine 2% IANB. Additionally, it can be used in cases where adrenaline is contraindicated.
The author observed the changes of dental arch dimensions and compared spae-maintainer group with non-space-maintainer group after primary tooth extraction. The results were as follows
1) The rate of growth of dental arch of expeirmental group in intercanine width and in inter-1st molar width was more rapid than that of the control group.
2) Arch length is almost no dimensions but it was slightly decreased in lower arch.
3) Dental arch growth and tooth eruption were stimulated by space-maintainer appliance, so it is the best way to replace a new appliance at least once a year.
4) It is thought that satisfactory conclusions in this observation must be researched successively until the mixed dentition completes.
II급 치성교합을 가진 환자에서는 I급 구치부 교합관계를 형성하기 위하여 상악 대구치의 원심이동이 필요하다. 본 연구에서는 pendulum장치를 이용한 상악 대구치의 원심이동시 대구치의 이동양상과 고정원의 전방이동 및 정출정도 등 치아와 골격에 미치는 영향을 평가하기 위하여 시행되었다. 상악 제1대구치를 원심이동시켜 I급 구치관계가 형성된 19명의 환자(남: 8명, 여: 11명, 평균연령 $11.68{\pm}1.52$세)에서 장치 장착 전과 장치제거 직후에 얻어진 측면두부방사선사진을 비교 분석하여 다음과 같은 결과를 얻었다. 1. I급 교합관계를 형성하기 위해서 제1대구치는 평균 $2.94{\pm}1.54mm$ 원심이동하였으며, $1.17{\pm}0.97mm$ 함입되었고, 소요기간은 평균 $18.13{\pm}7.95$일이었다. 2. 고정원으로 사용된 치아는 $1.34{\pm}1.40mm$로 유의하게 전방 이동하였으며, $0.48{\pm}0.99mm$ 정출되었다. 또한 절치는 유의한 전방이동 및 순측경사가 발생하였다(P<0.05). 3. 구개평면과 하악평면이 이루는 각은 유의한 증가를 보였다(P<0.05) 4. 제 1소구치 또는 제 1유구치가 고정원으로 이용된 경우 제2소구치 또는 제2유구치가 이용된 경우 보다 전방이동이 증가하였다(P<0.005) 5. 제2대구치의 발육단계에 따른 제1대구치 및 제2대구치의 이동양상은 어떤 항목과도 유의성이 없었다(P<0.05). 6. 얻어진 총 공간 중 74%는 제1대구치의 원심이동이, 26%는 소구치의 전방이동에 의하여 얻어졌다. 이상의 결과를 종합하여 볼 때 pendulum appliance는 상악 대구치의 원심이동에 매우 효과적이었으며, 고정원의 소실을 최소화하기 위해 제2유구치 또는 제 2소구치가 포함되어야 한다. 또한 제1대구치의 원심경사는 필연적으로 일어나며, 이를 최소화하기 위한 노력이 계속되어야 할 것으로 사료된다.
The present study was designed to elucidate the effects of the Co-60 γ irradiation and/or calcium-deficient diet on the periodontal tissue formation in rat pups. The pregnant three-week old Sprague-Dawley rats were used for the study. The experimental group was divided into two groups, irradiation/normal diet group (Group 2) and irradiation/calcium-deficient diet group (Group 3). The control group was non-irradiation/normal diet group (Group 1). The abdomen of the rats at the 19th day of pregnancy were irradiated with single absorbed dose of 350 cGy. The rat pups were sacrificed on the 14th day after delivery, and the maxillae including molar tooth germ were taken. The specimens including the 1st molar tooth germ were prepared to make tissue sections for light and transmission electron microscopy. Some of tissue sections for light microscopy were stained immunohistochemically with anti-fibronectin and anti-osteonectin antibodies. The results were as follows; 1. In the periodontal ligament forming area, the fibroblasts of Group Z showed irregular arrangement and low activity. The immunoreactivity between the fibroblasts and collagen fibers was decreased, compared with Group 1. The fibroblasts of Group 3 showed atrophic change and clumped nucleus. The collagen fibers showed cystic change and low immunoreactivity to the fibronectin. 2. In the cementum forming area, the cementoblasts of Group 2 showed decrease of number and atrophic change. The cementoblasts of Group 3 showed edematous change, atrophy of cytoplasm, and clumping of nucleus. 3. In the alveolar bone forming area, the bone of Group 2 was thin and various degree of immunoreactivity to the osteonectin. Group 3 showed edematous osteoblasts, fibrous degeneration of bone marrow, and weak immunoreactivity to the osteonectin.
교정치료에 있어서 고정원의 확보는 매우 중요한 문제이며 최대고정원을 얻기 위해서 미니스크류를 널리 이용하고 있다. 인접구조물을 손상시키지 않고 안전하게 미니스크류를 식립하기 위해서는 치근이나 상악동, 절치관, 비강, 대구개신경 등의 구조물의 해부학적 위치를 이해하면서 식립하는 것이 매우 중요하다. 미니스크류의 안정성의 관점에서 보면 상악골은 하악골에 비하여 골질이 단단하지 않고 탈락율이 높으며, 특히 협측골은 치근사이의 거리가 가깝고, 안정성이 높지 않다. 따라서 좀더 강한 고정원의 확보를 위하여 시술의 접근성이나 시야확보는 불리하지만 충분한 골 두께를 가지고 있는 상악구치부 구개측 치조부와 단단한 골을 가지고 있는 정중구개부위가 미니스크류 식립부위로 주목을 받고 있다. 이에 본 연구는 전산화 단층촬영 사진을 이용하여 3차원 영상프로그램을 이용하여 상악 구개측 치근 사이의 거리와 정중 구개봉합부위의 골의 두께를 계측하여 통계 분석하였으며 다음과 같은 결과를 얻었다. 1. 구개측 치근사이의 거리의 비교시 제2소구치와 제1대구치 사이, 제1대구치와 제2대구치 사이, 제1소구치와 제2소구치 사이의 순서로 유의하게 큰 치근 사이의 거리를 보였다. 2. 정중 구개부 골은 후방부위와 측방으로 갈수록 그 두께가 감소하였다. 이상의 결과로 구개측 치근 사이는 소구치와 대구치 사이가 상대적으로 안전한 부위이며 정중구개부에서는 봉합부위에 가까울수록 안전하게 미니스크류를 식립할 수 있을 것으로 생각된다.
Purpose: The purpose of this study is to evaluate the effect of CAD/CAM system milling tool wear on the marginal and internal fit of PMMA implant interim prosthesis three-dimensional manner. Methods: A total of 20 crowns were fabricated with CAD/CAM method. Their designs were unified to first molar of the left maxilla. The Customized abutments were prepared and scanned with on optical model scanner. Five crowns were milled by the newly replaced tool (1st milling), and 15 crowns were milled by 2nd, 3rd, 4th milling tool. The marginal and internal fit of 20 interim crowns were measured using the triple-scan protocol. Results: Statistically significant difference was found between the $1^{st}$ milling group ($51.8{\pm}14.6{\mu}m$) and the $3^{rd}$, $4^{th}$ milling group ($128.6{\pm}43.8{\mu}m$, $146.2{\pm}38.1{\mu}m$, respectively) at the distal margins. In the mesial margins, There was a statistically significant difference between the $1^{st}$ milling group ($63.6{\pm}25.9{\mu}m$) and the $3^{rd}$, $4^{th}$ milling group ($137.2{\pm}25.9{\mu}m$, $186.8{\pm}70.6{\mu}m$, respectively). In the distal line angle, significant difference was found between the $1^{st}$, $2^{nd}$, $3^{rd}$ milling groups and the $4^{th}$ milling group. In the mesial axial wall, significant difference was found between the $1^{st}$ milling group ($52.2{\pm}20.3{\mu}m$) and the $3^{rd}$, $4^{th}$ milling groups ($22.8{\pm}8.8{\mu}m$, $7.8{\pm}5.7{\mu}m$). Conclusion: As a result of the experiment, decrease of the marginal and internal fit was statistically significant as the number of machining cycles increased. In order to produce clinically excellent restorations, it is recommandable to consider the condition of the milling tool wear, when designing the restoration with CAD program.
To compare the stress distribution patterns between cement-retained and screw-retained implant supported fixed prostheses according to four different abutment types, a three dimensional finite element analysis was performed. The hypothetical three unit fixed partial denture case was modelled on the three implants(10mm length and 3.75 diameter) in mandibular bone. Four angles of implantation(vertical, 10, 15 and 20 degree inclined mesially) were created and three different directions of force (vertical, oblique, horizontal) were applied at the center of the second premolar and distal end of the first molar for each cases. Within the limits of this study, the results were as follows, 1. In vertically installed cases, the more stress was concentrated at upper components, but mesially inclined cases, the more stress was concentrated at cortical bone. 2, The more inclined mesially the more stress was observed, especially at cortical bone. 3. The cement-retained models showed lower principal stress and more even stress distribution than the screw-retained models. 4. The similar stress distribution pattern was showed in model 1 and model 2, model 3 and model 4. 5. The more stress was observed when the loads were applied at the distal end of 1st molar than the center of 2nd premolar. 6 The fixture and the model as a whole, lesser stress values were observed when vertical loads were applied as compared to horizontal and oblique loads.
Kim, Jung-Soo;Sohn, Joo-Yeon;Park, Jung-Chul;Jung, Ui-Won;Kim, Chang-Sung;Lee, Jae-Hoon;Shim, June-Sung;Lee, Keun-Woo;Choi, Seong-Ho
Journal of Periodontal and Implant Science
/
제41권2호
/
pp.86-91
/
2011
Purpose: The aim of this study was to analyze the short-term predictability and reliability of Astra Tech implants according to the demographical distribution of patients and condition of implant sites and location of implants. Methods: Among patients treated with Astra Tech implant (Astra Tech AB) in the Department of Periodontology at the Dental Hospital of Yonsei University of College of Dentisry and K Dental Clinic from May 2004 to March 2009, 195 implants in 98 patients which had been restored more than 6 months ago were reviewed in this study. Following data were reviewed from patient charts and implants success rate was examined: 1) patient type and implant location, 2) bone status at the implant site, 3) diameter and length of the placed implants, 4) presence or absence of bone augmentation and types of the augmentation. Results: The results from this study are as follows: 1) most implants were placed in the molar area, especially 1st molar area of maxilla, 2) most implants were placed at $D_2$ and $D_3$ bone type, 3) most implants were placed in areas of B and C bone quantity, 4) autogenous and alloplastic bone graft and artificial membrane were used for placement of 74 implants. Conclusions: Short-term survival rate of Astra Tech implants was 100%.
The purpose of this study was to analyse the magnitude and distribution of stresses using a Photoelastic model from and distal - extension removable partial dentures With four designed indirect retainers. The designs of the indirect retainers were as follows : Design No. 1 : Aker's clasp on 1st bicuspid with no indirect retainer. Design No. 2 : Aker's clasp on 1st bicuspid with indirect retainer on canine. Design No. 3 : Extension of the reciprocal arm of Aker's clasp toward incisal rest on canine. Design No. 4 : Connection with the indirect retainer as in No. 2 and extension of reciprocal arm of Aker' s clasp. A photoelastic model was made of the epoxy resin(PL - 1) and hardner(PLH - 1) and coated with plastic cement -1(PC -1) at the lingual surface of the epoxy model and set with chrome - cobalt partial dentures. A unilateral vertical load of 10kg to the right 1st molar and a vertical load of 10kg to the middle portion of the metal bar crossing both the 1st molars of the right and left, were applied. With the use of specially designed jig, fixture; loading device and the reflective circular polariscope, we obtained the following results : 1. When the unilateral vertical load and the vertical load of the middle portion of the metal bar were applied, design No. 2, 3 and 4 exhibited the higher stress concentration at the root apices and their surrounding tissues of the primary and secondary abutment teeth. 2. When the unilateral vertical load applied to design No. 2,3 and 4 the root apices of the primary and secondary abutment teeth and their surrounding tissues and the nonloaded side of edentulous area exhibited and even stress distribution. 3. When the vertical load was applied, the stress concentration fringe in the primary and secondary abutment teeth was in the order of No. 1,4,2 and 3. 4. No.1 and 4 exhibited the higher distrorted stress concentration at the primary teeth and the edentulous area in the nonloaded side. 5. No.2 design reduced the stresses at the apices of the alveoli of the primary abutment teeth bilaterally as well as on the crest of the residual ridge on the nonloaded side. 6. No. 2 design exhibited the most favorable stress distribution.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.