• The Korean Journal of Ceramics
• /
• v.5 no.4
• /
• pp.336-340
• /
• 1999

Glasses in the system $CaO-TiO_2-SiO_2-Al_2O_3-ZrO_2-B_2O_3$ were investigated to find the glass seal compositions suitable for use in the planar solid oxide fuel cell (SOFC). Glass-ceramics prepared from the glasses by one-stage heat treatment at $1,000^{\circ}C$ showed various thermal expansion coefficients (i,e., $8.6\times10^{-6^{\circ}}C^{-1}$ to $42.7\times10^{-6^{\circ}}C^{-1}$ in the range 25-$1,000^{\circ}C$) due to the viscoelastic response of glass phase. The average values of contact angles between the zirconia substrate and the glass particles heated at 1,000-$1,200^{\circ}C$ were in the range of $131^{\circ}\pm4^{\circ}$~$137^{\circ}\pm9^{\circ}$, indicating that the glass-ceramic was in partial non-wetting condition with the zirconia substrate. With increasing heat treatment time of glass samples from 0.5 to 24 h at $1,100^{\circ}C$, the DC electrical conductivity of the resultant glass-ceramics decreased from at $800^{\circ}C$. Isothermal hold of the glass sample at $1100^{\circ}C$ for 48h resulted in diffusion of Ca, Si, and Al ions from glass phase into the zirconia substrate through the glass/zirconia bonding interface. Glass phase and diffusion of the moving ion such as $Ca^{2+}$ in glass phase is responsible for the electrical conduction in the glass-ceramics.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.2
• /
• pp.253-258
• /
• 1997

The characteristics of crystal structure and phase transition with dopants ($Nb_2O_5$= 0.1~0.4 mol% and $Y_2O_3$ : 0.2~0.4 mol%) on the PTCR $BaTiO_3$ system were investigated. In the case of $Nb_2O_5$ additive, the lattice parameter of PTCR $BaTiO_3$ was changed linearly with the increasement of $Nb_2O_5$ which substituted B-site of BaTiO$_3$ and the lattice parameter of c-axis decreased abruptly at 0.3 mol%. These phenonmena were assumed to originate from the distortion of octahedron and we could confirm that the change of lattice parameter accorded with the characteristics of the phase transition temperature. $Y^{3+}$ ions substituted both of A- and B-site until the 0.3 mol% addition, but $Y^{3+}$ substitution preferred A- to B-site above 0.3 mol%. This was affirmed by the variation ,of lattice parameter and the characteristics of phase transition. It also was found that $Y^{3+}$ions in the A-site substituted both of $Ba^{2＋}$ and $Ca^{2＋}$ ions with equal ratio by Rietveld method.

• Proceedings of the KAIS Fall Conference
• /
• 2004.06a
• /
• pp.86-88
• /
• 2004

본 연구에서는 고주파 이동통신 기기용 칩형 세라믹 안테나의 사용을 위한 저유전율 및 저온동시소성이 가능한 CaO-B2O3-SiO2계 유리를 제조하고자 하였다. 제조된 CaO-B2O3-SiO2계 유리는 열분석을 통하여 낮은 연화온도를 갖는 안정한 유리조성을 선정하였다. 유리분말을 이용하여 성형된 샘플은 소결온도에 따른 특성을 조사하였다. 소결온도변화에 따라 유전율(${\epsilon}_r$)은 4-4.5값을 나타냈으며, 유전손실(tan$\delta$)은 <$0.1\%$ 보였으나, 품질계수(Q$\times$f)는 큰 변화폭을 보였다.

• Resources Recycling
• /
• v.15 no.2 s.70
• /
• pp.3-9
• /
• 2006

As a basic study on the conversion of molten converter slag to the ordinary portland cement, the effects of $Al_{2}O_{3}$ addition on the interface reaction between solid CaO and molten converter slag has been studied. Alumina added converter slag whose basicity was controlled to 1 and 2 was melted and hold for 30 minutes in MgO crucible at $1500^{\circ}C$. Then sintered CaO pellet heated at the same temperature was dipped into the molten slag and held for 30minutes. After the reaction, the crucible was cooled in air and the specimen was cut off to the horizontal direction of the crucible. The dissolution rate of CaO pellet with the addition of $Al_{2}O_{3}$ was measured by the change of the radius or sintered CaO pellet and the interface layer was observed by SEM/EDX. As a result. At the basicity 2 slag, thickness of created $C_{3}S$ layer increased 3.5 times and quantity of $C_{6}AF_{2}\;or\;C_{4}AF$ phase increase 2 times than baisicy 1 slag.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.4
• /
• pp.639-642
• /
• 2006

This study aimed to identify effective washing and sanitation programs to minimize the contamination of cooked rice by B. cereus. As such, the effectiveness of five sanitizers, including QAC, alcohol, chlorine, CaO, and $H_2O_2$, was evaluated in relation to the survivability of B. cereus spores in cooked rice and resulting sensory properties of the rice. The water-treated cooked rice showed remaining B. cereus spores at 1.09 $log_{10}CFU/g$. In contrast, treatment with the minimum inhibitory concentrations of the sanitizers, such as 200 ppm of QAC, 50% of alcohol, 100 ppm of chlorine, 650 ppm of CaO, and 500 ppm of $H_2O_2$, destroyed all the spores in the cooked rice below a non-detection limit (ND< 0.15 CFU/g). The sensory properties of the sanitizer-treated (1,000 ppm of $H_2O_2$, 100 ppm of chlorine, and 800 ppm of CaO) cooked rice did not differ significantly from those of the water-treated cooked rice. As a result, 500 ppm of $H_2O_2$, 650 ppm of CaO, and 100 ppm of chlorine were found to effectively eliminate B. cereus spores in rice while cooking.

• Advances in materials Research
• /
• v.3 no.4
• /
• pp.227-232
• /
• 2014

$Ce^{4+}$, $Eu^{3+}$, $Tb^{3+}$ co-doped $Ca_3Si_3O_8F_2$ phosphor was synthesized via solid state reaction method using $CaF_2$, $CaCO_3$ and $SiO_2$ as raw materials for the host and $Eu_2O_3$, $CeO_2$, and $Tb_4O_7$ as activators. The luminescent properties of the phosphor was analysed by spectrofluorophotometer at room temperature. The effect of excitation wavelengths on the luminescent properties of the phosphor i.e. under near-ultraviolet (nUV) and visible excitations was investigated. The emission peaks of $Ce^{4+}$, $Eu^{3+}$, $Tb^{3+}$ co-doped $Ca_3Si_3O_8F_2$ phosphor lays at 480(blue band), 550(green band) and 611nm (red band) under 380nm excitation wavelength, attributed to the $Ce^{4+}$ ion, $Tb^{3+}$ ion and $Eu^{3+}$ ions respectively. The results reveal that the phosphor emits white light upon nUV (380nm) / visible (465nm) illumination, and a red light upon 395nm / 535nm illumination. RE ions doped $Ca_3Si_3O_8F_2$ is a promising white light phosphor for LEDs. The emission colours can be seen using Commission international de l'eclairage (CIE) co-ordinates. A single host phosphor emitting different colours under different excitations indicates that it is a potential phosphor having applications in many fields.

• Korean Journal of Crystallography
• /
• v.11 no.4
• /
• pp.231-237
• /
• 2000

CMR Materials RE/sub 1-x/Ca/sub x/MnO₃(RE=La, Nd, A=Ca, Sr) were grown using the floating zone image furnace with halogen lamps as heat source. The growth condition was at 2∼10 mm/hr growth rate in air atmosphere, were 445∼50 rpm and 20∼25 rpm of rotation rate of feedrod and growing crystal, respectively. The grown crystals showed shiny black color and annealed at 1500℃ in a box furnace to release the residual stress during cooling. Characterization analyses of the crystal were carried out using XRD and SEM. The crystal structure of Nd/sub 0.7/Ca/sub 0.3/MnO₃ was analyzed with smart CCD XRD was lattice parameter of a=5.425(4)Å, b=5.434(4)Å, and c=7.712(5)Å, an orthorombic system with space group of pbnm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.259-259
• /
• 2007

The low temperature sintering of dolomite type borates, $CaZr(BO_3)_2$[CZB] ceramics and their microwave dielectric properties were investigated The sintering temperature of CZB ceramics could be reduced from $1150^{\circ}C$ to $925^{\circ}C$ by the addition of sintering additive. $CaZrO_3$, $ZrO_2$ and $CaB_2O_4$ second phases were found in the CZB ceramics. The syntheses, sintering properties, microstructures, and dielectricnproperties of dolomite-type borates were examined by XRD, thermal analysis, electron microscopy, network analyzer, and the results are discussed intensively. The compatibility with silver electrode was also explored.

• Transactions of Materials Processing
• /
• v.15 no.3 s.84
• /
• pp.213-219
• /
• 2006

To improve the strength of glass is being studied in order to contribute to weight saving of flat panel displays. Generally, the strength achieved of glass-ceramics is higher as is the fracture toughness by the formation of a heterogeneous phase inside glass. In this study, Ag-doped $45SiO_2-24CaO-24Na_2O-4P_2O_5\;and\;70SiO_2-10CaO-24Na_2O-10TiO_2$ glasses were irradiated to strengthen by crystallization using femto-second laser pulse. XRD, Nano-indenter and SEM etc., irradiation of laser pulse without heat-treated samples was analyzed. Samples irradiated by laser had higher value($4.4{\sim}4.56^*10-3Pa$) of elastic modulus which related with strength of glass than values heat-treated samples and these are $1.2{\sim}1.5$ times higher values than them of mother glass. This process can be applicable to the strengthening of thinner glass plate, and it has an advantage over traditional heat-treatment and ion-exchange method.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.12
• /
• pp.14-21
• /
• 1997

This study was conducte dto fabricate 2GHz circulator using Ca,Sn substituted UIG(yttrium iron garnet)ceramics. When the electric, magnetic and microwave properties were measured in Ca, Sn substituted YIG, the measured perimittivity and perfmeability in microwave frequencies were 16.25, 0.8964. For $Y_{2.4}$C $a_{0.3}$A $n_{0.3}$F $e_{3.5}$A $l_{1.5}$ $O_{12}$ garnet ceramics sintered at 1400.deg. C, the ferrimagnetic resonance line width (.DELTA.H) at 10GHz was 53 Oe and saturation magnetization was 375G. The strip-line circulator was simulated with 3-D FEM (finite element method) software and designed at the center frequency of 2GHz. The fabricated strip-line junction circulator using above YIG ceramics had insertion loss of 1.271dB, return loss of 23.843dB, isolation of 21.751dB at the center frequency 1.855GHz.z.z.z.z.z.z.