• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2010년도 춘계학술대회
• /
• pp.226-234
• /
• 2010

In this thesis, we present process that remove mistake of data before statistical analysis. If field data which is not simple examination about validity of data, we cannot believe analyzed statistics information. As statistical analysis information is produced based on data to be input in statistical analysis process, the data to be input should be free of error. In this paper, we study the application of statistical analysis road map that can enhance application on site by organizing basic theory and approaching on initial data exploratory phase, essential step before conducting statistical analysis. Therefore, access to statistical analysis can be enhanced and reliability on result of analysis can be secured by conducting correct statistical analysis.

• 전기전자학회논문지
• /
• 제17권3호
• /
• pp.248-253
• /
• 2013

주파수 판별기는 주파수를 디지털 비트 신호로 변환해주는 회로로서 변조기, 동기화 회로 등에 쓰인다. 본 논문에서는 여러 종류의 일차, 이차 주파수 판별기의 구조를 모델링하고 양자화 잡음 성능을 분석하며, 새로운 구조의 델타-시그마 주파수 판별기 구조를 제안한다. 이론적 분석과 유도된 수식으로부터 출구 잡음을 구하고 모의실험으로 타당성을 검증하였다. 제안된 주파수 판별기는 전 디지털 회로로서 전 디지털 위상 잠금 루프의 궤환 경로에 적용될 수 있다.

• 한국세라믹학회지
• /
• 제36권12호
• /
• pp.1335-1341
• /
• 1999

The electrical conductivity ($\sigma$) of TiO2 doped with 0.05-4.0mol% Nb2O5 was measured in the oxygen partial pressure range of 10-17 to 100 atm and temperature range of 1100 to 130$0^{\circ}C$ to investigate the electrical properties and defect types. The oxygen partial pressure dependence of the electrical conductivity (log$\sigma$/logPo2) above 110$0^{\circ}C$ was divided into the four regions. From these experimental results the following defect regions were proposed ; 1) Magneli phase(extended defect) 2) reduced rutile region where intrinsic defect predominates 3) nearly stoichiometric region which is independent on the oxygen partical pressure and 4) overstoichiometric region which is not observed in pure TiO2 The electrical conductivity of Nb-doped TiO2 depended on the doping content the oxygen partial pressure and the measuring tem-perature.

• 한국주조공학회지
• /
• 제9권1호
• /
• pp.58-66
• /
• 1989

The effect of heat treating temperature and ${\alpha}$ phase In the ${\beta}$ phase matrix were investigated for ${\beta}-CuZnAl$ shape memory alloys by tension test, fatigue test, and shape memory effect test. After heat treatment at $677^{\circ}C$, $750^{\circ}C$, $800^{\circ}C$ and $850^{\circ}C$ for 10 min. respectively, static fracture stress(${\sigma}_f$), fatigue fracture stress(${\tau}_{max}$) at $10^6$ cycle, and elongation(${\epsilon}_f$) was $24.2kg/mm^2$, $17.21kg/mm^2$ and 11.8%, respectively. As heat treating temperature decreased, fracture surfaces of the specimens were changed from the intergranular to the transgranular fracture mode. Especially, the a phase precipitated in the ${\beta}$ phase matrix had an effect on crack propagation and the fracture surface was characterized by dimple-like pattern when crack propagated in transgranular cracking mode. Precipitation of the ${\alpha}$ phase in the ${\beta}$ phase matrix lowered the transformation temperature by $10^{\circ}C$, and about 2.5 vol.% ${\alpha}$ phase did not affect the shape memory effect examined by the bending test.

• 대한전자공학회논문지SD
• /
• 제43권10호
• /
• pp.90-96
• /
• 2006

본 논문에서는 capacitance scaling 구조를 이용하여 짧은 locking 시간과 작은 fractional spur를 가지는 ${\Sigma}{\Delta}$ fractional-N PLL을 설계하였다. 루프필터의 실효 커패시턴스를 변화시키기 위하여 여러 개의 전하펌프를 이용해 서로 다른 경로로 커패시터에 전류를 공급하였다. 필터의 실효 커패시턴스는 동작상태에 따라 크기가 변하며 커패시터들은 하나의 PLL 칩에 집적화 할 수 있을 정도로 작은 크기를 가진다. 또한 PLL이 lock 되면 전하펌프 전류의 크기도 작아져 fractional spur의 크기도 작아진다. 제안된 구조는 HSPICE CMOS $0.35{\mu}m$ 공정으로 시뮬레이션 하였으며 $8{\mu}s$ 이하의 locking 시간을 가진다. PLL의 루프필터는 200pF, 17pF의 작은 커패시터와 $2.8k{\Omega}$의 저항으로 설계되었다.

• 품질경영학회지
• /
• 제46권1호
• /
• pp.1-10
• /
• 2018

Purpose: This paper provides an idea on the future prospect for change in steps of the six sigma DMAIC project under the environment of the 4th industrial revolution. Methods: First, the purpose and activities required in each step of DMAIC are reviewed. Next, activities are reviewed together with tools and techniques, considering the purpose and the environmental changes of the 4th Industrial Revolution. Finally, the best approaches for achieving the purpose are prospected to get an idea on future change. Results: The purpose of each phase of DMAIC is expected to remain unchanged. But activities, techniques, or methods will be replaced with more effective and efficient ones. Also, many activities may possibly be executed by a system instead of people like BB, GB or team members. Moreover, DMAIC may not be a project any more but a routine job of the system in the future. Conclusion: Under the environment of the 4th industrial revolution, many activities including analyzing various types of data and extracting valuable information, will be executed by a system with proper algorithms instead of people. And six sigma improvement projects may be intrinsic parts of the system and may not exist as separate projects any more.

• Applied Microscopy
• /
• 제33권3호
• /
• pp.195-204
• /
• 2003

Imaging plate에 기록된 전자회절 자료의 면간 거리 분석과 상동정시 나타나는 오차 요인들을 고찰하고 실험적인 보정방법을 도출하였다. 각각의 회절방향에 대한 radial intensity distribution plot과 실험적으로 도출된 면간 거리 보정식에 의해 전자회절 자료의 디지털 이미지에서 면간 거리 측정오차는 약 0.5%로 낮아짐을 알 수 있었다. Al 표준시료를 이용하여 imaging plate에 기록된 전자회절 자료의 면간 거리 편차 경향을 분석한 후 [001] gibbsite 시편에 동일한 실험적 보정을 수행하여 120분간의 전자빔 조사로부터 형성된 여러 전이 상들에 대한 면간 거리 측정 및 상 동정을 보다 정밀히 수행할 수 있었다. 그 결과, gibbsite로부터 형성된 주요 전이상들은 ${\chi}$-알루미나, ${\gamma}$-알루미나, ${\sigma}$-알루미나로 구성됨을 명확하게 동정할 수 있었다.

• Journal of Welding and Joining
• /
• 제28권4호
• /
• pp.18-25
• /
• 2010

Super-duplex stainless steels (SDSS) have a good balance of mechanical property and corrosion resistance when they consist of approximately equal amount of austenite and ferrite. The SDSS needs to avoid the detrimental phases such as sigma(${\sigma}$), chi(${\chi}$), secondary austenite(${\gamma}2$), chromium carbide & nitride and to maintain the ratio of ferrite & austenite phase as well known. However, the effects of the subsequent weld thermal cycle were seldom experimentally studied on the micro-structural variation of weldment & pitting corrosion property. Therefore, the present study investigated the effect of the subsequent thermal cycle on the change of weld microstructure and pitting corrosion property at $40^{\circ}C$. The thermal history of root side was measured experimentally and the change of microstructure of weld root & the weight loss by pitting corrosion test were observed as a function of the thermal cycle of each weld layer. The ferrite contents of root weld were reduced with the subsequent weld thermal cycles. The pitting corrosion was occurred in the weld root region in case of the all pitted specimen & in the middle weld layer in some cases. And the weight loss by pitting corrosion was increased in proportional to the time exposed at high temperature of the root weld and also by the decrease of ferrite content. The subsequent weld thermal cycles destroy the phase balance of ferrite & austenite at the root weld. Conclusively, It is thought that as the more subsequent welds were added, the more the phase balance of ferrite & austenite was deviated from equality, therefore the pitting corrosion property was deteriorated by galvanic effect of the two phases and the increase of 2nd phases & grain boundary energy.

• 한국광학회지
• /
• 제4권1호
• /
• pp.28-35
• /
• 1993

수차가 정확히 알려지지 않은 결상계에 있어서, exit pupil에 인위적인 위상의 random fluctuation을 도입하고 북스펙트럼 스펙클 영상법(bispectral speckle imaging)을 이용하므로서 수차의 효과를 극소화하여 거의 회절한계의 영상을 얻을 수 있다. Defocus, 구면수차, 코마수차, 비점수차가 각각 1파장씩 있을 때, 주어진 사용영상수(50개)에 대해서 Gaussian random phase model의 correlation length가 어느 정도일 때 최적의 결과를 얻을 수 있는지를 점 물체에 대해 컴퓨터 시뮬레이션을 시행하므로서 연구하였다. 평가기준으로서는 복원된 점물체에 대한 point spread function의 FWHM, normalized peak intensity, MTF 그리고 visual inspection을 채용하였는데, exit pupil 위에서 Fried parameter ${\Upsilon}_0$ 범위에 대한 수차의 차의 rms값 $\sigma$가 구면수차에 대해서는 0.27~0.53 파장일 때, defocus와 비점수차에 대해서는 0.24~0.36 파장일 때, 좋은 결과를 주는 것으로 나타났고, 코마수차의 경우에는 좋은 결과를 얻을 수 없었다.

• 한국세라믹학회지
• /
• 제31권10호
• /
• pp.1169-1175
• /
• 1994

Five Al2O3/SiC/metal composites with four different particle sizes of green SiC abrasive grains are grown by the directed oxidation of an commercially available Al-alloy. Oxidation was conducted in air at 100$0^{\circ}C$, 96 hours long. Slip casted SiC-fillers were placed on the alloy or SiC powder deposited up to the required layer thickness. Their microstructures are described and measurements of density, elastic constants, frexural strength, fracture toughness and work of fracture are reported. The results are compared with those of commercial dense sintered Al2O3. The properties of produced materials have a strong relationship to not only the properties of Al2O3, SiC, Al and Si but also to the phase share and phase distribution. The composite materials are dense (0.5% porosity), tough (KIC = 3.4~6.4 MPa{{{{ SQRT { m} }}), strong ({{{{ sigma }}B = 170~345 MPa) and reasonably shrinkage free producible. The reinforcements is attained mainly through the plastic deformation of ductile metal phase.