• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.191-191
• /
• 2011

최근 투명전극 연구는 태양전지 및 디스플레이, LED 등 많은 분야에서 응용되며 또한 기술 개발이 활발하다. 그 중 전기 전도도가 우수하면서 밴드갭이 2.5 eV 이상으로 가시광 영역에서 투명하기 때문에 디스플레이의 투명전극으로 ITO (Indium Tin Oxide)가 많이 사용되고 있다. 본 실험에서는 RF magnetron sputtering법을 이용한 ITO의 증착시 산소 유량을 달리하여 제작한 박막의 Energy Band Structure를 ${\gamma}$-FIB system을 이용하여 측정하였다. ITO에 이온화 에너지가 24.5 eV인 He Ion source를 주사하였을 때 Auger self-convolution을 통해 이차전자의 운동 에너지 분포를 구하고, 이를 통해 ITO 내의 Energy Band Structure를 실험적으로 측정하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1380-1383
• /
• 2007

The secondary electron emission coefficient (${\gamma}$) of the cathode is an important factor for improving the discharge characteristics of AC-PDP, because of its close relationship to discharge voltage. In this experiment, we have investigated the electronic structure of the energy band in the MgO layer responsible for the high ${\gamma}$. We used three kinds of MgO pellet that have another component, and each MgO layers have been deposited by electron beam evaporation method. The work-functions of MgO layer have been investigated from their ion-induced secondary electron emission coefficient (${\gamma}$), respectively, using various ions with different ionization energies in a ${\gamma}-FIB$ (Focused Ion Beam) system. We have compared work-function with ${\gamma}-FIB$ system current signal for measurement defect energy level in MgO layer. MgO-A in the three types has lowest work-function value (4.12eV) and there are two defect energy levels.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.3
• /
• pp.259-263
• /
• 2005

The changes in secondary electron emission coefficient(${\gamma}$) and work function($\Phi$$_{\omega}$) have been studied on the surface of MgO protective layer aster plasma(Ar. $O_2$) treatment using ${\gamma}$-focused ion beam (${\gamma}$-FIB) system. The values of ${\gamma}$ varied as follows: $O_2$-treated MgO > Ar-treated MgO > Non-treated MgO, and the work functions varied in the reverse order. The result indicates that both the physical etching and the chemical reaction of $O_2$-plasma removed the contaminating materials from the surface of MgO.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2005.02a
• /
• pp.91-91
• /
• 2005

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.420-420
• /
• 2010

AC PDP에서 유전체 보호막으로 사용되는 MgO 박막은 높은 이차전자방출계수($\gamma$)로 인해 방전전압을 낮춰주는 중요한 역할을 하고 있다. 이러한 MgO 보호막의 이차전자방출계수를 증가시키기 위해 MgO 의 Energy Band Structure 규명이 중요한 연구 주제가 되고 있다. MgO의 이차전자방출계수($\gamma$)는 Auger 중화 이론에 의해 방출 메커니즘이 설명이 되고, 그 원리는 다음과 같다. 고유의 이온화 에너지를 가진 이온이 MgO 표면에 입사 되면, Tunneling Effect에 의해 전자와 이온 사이에 중화가 일어나고, 중화가 되고 남은 에너지가 MgO Valance Band 내의 전자에게 전달되면 이때 남은 에너지(${\Delta}E$)가 MgO의 일함수(Work function) 보다 크게 되면 이차전자로 방출된다. 본 실험 에서는 $\gamma$-FIB System을 이용하여 결정 방향이 (100), (110), (111)을 갖는 Single Crystal MgO에 이온화 에너지가 24.58eV인 He Ion source를 주사 하였을 때 Auger self-convolution을 통해 이차전자의 운동 에너지 분포를 구하고, 이를 통해 MgO 내의 Energy Band Structure를 실험적으로 측정하였다. 이를 통해 MgO Single Crystal의 일함수 및 Defect Level의 분포를 확인하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2009.08a
• /
• pp.401-401
• /
• 2009

• Journal of the Korean Vacuum Society
• /
• v.12 no.1
• /
• pp.16-19
• /
• 2003

Ni thin films on the p-InP (In) substrates were grown at room temperature by using the ion beam-assisted deposition. In order to determine the work function of the Ni thin films, the $\gamma$values were measured as functions of the acceleration voltages by using Ne, Ar, $N_2$. and Xe ion sources. The dependences of the values on various gases and on the acceleration voltages of the focused ion beam were obtained to determine the work function of the Ni thin films. The value of the work function of the Ni thin films grown on the p-InP (100) substrate was 5.8 eV ~ 5.85 eV. These results provide important information on the electronic properties of Ni thin films grown on p-InP (100) substrates at room temperature.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.802-805
• /
• 2003

The ion-induced secondary electron emission coefficient ${\gamma}$ for MgO thin film with $O_{2}$ plasma treatment has been investigated by ${\gamma}$-FIB (focused ion beam) system. The MgO thin film deposited from sintered material with $O_2$ plasma treatment is found to have higher ${\gamma}$ than that without $O_{2}$ plasma treatment. The energy of $Ne^{+}$ ions used has been ranged from 100eV to 200eV throughout this experiment. It is found that the highest secondary electron emission coefficient ${\gamma}$ has been achieved for 10 minutes of $O_{2}$ plasma treatment.

• Journal of the Korean Vacuum Society
• /
• v.15 no.4
• /
• pp.395-403
• /
• 2006

It is known that $MgAl_2O_4$ has higher resistance to moisture than MgO, in humid ambient MgO is chemically unstable. It reacts very easily with moisture in the air. In this study, the characteristic of $MgAl_2O_4$ and $MgAl_2O_4/MgO$ layers as dielectric protection layers for AC- PDP (Plasma Display Panel) have been investigated and analysed in comparison for conventional MgO layers. MgO and $MgAl_2O_4$ films both with a thickness of $1000\AA$ and $MgAl_2O_4/MgO$ film with a thickness of $200/800\AA$ were grown on the Cu substrates using the electron beam evaporation. $1000\AA$ thick aluminium layers were deposited on the protective layers in order to avoid the charging effect of $Ga^+$ ion beam while the focused ion beam(FIB) is being used. We obtained sputtering yieds for the MgO, $MgAl_2O_4$ and $MgAl_2O_4/MgO$ films using the FIB system. $MgAl_2O_4/MgO$ protective layers have been found th show $24{\sim}30%$ lower sputtering yield values from 0.244 up to 0.357 than MgO layers with the values from 0.364 up to 0.449 for irradiated $Ga^+$ ion beam with energies ranged from 10 kV to 14 kV. And $MgAl_2O_4$ layers have been found to show lowest sputtering yield values from 0.88 up to 0.109. Secondary electron emission coefficient(g) using the ${\gamma}$- FIB. $MgAl_2O_4/MgO$ and MgO have been found to have similar g values from 0.09 up to 0.12 for indicated $Ne^+$ ion with energies ranged from 50 V to 200 V. Observed images for the surfaces of MgO and $MgAl_2O_4/MgO$ protective layers, after discharge degradation process for 72 hours by SEM and AFM. It is found that $MgAl_2O_4/MgO$ protective layer has superior hardness and degradation resistance properties to MgO protective layer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.400-403
• /
• 2008

We have investigated the electro-optical characteristics of AC-PDP with different MgO protective layers, which have been deposited by electron beam evaporation from various sintered pellets with different temperatures. We have measured the secondary electron emission coefficient ($\gamma$) by using the Gamma Focused Ion Beam ($\gamma$-FIB) system, the static margin, and the address delay time. Also, we have investigated photoluminescence (PL) characteristics for understanding the energy levels of MgO pellets and protective layers.