• Journal of Korea Multimedia Society
• /
• 제3권2호
• /
• pp.184-191
• /
• 2000

In thid paper, we have analized the characteristics of $\Delta$-shaped filter based on preceeding study. The algorithm of $\Delta$-shaped filter for full screen display has been discussed including their edge-preserving characteristics and computaion complexity compared with the conventional algorithms. PSNR has been employed to compare the proposed method to the conventional algorithms. The proposed algorithm has been implemented using Synopsys VHDL tool. In addition, the features and trade off of the $\Delta$-shaped filter have been discussed.

• Membrane Journal
• /
• 제8권3호
• /
• pp.157-169
• /
• 1998

The effects of solvents (DMAc, NMP, 1,4-dioxane) and nonsolvents ($H_2O$, Methanol, n-hexane) on the morphology of 6FDA-p-TeMPD polyimide membrane, prepared by the wet phase inversion method, were studied. In the polymer/solvent/nonsolvent ternary system, the binodal curve, the coagulation value and the relative light transmission were measured, and the solubility parameter difference was calculated. The onset state and rate of liquid-liquid alemixing were predicted and the morphology of membrane was analyzed. It is found that the finger-like pores are formed within discontinuous polymer nodules when the binoclal curve is close to the polymer-solvent (P-S) axis, the coagulation value is small, the reduction of light transmission is easy to occur and the order of solubility parameter difference ($\Delta \delta_{i-j}$) is $\Delta \delta_{S-NS} > \Delta \delta_{P-NS} > \Delta \delta_{P-S}$. The dense skin with small nodules and the sponge type sublayer with macrovoid are formed in the case that the binodal curve is distant from the P-S axis, the onset time of liquid-liquid demixing is long and the order of $\Delta \delta_{i-j}$ is $\Delta \delta_{P-NS} >(\Delta \delta_{S-NS} < > \Delta \delta_{P-S})$. The thick layer of fine nodule coagulation and loosely grown sublayer of nodules appear when the binodal curve is distant from the P-S axis, the onset time of liquid-liquid demixing is very long and the order of $\Delta \delta_{i-j}$가 $\Delta \delta_{S-NS} > (\Delta \delta_{P-NS}$\lessgtr$ > (\Delta \delta_{P-NS} < >)\Delta \delta_{P-S}$ ).

• Phonetics and Speech Sciences
• /
• 제7권1호
• /
• pp.3-10
• /
• 2015

In this paper, different frequency scales in cepstral feature extraction are evaluated for the text-independent speaker recognition. To this end, mel-frequency cepstral coefficients (MFCCs), linear frequency cepstral coefficients (LFCCs), and bilinear warped frequency cepstral coefficients (BWFCCs) are applied to the speaker recognition experiment. In addition, the spectro-temporal features extracted by the cepstral-time matrix (CTM) are examined as an alternative to the delta and delta-delta features. Experiments on the NIST speaker recognition evaluation (SRE) 2004 task are carried out using the Gaussian mixture model-universal background model (GMM-UBM) method and the joint factor analysis (JFA) method, both based on the ALIZE 3.0 toolkit. Experimental results using both the methods show that BWFCC with appropriate warping factor yields better performance than MFCC and LFCC. It is also shown that the feature set including the spectro-temporal information based on the CTM outperforms the conventional feature set including the delta and delta-delta features.

• Magazine of the Korea Concrete Institute
• /
• 제7권1호
• /
• pp.156-164
• /
• 1995

P-${\Delta}$ analysis by use of the equivalent colurnn stiffness determined by Momcnt curvature-Thrust curves provides relatively precise analytical results for unbraced reinforced concrete columns, however it needs a complicated arialytical procedure. Equ~valent col~rnn stiffness equations are proposed for a simple analytical procedure which are ckterrnined by the Moment-Curvature Thrust curves of the practically useable sections. Thc proposed stiffness equations are appiled to P-${\Delta}$ analysis and rnornent magnifier method to compare with the selected test result. Use of the proposed stiffness equations may slrnplify the P-${\Delta}$ i.rialvtica1 procedure and improve the accuracy of moment magnifier niethod.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권2호
• /
• pp.186-196
• /
• 2017

In order to resolve the trimming difficulty in rotor CFD calculations, a high-efficiency and improved "delta trim method" is established to compute the blade control settings that are necessary to identify the blade motion. In this method, a simplified model which combines the blade element theory and different inflow models is employed to calculate the control settings according to the target aerodynamic forces, then it is coupled into a CFD solver with unsteady Navier-Stokes equations by the delta methodology, which makes the control settings and aerodynamics calculated and updated in the meantime at every trim cycle. Different from the previous work, the current research combines the inflow model based on prescribed wake theory. Using the method established, the control settings and aerodynamic characteristics of Helishape 7A, AH-1G and Caradonna-Tung rotors are calculated. The influence of different inflow models on trimming calculations is analyzed and the computational efficiency of the current "delta trim method" is compared with that of the "CFD-based trim method". Furthermore, for the sake of improving the calculation efficiency, a novel acceleration factor method is introduced to accelerate the trimming process. From the numerical cases, it is demonstrated that the current "delta trim method" has higher computational efficiency than "CFD-based trim method" in both hover and forward flight, and up to 70% of the amount of calculation can be saved by current "delta trim method" which turns out to be satisfactory for engineering applications. In addition, the proposed acceleration factor shows a good ability to accelerate the trim procedure, and the prescribed wake inflow model is always of better stability than other simple inflow models whether the acceleration factor is utilized in trimming calculations.

• Journal of the Korean Chemical Society
• /
• 제25권3호
• /
• pp.152-159
• /
• 1981

The rates of solvolysis for p-nitrobenzyl chloride have been measured by the electric conductivity method in aqueous ethanol from 0.0 to 0. 5 mole fraction of ethanol under various pressures up to 1200bar at 50 and $60{\circ}C$. The activation parameters, ${\Delta}V_\0^{\neq},\ {\Delta}H^{\neq}$ and ${\Delta}S^{\neq}$ are evaluated from the rate constants. The results indicated that ${\Delta}V_\0^{\neq}$ exhibits an extremum behaviors near 0.3 mole fraction of ethanol and ${\Delta}H^{\neq}$ and ${\Delta}S^{\neq}$ near 0.1 mole fraction of ethanol. This behaviors are discussed in terms of solvent structure variation and the pressure dependences of ${\Delta}H^{\neq},\ {\Delta}H^{\neq}$ and ${\Delta}S^{\neq}$ are also discussed individually. The signs of the pressure dependence of ${\Delta}H^{\neq}$${\Delta}S^{\neq}$ are shown to be consistent with those required by the Maxwell relationships for classical thermodynamic systems.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 한국추진공학회 1996년도 제6회 학술강연회논문집
• /
• pp.209-216
• /
• 1996

The shape variation of billet was investigated by numerical method and spray forming work with variation of average substrate withdrawal velocity$\bar{V}$, withdrawal velocity change interval $\Delta$t and velocity deviation from average velocity $V_{dev}$. The shape and diameter with large$\bar{V}$, $\Delta$t, $V_{dev}$ vary seriously. When $\bar{V}$, $\Delta$t, $V_{dev}$ are smaller, the shape of billet is more simillar to that of the billet with constant withdrawal velocity. The average diameter of billet is determined by only $\bar{V}$, independent of $\Delta$t, $V_{dev}$. With $\bar{V}$, : 0.2 mm/sec $\Delta$t: 200 sec and $V_{dev}$. : 0.2mm/sec billet of constant diameter 230mm$\times$ height 1000mm were manufactured.

• Journal of the Korean Chemical Society
• /
• 제36권6호
• /
• pp.818-823
• /
• 1992

2-Ethylhexanoate compounds which contained Y, Er, Yb, Ba, and Cu were prepared separately. These metallo-organic compounds were dissolved together in the common solvent and the solution was homogeneous. From these solution, high $T_c$ superconductors $YBa_2Cu_3O_{7-\delta}(Y_{123})$, $ErBa_2Cu_3O_{7-\delta}(Er_{123})$, and $YbBa_2Cu_3O_{7-\delta}(Yb_{123})$ were prepared. XRD analysis showed that these superconductors were not single phase and contained some impurity phases including $YBa_2Cu_4O_8(Y_{124})$. This was also confirmed from the magnetic susceptibility measurement. Generally, critical temperatures were higher than that of the superconductors prepared by ceramic method. Volume diamagnetic susceptibility showed little variation compared to the specimen made by ceramic method.

• Journal of Mechanical Science and Technology
• /
• 제18권6호
• /
• pp.961-971
• /
• 2004

Methods for determination of the crack opening stress intensity factor ($K_{op}$) and for estimation of the effective stress intensity factor range ($\Delta{K}_{eff}$) are evaluated for crack growth test data of aluminum alloys. Three methods of determining $K_{op}$, visual measurement, ASTM offset compliance method, and the neural network method proposed by Kang and Song, and three methods of estimating $\Delta{K}_{eff}$, conventional, the 2/PIO and 2/PI methods proposed by Donald and Paris, are compared in a quantitative manner by using evaluation criteria. For all $K_{op}$ determination methods discussed, the 2/PI method of estimating $\Delta{K}_{eff}$ provides good results. The neural network method of determining $K_{op}$ provides good correlation of crack growth data. It is recommended to use 2/PI estimation with the neural $K_{op}$ determination method. The ASTM offset method used in conjunction with 2/PI estimation shows a possibility of successful application. It is desired to improve the ASTM method.

• Journal of Korean Ophthalmic Optics Society
• /
• 제12권4호
• /
• pp.91-94
• /
• 2007

This research was investigated to find out the examinees' refractive problems within heterophoria using Torrington method. The number of subjects ware approximately 327 and subjects were sourced from the 12th grade student at high school in Kwang-Ju city. Result obtained shows 21.4% of emmetropia and 78.6% of ametropia. Most of refractive errors were myopia and due to it's condition, frequency of ametropia and emmetropia at the similar rate. However, one that consist of refractive problems, it's myopia contains 74.9% of heterophoria. Due to emmetropia, horizontal heterophoria have 45.7% of exophoria and 4.3% of esophoria. Myopia shows 11.4% of esophoria and 63.5% of exophoria. Hozizonda heterophoria shows 5.7% of emmetropia and myopia of 22.4%, than average of esophoria shows $4.3P{\Delta}$ and case of myopia, it was $3.4P{\Delta}$. Case of Exphoria, emmetropia have $8.8P{\Delta}$ and within myopia $8.0P{\Delta}$. Vertical heterophoria owns $2.2P{\Delta}$ within emmetropia and case of myopia $4.3P{\Delta}$ was shown. Which shows myopia result value higher than emmetropia.