• 전력전자학회논문지
• /
• 제14권1호
• /
• pp.1-7
• /
• 2009

삼상 계통 연계 인버터에서 LCL 필터를 연결시키는 두 가지 방법이 존재한다. 하나는 일반적으로 사용하는 Y-결선 LCL 필터가 있고 다른 형태로 $\Delta$-결선 LCL 필터가 있다. Y-결선 LCL 필터를 사용하는 시스템의 모델은 계산되어 있는 반면에, $\Delta$-결선 LCL 필터를 사용하는 시스템의 모델은 공식화되어져 있지 않다. 그리하여 $\Delta$-결선 LCL 필터를 사용하는 시스템의 수학적인 모델을 제안한다. 또한 Y-결선 LCL 필터와 $\Delta$-결선 LCL 필터 각각의 커패시터에 흐르는 전류 고조파에 대한 비교를 포함한다. $\Delta$-결선 LCL 필터를 사용하는 시스템이 계통전류를 제어하는데 더 유리함을 실험을 통해 입증한다.

• East Asian mathematical journal
• /
• 제23권2호
• /
• pp.159-174
• /
• 2007

In this paper, the concepts of pairwise fuzzy $G_{\delta}$-connected spaces and pairwise fuzzy $G_{\delta}$-extremally disconnected spaces are introduced. The concept of pairwise fuzzy $G_{\delta}$-basically disconnected spaces is defined. Characterizations of the above spaces are given besides giving several examples. Interrelations among the spaces introduced are discussed and some relevant counter examples are given.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권10호
• /
• pp.1231-1238
• /
• 1999

This paper presents an approach for the optimal heating load Identification using Diagonal Recurrent Neural Networks(DRNN). In this paper, the DRNN captures the dynamic nature of a system and since it is not fully connected, training is much faster than a fully connected recurrent neural network. The architecture of DRNN is a modified model of the fully connected recurrent neural network with one hidden layer. The hidden layer is comprised of self-recurrent neurons, each feeding its output only into itself. In this study, A dynamic backpropagation (DBP) with delta-bar-delta learning method is used to train an optimal heating load identifier. Delta-bar-delta learning method is an empirical method to adapt the learning rate gradually during the training period in order to improve accuracy in a short time. The simulation results based on experimental data show that the proposed model is superior to the other methods in most cases, in regard of not only learning speed but also identification accuracy.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.550-558
• /
• 2018

This paper presents the current limit strategy of voltage controller of delta-connected H-bridge static synchronous compensator (STATCOM) under an unbalanced voltage fault event. When phase to ground fault happens, the feasibility to heighten the magnitude of sagging phase voltage is considered by using symmetric transformation method in delta-structure STATCOM. And the efficiency to cover the maximum physical current limit of switching device is considered by using vector analysis method that calculate the zero sequence current for balancing the cluster energy in delta connected H-bridge STATCOM. The result is simple and obvious. Only positive sequence current has to be used to support the unbalanced voltage sag. Although the relationship between combination of the negative sequence voltage with current and zero sequence current is nonlinear, the more negative sequence current is supplying, the larger zero sequence current is required. From the full-model STATCOM system simulation, zero sequence current demand is identified according to a ratio of positive and negative sequence compensating current. When only positive sequence current support voltage sag, the least zero sequence current is needed.

• Journal of Power Electronics
• /
• 제11권6호
• /
• pp.824-836
• /
• 2011

A new fault-tolerant control topology for open-loop motor-drive systems with Delta-connected stator windings is introduced in this paper. This new control topology enables the operation of a three-phase induction machine as a two-phase machine fed by a three-phase inverter upon a failure in one of the motor phases. This topology utilizes the "open-Delta" configuration to independently control the current in each of the two remaining healthy phases. This new control technique leads to the alleviation of any torque pulsations resulting from the consequences of the asymmetrical conditions associated with this class of faults.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.9-12
• /
• 2008

Mathematical singularities of circuit equations with three-phase ideal transformer connections are studied. Three-wired wye-wye connections, delta-delta connections, and primary four-wired wye-delta connections are singular. The matrices of their circuit equations have zeros in their eigenvalues. Three-wired wye-delta connections, wye-wye-delta connections, and primary four-wired wye-wye connections are not singular. The physical meaning of their singularities is that they are sensitive and prone to be ill-conditioned. Equivalent shunt admittances representing ion losses and magnetizing inductances make the singular matrices non-singular in wye-connected circuits. And, equivalent series impedances representing copper losses and leakage inductances make the singular matrices non-singular in delta-connected circuits. The tableau analysis is used for the study.

• Journal of Power Electronics
• /
• 제8권3호
• /
• pp.259-267
• /
• 2008

Power quality improvement in a three-phase four-wire system is achieved using a new topology of DSTATCOM (distribution static compensator) consisting of a star/delta transformer with a tertiary winding and a three-leg VSC (voltage source converter). This new topology of DSTATCOM is proposed for power factor correction or voltage regulation along with harmonic elimination, load balancing and neutral current compensation. A tertiary winding is introduced in each phase for a delta connected secondary in addition to the star-star windings and this delta connected winding is responsible for neutral current compensation. The dynamic performance of the proposed DSTATCOM system is demonstrated using MATLAB with its Simulink and Power System Blockset (PSB) toolboxes under varying loads. The capacitor supported DC bus of the DSTATCOM is regulated to the reference voltage under varying loads.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2003년도 Proceeding
• /
• pp.84-87
• /
• 2003

This paper proposes the enhanced REF network, which arbitrates learning rate and momentum dynamically by using the fuzzy system, to arbitrate the connected weight effectively between the middle layer of REF network and the output layer of REF network. ART2 is applied to as the learning structure between the input layer and the middle layer and the proposed auto-turning method of arbitrating the learning rate as the method of arbitrating the connected weight between the middle layer and the output layer. The enhancement of proposed method in terms of learning speed and convergence is verified as a result of comparing it with the conventional delta-bar-delta algorithm and the REF network on the basis of the ART2 to evaluate the efficiency of learning of the proposed method.

• 호남수학학술지
• /
• 제43권1호
• /
• pp.123-129
• /
• 2021

Two new concepts, namely, ��∗-connectedness and ��∗-component are introduced by using ideal in proximity spaces. A relation of ��∗-connectedness with different types of connectedness that are considered in literature before is studied. It is shown that ��∗-connectedness is a contractive property.

• Journal of Electrical Engineering and Technology
• /
• 제11권1호
• /
• pp.109-116
• /
• 2016

This paper proposes an analytic model for four-switch inverter (FSI)-driven wye (Y) or delta (Δ)-connected motors with a current ripple reduction algorithm. FSIs employ four switches in controlling three-phase load instead of using six switches. They have split dc-link stage, and due to this inherent structure there exists the voltage difference between upper and lower capacitors, which results in distortion of the inverter output voltage. To study characteristics of FSIs, this paper presents an advanced simulation models of FSI-driven control system for 3-phase motor that can has a wire connection either Y or Δ. In addition, this paper introduces a current ripple reduction scheme that mitigates degradation of control performance due to the voltage difference between the dc-link capacitors. The validity of the proposed method and the analytic model is verified by simulations and experiments carried out with 1-HP induction machine with Y or Δ-connection