• Journal of Korean Society of Steel Construction
• /
• v.15 no.4 s.65
• /
• pp.389-401
• /
• 2003

The purpose of this study is to develop an algorithm, which can be designed the optimal sections of the composite framed structures constituted with the beams and the columns consisted of H type of steel section and concrete considering the reliability index. The optimized problem or the composite framed structures is formulated with the objective function and the constraints taking the section sizes as the design variables. The objective functions are constituted by the total costs of constructions. Also, the constraints are derived by considering the reliability index of section stress and allowable stress. The algorithm optimized the section of the composite framed structures utilizes the SUMT method using the modified Newton-Raphson direction method. The optimizing algorithm developed in this study is applied to the numerical examples with respecting a one-bay, one-story composite framed structure and a one-bay five-story one for the practical utilization of design on the composite framed structures using the reliability indices$({\beta})$ three and zero. In addition, their numerical results are compared and analyzed to examine the possibility of optimization the applicability, and the convergence this algorithm.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.62-62
• /
• 2003

Landsat TM 영상을 이용, 명암차가 높은 산악 지역에 적용해왔던 알고리즘을 개선하여 비교적 명암차가 낮고 넓게 분포하는 충적층 지역의 선구조를 추출하는 알고리즘을 개발하였다. 수치지형모델(OEM)에 대하여 Local Enhancement 를 이용해서 평탄한 지역을 선정하여 이로부터 충적층을 추출하였다. Zevenbergen & Thorno's Method를 3×3 moving windowing을 통해서 최대 경사방향과 경사를 구해서 충적층을 지나는 선구조 요소를 추출하고 다시 Hough 변환을 이용해서 1차 선구조를 추출하였다 이를 이용하여 충적층의 직각방향의 지형단면의 경사를 유추해서 spline 보간법을 이용해 단면의 최저점을 구하고 이 구해진 점들을 다시 Hough 변환을 이용해서 최종 선구조를 추출하였다. 본 연구에서 사용한 알고리즘은 기존 알고리즘에서 사용된 소창문보다 훨씬 큰 충적층이 분포하는 지역의 지형 경사가 수렴하는 부분에 선구조가 뚜렷이 나타남을 볼 수 있다. 최대경사방향과 경사를 구해서 얻어진 1 차선구조와 최종 선구조에서 선구조 방향이 다소 차이를 보인다. 1 차 선구조의 수직방향 지형단면의 자료를 이용함에 있어, 지형 단면의 시작정과 끝지점을 임의적으로 결정하는 것이 아니라, 충적층을 가로질러 최고점까지 또는 다음 충적층이 나을 때까지의 자료를 이용해서 보간법을 사용하였고, 충적층의 넓이에 따라 보간할 자료량의 차이에 의한 오차가 발생할 수 있다. 넓은 충적층에서 선구조가 잘 추출되는 반면에 좁은 충적층이 분포하거나 계곡에 해당하는 지역에l서는 경사수렴부와 일치하지 않는 선구조가 추출되었다. 이는 향후 계속적으로 연구해서 보완되어야 할 것으로 사료된다.페클 잡영 제거 정도에 있어 다른 필터들과 큰 차이가 없지만 경계선보존지수는 다른 필터들에 비하여 가장 우수함을 확인할 수 있었다.rbon 탐식효율을 조사한 결과 B, D 및 E 분획에서 유의적인 효과를 나타내었다. 이상의 결과를 종합해볼 때, ${\beta}$-glucan은 고용량일 때 직접적으로 또는 $IFN-{\gamma}$ 존재시에는 저용량에서도 복강 큰 포식세로를 활성화시킬 뿐 아니라, 탐식효율도 높임으로써 면역기능을 증진 시키는 것으로 나타났고, 그 효과는 crude ${\beta}$-glucan의 추출조건에 따라 달라지는 것을 알 수 있었다.eveloped. Design concepts and control methods of a new crane will be introduced in this paper.and momentum balance was applied to the fluid field of bundle. while the movement of′ individual material was taken into account. The constitutive model relating the surface force and the deformation of bundle was introduced by considering a representative prodedure that stands for the bundle movement. Then a fundamental equations system could be simplified considering a steady state of the process. On the basi

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.9
• /
• pp.21-28
• /
• 2018

In this study, a standard consolidation test (Oedometer) was performed on the relative density of sand in the south coast to evaluate long-term creep settlement characteristics. Experimental results show that the cumulative settlement at the final loading stage decreases as the relative density increases and the variation of the void ratio decreases. As a result of analyzing the settlement rate of long-term creep of sand, creep settlement of 4.7~11.0% occurred depending on relative density with respect to total settlement. The creep parameter, Beta, of Schmertmann et al. (1978) was estimated to be 0.17~0.40 (average 0.21), and it tended to converge to a certain value when the load step becomes more than a certain level. It was found that there is no significant difference in the creep parameter depending on the layer thickness, and it was confirmed that the creep parameter could be applied regardless of the field layer thickness.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1563-1570
• /
• 2015

Conformational change during chain propagation of alanine oligomer was investigated by quantum chemical calculation(QCC) using 2~5mers(${\times}=2{\sim}5$) models. For estimation of the end group effects, two types of end group. "amide type" ($CH_3CONH-and-CONHCH_3$) and "methyl type" ($CH_3CONH-and-CONHCH_3$), were prepared as both ends(N-and-C). Conformers optimized for 5-mer converged to three types of ${\Phi}/{\Psi}$ : ${\alpha}$-helix(g+/g+, or g-/g-), PPII-like(extended helix-like, g+/g-, or g-/g+), and ${\beta}$-extended (t+/t-, or t-/t+), in the order of lower energy, and the energies of left- and right- handed conformers were the same (5-mer. amide type ${\Delta}E=-1.05$, right type ${\Delta}E=-1.62$). Energies of the monomer unit(${\Delta}E$) of ${\alpha}$-helix decreased with increases of monomer.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.2
• /
• pp.5-9
• /
• 2000

The visual evoked potential was electrophysiological method for the identify of the EEG response on visual cortex. This test was objective test method on the eye function. This study was used the visual evoked potential for the objective color test. The subjects was a normal color function in Korean adults. The test condition was performed on the differens distance and illumination. According to convergence condition of color vision target. On the appearance of EEG wave of visual stimulation on visual cortex. The most EEG wave style was delta wave, and the next amount wave form was beta wave and theta wave, and the least EEG wave form was alpha wave. The histogram of amplitude of EEG wave form was almost non-Gaussian shape, and the phase diagram of amplitude was almost all linear shape. On the kinds of color vision target, the frequency of EEG wave style appeared a similar results.

• Food Science and Preservation
• /
• v.22 no.4
• /
• pp.512-519
• /
• 2015

In this study, the effects of gamma-radiation treatment on cell wall composition and physiological characteristics of astringent persimmon fruit were investigated. The soluble tannin contents of gamma-radiated samples were reduced by the radiation treatment. The hardness of the radiated fruit was decreased when compared to non-radiated fruit. Alcohol-insoluble component of the cell wall in the radiated fruit was decreased from 39.3 mg/g to 37.2 mg/g. The water-soluble content of the radiated fruit was increased from 11.4 mg/g to 13.9 mg/g. The cell wall content of the non-radiated fruit was 26.6 mg/g whereas the cell wall content of radiated fruit was decreased to 23.1 mg/g. Due to the maturation of astringent persimmon fruit by gamma-radiation, water-soluble compounds were increased whereas decreasing in cell wall compounds. The contents of lignin, pectin, and cell wall were decreased from 0.82 mg/g and 3.56 mg/g to 0.77 mg/g and 3.14 mg/g, respectively. Acid-soluble hemicellulose content was decreased by gamma-radiation, while alkali-soluble hemicellulose and cellulose contents were increased. Activities of sotening enzyme as polygalacturonase, pectinesterase and $\beta$-galactosidase existed in persimmon fruit were increased by gamma-radiation. In the sensory evaluation, gamma-radition treated persimmon showed very low astringent taste when compared to the non-radiated fruit. In hardness test, the non-radiated persimmon maintained the hardness while gamma-treated persimmon showed softened outer layer due to the condensation of tannin during radiation treatment. Therefore, gamma-radiation treatment will be used for the removal of its astringency of persimmon fruit and for enhancement of its maturation.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.109-112
• /
• 2008

In this study, Assessment of bond property of HSC with the rate of Blust-furnace(0, 12, and 25 percent by weight cement) and Evaluation of the relationship of the compressive strength coefficient (${\beta}$) between compressive strength with 40${\sim}$120MPa were performed. Design and Test of Bond specimens were carried out based on the ASTM C-234. Test results are follows, most specimens showed that the splitting failure in all specimens, except for B-40 series which showed that the pull-out failure. For the B-40 Series, the relation of compressive strength versus bond stress has well converged that of the proposed equation with the variation(${\beta}$=2/3) in UCB/E.E.R.C-83. The crack strength of concrete in splitting was proportioned to the compressive strength of concrete, and was the highest on the contents of blast furnace slag to 12 percent by weight of cement in each series, except for B-60 series. In the relation of admixture replacement rate versus maximum bond stress, The maximum bond stress was the highest in 12 percent by weight of cement according to less than 40MPa, and was the highest in 25 percent by weight of cement according to 80MPa.

• Microbiology and Biotechnology Letters
• /
• v.35 no.4
• /
• pp.285-291
• /
• 2007

Enantioconvergent hydrolysis process for the preparation of chiral diol from racemic epoxides by using the recombinant Caulobacter crescentus epoxide hydrolase (CcEH) in Escherichia coli BL21 (DE3) was optimized. For the optimization, the effects of detergent, temperature and product inhibition on the enantiopurity and the yield of diol were investigated. (R)-phenyl-1,2-ethanediol with 92% enantiomeric excess and 56% yield from 20 mM racemic styrene oxide was obtained by using the recombinant CcEH at the optimal condition of $10^{\circ}C$ and the addition of 2% (w/v) Tween 80. At 50 mM racemic styrene oxide was used as a substrate, (R)-phenyl-1,2-ethanediol was obtained with 87% enantiomeric excess and 77% yield. Racemic phenyl-1,2-ethanediol, (R)-phenyl-1,2-ethanediol and (S)-phenyl-1,2-ethanediol dramatically inhibited the hydrolytic activity of the recombinant CcEH. These results suggested that another EH with the regioselectivity on ${\beta}$-position of (R)-enantiomer and without feedback inhibition by products would be needed as the partner EH of C. crescentus EH.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.5
• /
• pp.94-104
• /
• 2006

The changed Korean government law associated with the public apartment housing supply, so called the $^{\circ}{\AE}$Apartment Sales Price $Cap^{\circ}{\phi}$, requires new system for estimating construction cost in order to set appropriate price. A model apartment project was carefully designed and its construction cost were analyzed in many different ways. Based on the analyses outcomes, 1,028,000 Won/m2 (excluding cost for underground parking lot) is the most appropriate Price Cap for a smaller than $85{\beta}{\geq}$ apartment unit. Further, it was revealed that the price have to be adjusted reflecting such factors as underground size; structural system; external complex quality; and consumer preferences. Findings from this study will enable the Korean government to realize faster and better application of the related laws. The methodology for obtaining appropriate apartment construction cost will also benefit for future researchers.

• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.165-179
• /
• 2005

The object of this study is a development of a stochastic user equilibrium transit assignment algorithm for multiple user classes considering stochastic characteristics and heterogeneous attributes of passengers. The existing transit assignment algorithms have limits to attain realistic results because they assume a characteristic of passengers to be equal. Although one group with transit information and the other group without it have different trip patterns, the past studies could not explain the differences. For overcoming the problems, we use following methods. First, we apply a stochastic transit assignment model to obtain the difference of the perceived travel cost between passengers and apply a multiple user class assignment model to obtain the heterogeneous qualify of groups to get realistic results. Second, we assume that person trips have influence on the travel cost function in the development of model. Third, we use a C-logit model for solving IIA(independence of irrelevant alternatives) problems. According to repetition assigned trips and equivalent path cost have difference by each group and each path. The result comes close to stochastic user equilibrium and converging speed is very fast. The algorithm of this study is expected to make good use of evaluation tools in the transit policies by applying heterogeneous attributes and OD data.