• 제목/요약/키워드: ${\alpha}-interior$

검색결과 69건 처리시간 0.025초

Rotor Position and Speed Estimation of Interior Permanent Magnet Synchronous Motor using Unscented Kalman Filter

  • An, Lu;Hameyer, Kay
    • Journal of international Conference on Electrical Machines and Systems
    • /
    • 제3권4호
    • /
    • pp.458-464
    • /
    • 2014
  • This paper proposes the rotor position and rotor speed estimation for an interior permanent magnet synchronous machines (IPMSM) using Unscented Kalman Filter (UKF) in alpha-beta coordinate system. Conventional algorithms using UKF are based on the simple observer model of IPMSM in d-q coordinate system. Rotor acceleration is neglected within the sampling step. An expansion of the observer model in an alpha-beta coordinate system with the consideration of the rotor speed variation provides the improved rotor position and speed estimation. The results show good stability concerning the expansion of observer model for the IPMSM.

GENERALIZED BIPOLAR FUZZY INTERIOR IDEALS IN ORDERED SEMIGROUPS

  • Ibrar, Muhammad;Khan, Asghar;Abbas, Fatima
    • 호남수학학술지
    • /
    • 제41권2호
    • /
    • pp.285-300
    • /
    • 2019
  • This research focuses on the characterization of an ordered semigroups (OS) in the frame work of generalized bipolar fuzzy interior ideals (BFII). Different classes namely regular, intra-regular, simple and semi-simple ordered semigroups were characterized in term of $({\alpha},{\beta})$-BFII (resp $({\alpha},{\beta})$-bipolar fuzzy ideals (BFI)). It has been proved that the notion of $({\in},{\in}{\gamma}q)$-BFII and $({\in},{\in}{\gamma}q)$-BFI overlap in semi-simple, regular and intra-regular ordered semigroups. The upper and lower part of $({\in},{\in}{\gamma}q)$-BFII are discussed.

순 Ti의 고온 가스질화에 따른 미세조직 변화 (Phase Changes of Pure Ti During High Temperature Gas Nitriding)

  • 이해정;공정현;배진범;서종환;김영희;성장현
    • 열처리공학회지
    • /
    • 제22권2호
    • /
    • pp.88-94
    • /
    • 2009
  • The effect of high temperature gas nitrding (HTGN) on the surface microstructure in pure Ti was investigated. Two phases of TiN and $Ti_2N$ appeared at the outmost surface, and the wide ${\alpha}$-Ti layer was formed at the next layer. On the other hand, the interior region, where the nitrogen was not permeated, exhibited ${\alpha}$'phase. The outmost surface of TiN and $Ti_2N$ showed the maximum hardness of 1000Hv, while the interior ${\alpha}$'phase was ${\sim}350$ Hv. The permeation depth of nitrogen increased with increasing the gas nitriding temperature and time. The nitrogen concentration of the surface layer seems to be over 12.7% at $1100^{\circ}C$.

침엽수 판재의 VOCs 방산특성 및 심신안정 효과 (VOCs Emission Characteristics and Psychological Effects of Interior Decorated Conifers)

  • 이희영;박상범;김은일;이상민;박종영
    • 한국가구학회지
    • /
    • 제20권2호
    • /
    • pp.115-121
    • /
    • 2009
  • This study examined the emission characteristics and psychological effects of volatile organic compounds (VOCs) emitted from wooden boards made of Pinus densiflora and Chamaecyparis obtusa, conifer commonly found in korean forests. Boards made of those species were used to decorate interior of a test room. Different proportions of interior (20%, 40%, 60%, 80% and 100% against the entire interior of the room) were decorated. Electroencephalogram and VOCs in the test room were measured 24 hours after interior decorated. As the results, when 40% of interior of the room decorated with both species of boards, the largest amount of alpha wave was detected. For board made of P. densiflora, as the proportion of interior decorated increased both natural VOCs(NVOCs) and anthropogenic VOCs(AVOCs) were increased. on the other hand, When interior decorated with board made of C, obtusa, little differences in VOCs with different area of interior decorated was detected. Board made of P. densiflor emitted a slightly higher amount of AVOCs than boards made of C. obtusa. NVOCs emitted from board made of P. densiflora was three to fifteen times more than NVOCs emitted from board made of C. obtusa.

  • PDF

Influence of Growth Conditions on Plasmid DNA Production

  • Silva, Filomena;Passarinha, Luis;Sousa, Fani;Queiroz, Joao A.;Domingues, Fernanda C.
    • Journal of Microbiology and Biotechnology
    • /
    • 제19권11호
    • /
    • pp.1408-1414
    • /
    • 2009
  • The obtention of high yields of purified plasmid DNA is viewed as an essential issue to be considered towards efficient production of DNA vaccines and therapeutic plasmids. In this work, Escherichia coli $DH5\alpha$. bearing the pVAXI-LacZ plasmid was grown in a developed semi-defined medium at different temperatures and tryptone concentrations. Analysis of pDNA yields and E. coli morphology revealed that at higher temperatures (37 and $40^{\circ}C$), higher specific yields and E. coli filamentation were obtained. However, the best results were achieved when a lower tryptone concentration was used. This approach was shown to be a powerful tool to promote plasmid amplification, keeping the desirable plasmid structure, and favoring the attainment of quality. Our results suggest that by using tryptone alone as an amino acid source, pDNA amplification was improved and a specific yield of 20.43 mg pDNA/g dcw was achieved, proving that this strategy can improve pDNA yield even at a small scale.

STANDARD STELLAR MODELS; $\alpha$ CEN A AND B

  • KIM YONG-CHEOL
    • 천문학회지
    • /
    • 제32권2호
    • /
    • pp.119-126
    • /
    • 1999
  • The standard stellar models for $\alpha$ Cen A and B have been constructed without resorting to the arbitrary constraint of the Solar mixing length ratio. Assuming that the chemical compositions and the ages of the two stars are the same, series of models have been constructed. Using the observational constraints, [Z/X], we were able to constrain the number of the 'possible' models. We find that utilizing the observational constraints of [Z/X] the best models for $\alpha$ Cen system are with the initial Z = 0.03, X = 0.66$\~$0.67. In particular, the primary and the secondary stars may have the same mixing length ratio 1.6$\~$1.7, which is the same as that of the calibrated Solar model. And, the age of the system is about 5.4 Gyr. Finally, the large spacing of the p-modes is predicted to be 104 $\pm$ 4$\mu$Hz for $\alpha$ Cen A.

  • PDF

상압소결 $\beta$-SiC에 있어서 표면부에서의 액상집중과 미세구조의 변화 (Concentration of Liquid-phase in the Surface Region and Microstructural Change in Pressureless Sintered$\beta$-SiC)

  • 이종국;양권승;김환
    • 한국세라믹학회지
    • /
    • 제33권8호
    • /
    • pp.921-927
    • /
    • 1996
  • The liquid-phase concentration from the interior to the surface region and its influence on the microstructural changes were investigated in pressureless sintered $\beta$-SiC Surface reaction-layer was formed by reaction of packing powder and volatile components on the surface during sintering which was induced the concentration of liquid-phase in the surface regions. The microstructural changes between the surface region and the interior were appeared in sintered specimen which was resulted from the difference of liquid-phase content during sintering. Microstructural changes were observd with the depth of about 250${\mu}{\textrm}{m}$ from he surface. The grain size and aspect ratio of SiC in the interior are larger than those in the surface region and the rate of transforma-tion of $\beta$-to $\alpha$-SiC during sintering is higher in the interior than that in the surface region.

  • PDF

Effect of Increased Oxygen Content due to Intensive Milling on Phase and Microstructural Development of Silicon Nitride

  • Kim, Hai-Doo;Ellen Y. Sun;Paul F. Becher;Kim, Hyo-Jong;Han, Byung-Dong;Park, Dong-Soo
    • 한국세라믹학회지
    • /
    • 제38권5호
    • /
    • pp.405-411
    • /
    • 2001
  • Compacts of a mixture of fine $\alpha$-Si$_3$N$_4$powders, 6% $Y_2$O$_3$and 1% $Al_2$O$_3$were attrition milled time on phase and microstructural development in silicon nitride ceramics. The sintered surface and the interior showed different behaviors in phase and microstructral developments. Increased oxygen content with increased milling time of powder mixture leads to the formation of Si$_2$$N_2$O phase at temperatures as low as 155$0^{\circ}C$. Si$_2$$N_2$O is stable in the interior of the samples but unstable in the surface region of the specimen sintered at higher temperature. This results in a duplex structure where the interior consists of Si$_2$$N_2$O grains dispersed in $\beta$-Si$_3$N$_4$matrix and a surface which contains only $\beta$-Si$_3$N$_4$. The alpha to beta phase transformation and the microstructural development are shown to be influenced by the formation and decomposition of the Si$_2$$N_2$O.

  • PDF

LH공사 발코니확장형아파트 단위세대 평면계획경향에 관한 연구 (A Study on Tendency of Extended Balcony Unit Plans of LH Corp)

  • 서붕교;최정오
    • 한국실내디자인학회논문집
    • /
    • 제20권1호
    • /
    • pp.146-153
    • /
    • 2011
  • The purpose of this study was to analyze the type of extended-balcony floor plan which has been reflected as a various forms after making amendment to the apartment extended-balcony legislation on December 2005 and to understand the design tendency of housing unit plan and the characteristic of living space planning by the type of size(pyeong) and extension. The objects of analysis and the plans are 333 example(235 of $84m^2$, 98 of $59m^2$) from the LH corporation competition. The design tendency of balcony space after extension is as follows; First, a type of extension for simple area to increase the area of room adjacent to balcony through balcony extension. Second, a type of functional reinforcement for private room to separate the mixed function followed by strengthening the individual function of the private room. Third, a type of ${\alpha}$-room to play new functions as hobby room, study room, soho-type room with working from home by extending balcony. Fourth, a integrated type to increase flexible efficiency of bed room, living room and kitchen by integrating extended-balcony from the flexible plan. Along with the evaluation of living style through user's environment-behavior research and the counterplan for evacuation space, indoor thermal environment and space for fulfilling the original function of balcony should be proposed in the future study.

쌀전분(澱粉) 분해물(分解物) 분석(分析)에 의한 세균성(細菌性) ${\alpha}-Amylase$의 작용(作用) 특성(特性) (Characterization of Bacterial ${\alpha}-Amylase$ by Determination of Rice Starch Hydrolysis Product)

  • 김해영;박관화
    • Applied Biological Chemistry
    • /
    • 제29권3호
    • /
    • pp.248-254
    • /
    • 1986
  • 쌀의 생전분(生澱粉) 상태와 호화전분(糊化澱粉) 상태에 대한 전분분해효소의 작용특성과 이용방법(利用方法)을 조사하기 위하여 생전분과 호화전분에 세균성 ${\alpha}-amylase$ 및 glucoamylase를 처리하고, 생성되는 당의 종류를 정량하였다. 생전분에 ${\alpha}-amylase$를 작용시켰을 때에는 glucose(45%), maltese(33%), maltotriose(19%), maltotetrose 이상의 당류(3%) 등의 순서로 생성되었고, 호화전분에 작용(作用)했을 때에는 maltotriose(31%), maltose(31%), maltotetrose 이상의 고당류 (22%), glucose (15%)의 순서로 생성(生成)되었다. 한편 glucoamylase를 처리하였을 때에는 생전분과 호화전분에서 다같이 주로 glucose가 생성되었다. 전자현미경으로 분해된 상태를 확인한 결과, 생전분은 ${\alpha}-amylase$에 의하여 pinhole이 생성되고 전분입자의 표면침식이 잘되있고, 호화전분은 입자의 중앙부위에 공동(空洞)이 생성(生成)되었다. 이상의 결과(結果)로 보아 세균성 ${\alpha}-amylase$는 생전분 입자의 표면에 작용하여 말단기부터 glucose 및 maltose 단위로 분해하며 호화된 전분입자에는 임의의 장소에서 전분을 가수분해함을 알 수 있었다.

  • PDF