• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.125-132
• /
• 2018

The direct synthesis of $C_2$ chemical directly from methane was studied by employing catalysts with ordered mesopores in a dielectric barrier discharge plasma reactor. The reaction was carried out using MgO/OMA (ordered mesoporous alumina), $MgO/{\gamma}-Al_2O_3$ and $MgO/{\alpha}-Al_2O_3$ as catalysts. When MgO/OMA was applied, it showed excellent performance in the plasma reactor using pulse-type power supply and the selectivity of $C_2$ chemicals was measured as 67%. The effects of metal oxide type, textural property of support, alumina phase and power supply type on catalytic performance were investigated especially in terms of $C_2$ chemical formation. BET (Brunauer, Emmett, Teller), X-ray diffraction, transmission electron microscope and thermogravimetric analysis were used to investigate the characterization of the catalyst before and after the reaction.

• Journal of Powder Materials
• /
• v.16 no.6
• /
• pp.431-437
• /
• 2009

Various inorganic fillers improve the thermal conductivity and physical properties of organic products. Alumina has been used a representative filler in the heat radiation sheet for the heat radiation of electric device. The high filling rate of alumina increases the thermal conductivity and properties of products. We successfully developed the spherical alumina by flame fusion process using the oxygen burner with LPG fuel. In the high temperature flame (2500$\sim$3000$^{\circ}C$) of oxygen burner, sprayed powders were melting and then rotated by carrier gas. This surface melting and rotation process made spherical alumina. Especially effects of chemical composition and particle size of stating materials on the melting behavior of starting materials in the flame and spheroidization ratio were investigated. As a result, spheroidization ratio of boehmite and aluminum hydroxide with endothermic reaction of dehydration process was lower than that of the sintered alumina without dehydration reaction.

• Journal of the Microelectronics and Packaging Society
• /
• v.5 no.1
• /
• pp.19-30
• /
• 1998

Aluminium secondary butoxide(ASB)를 출발물질로 하여 졸-겔방법에 의해 소결거 동에 미치는 $\alpha$-Al2O3 seed의 첨가효과에 따른 알루미나의 저온소결 가능성과 알루미나의 상전이에 대하여 TEM, DTA, XRD, FT-IR등으로 고찰을 하였다. TEM 분석결과 초기 생 성물인 boehmite가 비정질에서 단결정질로 진행되어 가고 있음을 확인하였다. 그리고 DTA 분석결과 $\alpha$-Al2O3 seed의 첨가한 경우 seed의 함량이 증가함에 따라 상전이 온도는 점차 낮아졌으며 약 0.4wt%일 때 seed를 첨가하지 않은 시료의 전이온도(약 1126$^{\circ}C$)에 비하여 약 7$0^{\circ}C$ 저하된 약 1056$^{\circ}C$로나타났으며 그 이상의 seedcja가에 있어서는 전이온도에 크게 영향을 나타내지 않았다. 또한 XRD분석결과 $\alpha$-Al2O3 seed를 첨가하지 않은 경우 110$0^{\circ}C$이 상의 온도에서 $\alpha$상이 생성되었음을 알수 있었다. 또한 100$0^{\circ}C$이상의 온도에서 $\alpha$상이 생성 되었음을 나타내는 Al-O 흡수특성 피크가 400~1000cm-1 범위에서 나타내고 있는 것을 FT-IR 분석결과에서도 확인할수 있었다. 그리고 $\alpha$-Al2O3 seed를 약 0.4wt% 첨가시 900~ 95$0^{\circ}C$에서 $\alpha$상이 형성됨을 관찰할 수 있었다.

• Journal of the Korean Ceramic Society
• /
• v.39 no.10
• /
• pp.1007-1010
• /
• 2002

Alpha alumina platelet particles were synthesized from the powder mixture of ${\gamma}-Al_2O_3and\;Na_2SO_4$ with the use of microwave heating. The characteristics of the particles such as particle size and particle size distribution were compared with those of particles obtained from the same mixture without the use of microwave. Sample with the use of microwave showed small particle size and narrow particle size distribution compared to that without the use of microwave.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.2
• /
• pp.80-86
• /
• 2002

$Al_{2}O_{3}/SiC$ nanocomposites were made by infiltrating partially sintered alumina bodies with polycarbosilane (PCS) solutions, which is a SiC polymer precursor, with pressureless sintering. The SiC content, densification, phases, strength, and microstructure were investigated with the processing parameters such as PCS solution concentration and heat treatment condition for PCS pyrolysis and sintering. The results were compared with those for pure alumina and nanocomposite samples made by the existing polymer precursor route (i.e. the PCS addition process). The SiC contents of up to 1.5 vol% were obtained by the PCS infiltration. PCS pyrolysis, followed by air heat treatment, was needed before sintering to avoid a cracking problem and to attain a densification as high as 98 % of theoretical. The nanocomposites exhibited significantly higher strength than pure alumina and those prepared by the PCS addition process despite larger grain size. Besides $\alpha-Al_{2}O_{3}/SiC$ and $\beta-SiC$ phases, mullite was present a little in the nanocomposites, which resulted from the reaction of $SiO_{2}$ in the pyrolysis product of PCS with the $Al_{2}O_{3}$ matrix during sintering. The nanocomposites had intagranular particles believed to be SiC, which is a typical feature of $Al_{2}O_{3}/SiC$ nanocomposites.

• Journal of the Korean Chemical Society
• /
• v.55 no.5
• /
• pp.812-818
• /
• 2011

[ $V_{0.9}Sb_{0.1}O_x$ ]systems, bulk and deposited on different supports (five types of ${\gamma}$-aluminas, ${\alpha}$-alumina, silica-alumina, silica gel, magnesium oxide), have been tested in the oxidative dehydrogenation (ODH) of iso-butane. This statement is derived from the data obtained by a set of characterisation techniques(specific surface area measurements, X-ray diffraction, X-ray photoelectron spectroscopy, laser Raman spectroscopy, in situ differential scanning calorimetry and in situ diffuse reflectance-absorption infrared Fourier transform spectroscopy).

• Journal of Environmental Health Sciences
• /
• v.27 no.1
• /
• pp.88-92
• /
• 2001

The simultaneous analytical method for 37 residual pesticides was developed by a gas chromatography with $^{63}$ Ni electron capture detector. Pesticides added in soybean sample were extracted with 70% acetone in water and methylene chloride in oder, and then cleaned up via open-column apparatus packed with florisil and alumina N. The Ultra-2 fused capillary column was used to separate the products. The resolution between the last isomeric peak of cypermethrin (56.398 min) and the first isomeric peak of flucythrinate (56.421 min) was not satisfactory and the last isomeric peak of fenvalerate(58.783 min) and the first isomeric peak of fluvalinate(58.835 min) was overlapped. Except for $\alpha$-BHC, dichlofluanid, captan, and captafol, most recoveries were showed over 70%.

• Journal of the Korean Ceramic Society
• /
• v.30 no.12
• /
• pp.1029-1038
• /
• 1993

The microstructures of aluminas, included of dissolved CaO as $\alpha$-alumina seeded pseudo-boehmite hydrosol was gelled in plaster mold and doped of MgO as dipping of calcines(120$0^{\circ}C$-2h) into Mg-nitrate solution, were compared to the one of which additives are excluded during the gellation. It was formed the boundary layer of 300~350${\mu}{\textrm}{m}$ distance from surface to the inside, containing of approximately 500ppm CaO by dissolved Ca from plaster mold. As the MgO addition to the boundary layer with dissolved CaO, the microstructure of the layer was uniformed and inhibited the grian growth, compared to one of that additives be excluded specimen and of MgO doped-inside region. This result was considered as abnormal grain growth and effect of flat boundary formation be appeared by effects of dissolved CaO, were decreased by MgO co-doping.

• Journal of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.414-421
• /
• 1991

High-purity alumina powder was prepared by extracting the natural alumino-silicate mineral (halloysite) in H$_2$SO$_4$ solution. For the selective precipitation of alum and aluminum hydroxide, the solubility diagram was prior calculated by also considering the formation of hydroxides and carbonates for all the metal ions in an aqueous solution, which allow us to control the contamination of impurities envolved in the natural minerals. Ammonium aluminum sulfate (alum) and alumium hydroxide could be successfully prepared at pH = 1.5∼2.5 and pH = 6∼8, respectively according to our solubility diagrams. The purity of alum-and hydroxide-derived ${\alpha}-Al_2O_3$ was determined to be 99.7${\%}$ and 99.0${\%}$, respectively, which indicates the former route would be more desirable for the large scale application. It is also worthy to note that the impurities like Na and Si were strongly reduced in the former (Na = 0.05${\%}$, Si = 0.09${\%}$) compared to the latter (Na = 0.29${\%}$, Si = 0.12${\%}$).

• The Journal of Engineering Research
• /
• v.3 no.1
• /
• pp.181-187
• /
• 1998

Hydroxyapatite was used as implant materials, because it has a good biocompatibility and is similar to human bone. However it is not expected to have a high strength as implant materials because of a low fracture strength after sintering of HAp. Alumina ($\alpha$-alumina) shows a stable chemical properties and high strength in physiological environments. Thus it was tried to use a HAp coatings on Alumina substrate as implant materials. In this study, HAp was coated on Alumina substrate by lon Beam Assisted Deposition(IBAD). Then Ag was impregnated on HAp coating layer, which showed antimicrobial effects. To carry out the ion exchange of $Ag^+$ with $Ca^{2+}$ in HAp on the surface, HAp coated alumina substrate was immersed in 20ppm, 100ppm $AgNO_3$ solution at room temperature for 48 hours. Antimicrobial test was studied by using bacteria, which normally caused periprosthetic infections. The follwing bacteria was used in antimicrobial test. Escherichia coli, Pseudomonas aeruginosa (gram negative) and staphylococcus epidermidis (gram positive). Ag impregnated HAp shows very good antimicrobial effects against these bacteria. The surface structure of sample, which was treated in $AgNO_3$ solution was studied by SEM, XRD. Ag release curve was studied in Simulated Body Fluid (SBF) solution.