• Proceedings of the KAIS Fall Conference
• /
• 2004.06a
• /
• pp.151-154
• /
• 2004

본 논문에서는 기존 Wilkenson Power Divider의 소형화를 위해 마이크로스트립 선로에 DGS를 삽입하였다. 특성 임피던스 70.7$\Omega$의 $\lambda$/4 마이 크로스트림 선로를 50$\Omega$ 마이크로스트립 선로에 나선형 DGS를 삽입하여 70.7$\Omega$ 선로를 구현하였다. 이 나선형 DGS를 갖는 마이크로스트립 선로의 소형화를 확인하기 위해 각각 3dB Wilkenson Power Divider와 4way Power Divider를 제작하였다. 제작된 3dB Power Divider는 기존의 3dB Power Divider의 70.7$\Omega$ 전송선로의 길이가 31.95mm인 것에 반해 나선형 DGS를 갖는 50$\Omega$ 전송선로는 21.22mm로 약 10mm (약 $30\%$) 정도 길이가 줄었음을 알 수 있다. 또한 이 3dB Power Divider를 사용하여 4way Power Divider를 구현하였다. 이와 같이 마이크로스트립 선로에 DGS를 삽입함으로 인해 선로의 길이를 줄여 소형화 할 수 있음을 알 수 있다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.03a
• /
• pp.165-170
• /
• 1997

The study presents an computer-aided analysis and its design for the forming process of $\Omega$-type bellows tube. Finite element analysis was carried out to perform the process simulation. Based on the analytic results of various conditions, the forming conditions used for angled U-type bellows tube were settled. The 3D modeling was constructed by I-DEAS and PAM-STAMP was used for process simulation. It is concluded that the spring back of formed bellows influences $\Omega$-shape and these results can be used for the process design.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.1
• /
• pp.12-17
• /
• 2004

The body-tied FinFETs (bulk FinFETs) implemented on bulk Si substrate were characterized through 3-dimensional device simulation. By controlling the doping profile along the vertical fin body, the bulk FinFETs can be scaled down to sub-30 nm. Device characteristics with the body shape were also shown. At a contact resistivity of $1{\times}10^{-7}\;{\Omega}\;cm^2$, the device with side metal contact of fin source/drain showed higher drain current by about two. The C-V results were also shown for the first time.

• Proceedings of the KSR Conference
• /
• 1999.05a
• /
• pp.67-74
• /
• 1999

When high speed train meets sidewind, folwfields around the train is very complex. In this case, the force by sidewind has a bad effect on stability of train. We can observe that the flow separates, reattaches, and forms all unsteady vortex in the wake region behind tile structure. Such folwfield can be analyzed by $\kappa$-$\omega$ SST model, and we investigate the effect for various section shape of high speed train. So we acquire the result that as tile corner of train section is rounder, stability of train is better.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.313-313
• /
• 2016

Transparent conductive oxide (TCO) films have many disadvantages, such as rarity, possible exhaustion, process temperature limitations, and brittleness on a flexible substrate. In particular, as display technology moves toward flexible displays, TCO will become completely unsuitable due to its brittleness. To address theses issue, many researchers have been studying TCO substitutes. In recent efforts, metal nanowires, conducting polymers, carbon nanotube networks, graphene films, hybrid thin films, and metal meshes/grids have been evaluated as candidates to replace TCO electrodes. In this study, we fabricated the TCO film with Ag meshes shape using polystyrene (PS) beads monolayer on the substrate. The PS beads were used as a template to create the mesh pattern. We fabricated the monolayer on the flexible substrate (PES) with the well-aligned PS beads. Electrodes with Ag mesh shape were formed using this patterned monolayer. We could fabricated the Ag mesh electrode with the sheet resistance with $8ohm{\Omega}/{\Box}$.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.4
• /
• pp.590-594
• /
• 2012

ZnO nanowires were fabricated by hydrothermal synthesis technique for field emission device application. Al-doped zinc oxide (AZO) thin films were prepared as seed layer of catalyst for the ZnO nanowire synthesis, for which conductivity of the seed layer was tried to be improved for enhancing the field emission property of the ZnO nanowire. The AZO seed layer revealed specific resistivity of $ 7.466{\times}10^{-4}[{\Omega}{\cdot}cm]$ and carrier mobility of 18.6[$cm^2$/Vs]. Additionally, upper tip of the prepared ZnO nanowires was treated by hydrochloric acid (HCl) to form a nanocone shape of ZnO nanowire, which was aimed for enhanced focusing of electric field on that and resultingly to improve field emission property of the ZnO nanowires. The ZnO nanowire with nanocone shape revealed decreased threshold electric field and increased current density than those of the simple ZnO nanowires.

• Honam Mathematical Journal
• /
• v.23 no.1
• /
• pp.91-111
• /
• 2001

In this paper we prove the following : Let M be a semi-invariant submanifold with almost contact metric structure (${\phi}$, ${\xi}$, g) of codimension 3 in a complex hyperbolic space $H_{n+1}{\mathbb{C}}$. Suppose that the third fundamental form n satisfies $dn=2{\theta}{\omega}$ for a certain scalar ${\theta}({\leq}{\frac{c}{2}})$, where ${\omega}(X,\;Y)=g(X,\;{\phi}Y)$ for any vectors X and Y on M. Then M has constant eigenvalues correponding the shape operator A in the direction of the distinguished normal and the structure vector ${\xi}$ is an eigenvector of A if and only if M is locally congruent to one of the type $A_0$, $A_1$, $A_2$ or B in $H_n{\mathbb{C}}$.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.56.2-56.2
• /
• 2016

We present chemical abundances for about 800 red giant stars in Omega Centauri, based on medium-resolution spectra obtained using Hydra multi-fiber spectrograph at the CTIO 4-m telescope. Our sample covers 14.2 < V < 15.0, and is almost unbiased against colors (and therefore metallicity). The metallicity distribution function (MDF) constructed from our data has an overall shape and local peaks that approximately match those for brighter giant stars in Johnson et al.. We also find that more metal-rich cluster members are more concentrated in the cluster center, which is consistent with previous studies. On the other hand, we find no clear evidence for such a spatial dependence with respect to alpha elemental abundance ([${\alpha}/Fe$]).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.652-655
• /
• 2003

In this paper, step-down piezoelectric transformer is studied. The piezoelectric transformer, made of lead zirconate titanate solid solution ceramic, is operated by a fundamental contour-extensional vibration mode. The transformer of 14mm length, 14mm width and 4.5mm thickness was made up two shape(Type I and II). The resonant frequency (fr) is 144kHz and 128kHz at the load resistant of $7.5{\Omega}$ that is a similar to calculating matching impedance. The gain (G) obtained 0.19 and 0.08 at each resonant frequency, when applied input voltage is 25V. The temperature difference with the variation of load resistant was increased with increasing load resistant and was the lowest at $7.5{\Omega}$ near the matching of output impedance.

• Proceedings of the Optical Society of Korea Conference
• /
• 1991.06a
• /
• pp.45-45
• /
• 1991

We describe a simple method for obtaining a narrow dip with subnatural linewidth in Doppler-free laser spectroscopy. The method is based on detecting the absolute magnitude, ｜Re[$\chi$NL($\omega$-$\omega$o)]｜, of the dispersive component (real part) of the nonlinear susceptibility induced by the pump beam, and the line shape recorded therefore exhibits a fully resolved technique and a dual phase lock-in amplifier, we have demonstrated the dip as narrow as 3 MHz in the laser-induced birefringence spectrum of the Na D1 line (natural linewidth 10 MHz). Possible spectroscopic applications are considered.