• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.224-227
• /
• 2000

Modal damping characteristics of the flexural vibration of a sandwich beam with paaially inserted viscoelastic layer have been quantitatively studied using the finite element analysis in combination with an experiment. Antisymmetric mode shapes of the flexural vibration were visualized by the holographic interferometry and agreed with those calculated by the finite element simulation. Effects of the length and thickness of partial viscoelastic layers on the system loss factor($\mu$) and resonant frequency($\omega$) were considerably latge at both symmetric and antisymmetric modes of the sandwich beam.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2000년도 International Symposium on Magnetics The 2000 Fall Conference
• /
• pp.5-32
• /
• 2000

MRAM, High performance MRAM using MTJS demostrated, fully integrated MTJ MRAM with CMOS circuits, write time ~2.3 nsec; read time ~3 nsec, Thermally stable up to ~350 C, Switching field distibution controlled by size & shape. Magnetic Tunnel Junction Properties, Magnetoresistance: ~50% at room temperature, enhanced by thermal treatment, Negative and Positive MR by interface modification, Spin Polarization: >55% at 0.25K, Insensitive ot FM composition, Resistance $\times$ Area product, ranging from ~20 to 10$^{9}$ $\Omega$(${\mu}{\textrm}{m}$)$^{2}$, Spin valve transistor, Tunnel injected spin polarization for "hot" electrons, Decrease of MTJMR at high bias originates from anode.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1990년도 추계학술대회 논문집
• /
• pp.39-44
• /
• 1990

Polycrystalline CdS films were grown on glass substrate with conducting indium tin oxide(ITO) by electrodeposition. The average size of the plate-shape grains o the CdS films was from 0.3um to 0.05um, and the adhesion to ITO was excellent. The optical band gap of the electrodeposited CdS films was in the range from 2.51eV to 2.68 eV. The optical transmittance was 80% and the electrical resistivity varied from 10$^3$ to 10$\^$5/$\Omega$-cm depending on the deposition condition.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.551-552
• /
• 2006

This study was attended to demonstrate synthesis of silver nanoparticles stabilized with polymer and their applicability to printed electronics. Silver nanoparticles were synthesized by reduction of silver nitrate in aqueous solution in the presence of polyvinyl pyrrolidone (PVP) as a stabilizer. The ink used here is composed of 50 wt% Ag NP, 15 wt% humectant and then were printed on polyimide film. Particle deposit morphologies were controlled by varying the ink compositions. Printed silver patterns and dots were cured on a convection oven in air at $300^{\circ}C$ for 60 min. The printed patterns show good shape definition and the resistivity of the printed films is about $5{\mu}{\Omega}{\cdot}cm$.

• 천문학회보
• /
• 제44권1호
• /
• pp.78.2-78.2
• /
• 2019

We develop an Alcock-Paczynski (AP) test method that uses the evolution of redshift-space two-point correlation function (2pCF) of galaxies. The method improves the AP test proposed by Li et al. (2015) in that it uses the full two-dimensional shape of the correlation function. Similarly to the original method, the new one uses the 2pCF in redshift space with its amplitude normalized. Cosmological constraints can be obtained by examining the redshift dependence of the normalized 2pCF. This is because the 2pCF should not change apart from the expected small non-linear evolution if galaxy clustering is not distorted by incorrect choice of cosmology used to convert redshift to comoving distance. Our new method decomposes the redshift difference of the 2-dimensional correlation function into the Legendre polynomials whose amplitudes are modelled by radial fitting functions. The shape of the normalized 2pCF suffers from small intrinsic time evolution due to non-linear gravitational evolution and change of type of galaxies between different redshifts. It can be accurately measured by using state of the art cosmological simulations. We use a set of our Multiverse simulations to find that the systematic effects on the shape of the normalized 2pCF are quite insensitive to change of cosmology over \Omega_m=0.21 - 0.31 and w=-0.5 - -1.5. Thanks to this finding, we can now apply our method for the AP test using the non-linear systematics measured from a single simulation of the fiducial cosmological model.

• 전기학회논문지
• /
• 제67권3호
• /
• pp.413-418
• /
• 2018

In this paper, we describe the development of a non-enzymatic glucose sensor based on copper nanocubes(Cu NCs) electroplated laser induced graphene(LIG) electrodes which can detect a certain range of glucose concentrations. $CO_2$ laser equipment was used to form LIG electrodes on the PI film. This fabrication method allows easy control of the LIG electrode size and shape. The Cu NCs were electrochemically deposited on the LIG electrodes to improve electron transfer rates and thus enhancing electrocatalytic reaction with glucose. The average sheet resistances before and after electroplating were $15.6{\Omega}/{\Box}$ and $19.6{\Omega}/{\Box}$, respectively, which confirmed that copper nanocubes were formed on the laser induced graphene electrodes. The prepared electrode was used to measure the current according to glucose concentration using an electrochemical method. The LIG electrodes with Cu NCs demonstrated a high degree of sensitivity ($1643.31{\mu}A/mM{\cdot}cm^2$), good stability with a linear response to glucose ranging from 0.05 mM to 1 mM concentration, and a limit of detection of 0.05 mM. In order to verify that these electrodes can be used as flexible devices, the electrodes were bent to $30^{\circ}$, $90^{\circ}$, and $180^{\circ}$ and cyclic voltammetry measurements were taken while the electrodes were bent. The measured data showed that the peak voltage was almost constant at 0.42 V and the signal was stable even in the flexed condition. Therefore, it is concluded that these electrodes can be used in flexible sensors for detecting glucose in the physiological sample like saliva, tear or sweat.

• 한국세라믹학회지
• /
• 제41권6호
• /
• pp.476-480
• /
• 2004

펄스 do 마그네트론 스퍼터링법에 의해 유리 기판 위에 AZO(Al-doped ZnO) 박막을 제조하여 박막의 구조적, 전기적 및 광학적 특성을 조사하였다. 본 연구를 위해 l.0 at% Al이 도핑 된 ZnO세라믹 타켓을 사용하였다. XRD 분석을 통하여 30KHz의 펄스 주파수가 인가되었을 때 c축 배향성이 가장 우수하게 나타났고, 표면 형상 분석을 통하여 매우 치밀한 박막이 성장되었음을 알 수 있었다. 증착율은 펄스 주파수가 증가함에 따라 선형적으로 감소하였고, 30KHz의 펼스 주파수가 인가되었을 때 비저항은 8.67${\times}$$10^{-4}$ $\Omega$-cm의 가장 낮은 비저항을 나타내었으며, UV-vis. 투과율 측정결과, 평균 85% 이상의 높은 투과도를 나타내었다. 이러한 낮은 비저항 및 높은 광 투과도로 볼 때 AZO 박막은 투명 전도성 산화물 박막으로의 응용 가능성을 나타내었다.

• 센서학회지
• /
• 제16권1호
• /
• pp.24-32
• /
• 2007

Conductive rubber material was molded in a belt shape to measure respiration. Its resistivity was approximately $0.03{\;}{\Omega}m$ and the resistance-displacement relationship showed a negative exponent. The temperature coefficient was approximately $0.006{\;}k{\Omega}/^{\circ}C$ negligible when practically applied on the abdomen. The conductive rubber belt was applied on a normal male's abdomen with the dimensional change measured during resting breathing. The abdominal signal was differentiated ($F_{m}$) and compared with the accurate standard air flow rate signal ($F_{s}$) obtained by pneumotachometry. $F_{m}$ and $F_{s}$ differed in waveform, but the start and end timings of each breaths were clearly synchronized, demonstrating that the respiratory frequency could be accurately estimated before further processing of $F_{m}$. $F_{m}-F_{s}$ loop showed a nonlinear hysteresis within each breath period, thus 6 piecewise linear approximation was performed, leading to a mean relative error of 14 %. This error level was relatively large for clinical application, though customized calibration seemed feasible for monitoring general variation of ventilation. The present technique would be of convenient and practical application as a new wearable respiratory transducer.

• 전기학회논문지
• /
• 제60권6호
• /
• pp.1152-1162
• /
• 2011

In this paper, a single-phase DC-AC inverter using two embedded Z-source converters is proposed. The proposed inverter is composed of two embedded Z-source converters with common DC source and output AC load. The output AC voltage of the inverter is obtained by the difference of output capacitor voltages of each converter. The output voltage of each converter take shape of the asymmetrical AC waveform centering zero voltage. Therefore, the proposed inverter can generate the same output voltage despite low VA rating L-C elements, compared to the conventional inverter using high DC voltage with AC ripple. To verify the validity of the proposed system, the PSIM simulation was achieved under the condition of rapid increase of DC source (110[V]${\rightarrow}$150[V]) and R-load (50[${\Omega}$]${\rightarrow}$300[${\Omega}$]). For controlling the voltage of the inverter system, the one-cycle controller was adopted. As results, the proposed inverter output the constant AC voltage (220[V]rms/60[Hz]) for all conditions. Also, the R-L load and nonlinear diode load were adopted for the proposed inverter loads, and we could know that the its output voltage characteristics were as good as the pure R-load. Finally, the RMS and THD of output AC voltage were examined for the different loads, input DC voltages and reference voltage signals.

• 한국수산과학회지
• /
• 제49권1호
• /
• pp.30-37
• /
• 2016

Microalgae are functional foods because they contain special anti-aging inhibitors and other functional components, such as ecosapentaenoic acid (EPA), docosahexaenoic acid (DHA), and omega-3 polyunsaturated fatty acids. Many of these functional dietary components are absent in animals and terrestrial plants. Thus, microalgae are widely utilized in human functional foods and in the feed provided to farmed fish and terrestrial livestock. Many marine organisms consume microalgae, often because they are in an appropriate portion of the cell size spectrum, but also because of their nutritional content. The nutritional requirements of marine organisms differ from those of terrestrial animals. After hatching, marine animals need small live forage species that have high omega-3 polyunsaturated fatty acid contents, including EPA and DHA. Euglena cells have both plant and animal characteristics; they are motile, elliptical in shape, 15-500 μm in diameter, and have a valuable nutritional content. Mixotrophic cell cultivation provided the best growth rates and nutritional content. Diverse carbon (fructose, lactose, glucose, maltose and sucrose) and nitrogen (tryptone, peptone, yeast extract, urea and sodium glutamate) supported the growth of microalgae with high lipid contents. We found that the best carbon and nitrogen sources for the production of high quality Euglena cells were glucose (10 g L^–1) and sodium glutamate (1.0 g L^–1), respectively.