• Journal of Korean Dental Science
• /
• v.11 no.2
• /
• pp.71-81
• /
• 2018

Purpose: The purpose of this study was to investigate the corrosion behaviors of dental implant alloy after microsized surface modification in electrolytes containing Mn ion. Materials and Methods: $Mn-TiO_2$ coatings were prepared on the Ti-6Al-4V alloy for dental implants using a plasma electrolytic oxidation (PEO) method carried out in electrolytes containing different concentrations of Mn, namely, 0%, 5%, and 20%. Potentiodynamic method was employed to examine the corrosion behaviors, and the alternatingcurrent (AC) impedance behaviors were examined in 0.9% NaCl solution at $36.5^{\circ}C{\pm}1.0^{\circ}C$ using a potentiostat and an electrochemical impedance spectroscope. The potentiodynamic test was performed with a scanning rate of $1.667mV\;s^{-1}$ from -1,500 to 2,000 mV. A frequency range of $10^{-1}$ to $10^5Hz$ was used for the electrochemical impedance spectroscopy (EIS) measurements. The amplitude of the AC signal was 10 mV, and 5 points per decade were used. The morphology and structure of the samples were examined using field-emission scanning electron microscopy and thin-film X-ray diffraction. The elemental analysis was performed using energy-dispersive X-ray spectroscopy. Result: The PEO-treated surface exhibited an irregular pore shape, and the pore size and number of the pores increased with an increase in the Mn concentration. For the PEO-treated surface, a higher corrosion current density ($I_{corr}$) and a lower corrosion potential ($E_{corr}$) was obtained as compared to that of the bulk surface. However, the current density in the passive regions ($I_{pass}$) was found to be more stable for the PEO-treated surface than that of the bulk surface. As the Mn concentration increased, the capacitance values of the outer porous layer and the barrier layer decreased, and the polarization resistance of the barrier layers increased. In the case of the Mn/Ca-P coatings, the corroded surface was found to be covered with corrosion products. Conclusion: It is confirmed that corrosion resistance and polarization resistance of PEO-treated alloy increased as Mn content increased, and PEO-treated surface showed lower current density in the passive region.

• Korean Journal of Metals and Materials
• /
• v.47 no.2
• /
• pp.129-137
• /
• 2009

Corrosion behaviors of TiN coated dental casting alloys have been researched by using various electrochemical methods. Three casting alloys (Alloy 1: 63Co-27Cr-5.5Mo, Alloy 2: 63Ni-16Cr-5Mo, Alloy 3: 63Co-30Cr-5Mo) were prepared for fabricating partial denture frameworks with various casting methods; centrifugal casting(CF), high frequency induction casting(HFI) and vacuum pressure casting(VP). The specimens were coated with TiN film by RF-magnetron sputtering method. The corrosion behaviors were investigated using potentiostat (EG&G Co, 263A. USA) in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. The corrosion morphologies were analyzed using FE-SEM and EDX. Alloy 1 and Alloy 2 showed the ${\alpha}-Co$ and ${\varepsilon}-Co$ phase on the matrix, and it was disappeared in case of TiN coated Alloy 1 and 2. In the Alloy 3, $Ni_2Cr$ second phases were appeared at matrix. Corrosion potentials of TiN coated alloy were higher than that of non-coated alloy, but current density at passive region of TiN coated alloy was lower than that of non-coated alloy. Pitting corrosion resistances were increased in the order of centrifugal casting, high frequency induction casting and vacuum pressure casting method from cyclic potentiodynamic polarization test.

• Journal of Trauma and Injury
• /
• v.36 no.3
• /
• pp.187-195
• /
• 2023

Purpose: This study aimed to determine the risk factors associated with the severity of fall-related injuries among patients who suffered a fall from similar heights and analyze differences in injury sites according to intentionality and injury severity. Methods: The Emergency Department-based Injury In-depth Surveillance (EDIIS) data collected between 2019 and 2020 were used in this retrospective study. Patients with fall-related injuries who fell from a height of ≥6 and <9 m were included. Patients were categorized into the severe and mild/moderate groups according to their excessive mortality ratio-adjusted Injury Severity Score (EMRISS) and the intention and non-intention groups. Injury-related and outcome-related factors were compared between the groups. Results: In total, 33,046 patients sustained fall-related injuries. Among them, 543 were enrolled for analysis. A total of 256 and 287 patients were included in the severe and mild/moderate groups, respectively, and 93 and 450 patients were included in the intention and non-intention groups, respectively. The median age was 50 years (range, 39-60 years) and 45 years (range, 27-56 years) in the severe and mild/moderate groups, respectively (P<0.001). In multivariable analysis, higher height (odds ratio [OR] 1.638; 95% confidence interval [Cl], 1.279-2.098) and accompanying foot injury (OR, 0.466; 95% CI, 0.263-0.828) were independently associated with injury severity (EMR-ISS ≥25) and intentionality of fall (OR, 0.722; 95% CI, 0.418-1.248) was not associated with injury severity. The incidence of forearm injuries was four (4.3%) and 58 cases (12.9%, P=0.018) and that of foot injuries was 20 (21.5%) and 54 cases (12.0%, P=0.015) in the intention versus non-intention groups, respectively. Conclusions: Among patients who fell from a similar height, age, and fall height were associated with severe fall-related injuries. Intentionality was not related to injury severity, and patients with foot injury were less likely to experience serious injuries. Injuries in the lower and upper extremities were more common in intentional and unintentional falls, respectively.

• Journal of the Korean Institute of Rural Architecture
• /
• v.25 no.4
• /
• pp.9-16
• /
• 2023

In this study, the status and characteristics of fine dust and its impact on neighboring areas were investigated to proactively respond to the government's environmental regulations expected in the future and to minimize the damage by the fine dust generated at construction waste intermediate treatment plants. In addition, since there are no such plants that can affect the surroundings with no houses or other waste treatment sites nearby, an independently located construction waste intermediate treatment plant was selected to compare the characteristics of fine dust with that from the construction waste intermediate treatment sites located in the downtown area. The conclusions of the study are as follows. (1) The measurement results of PM10 at 4 points in the plant showed that the location where the crushing facility was operating had an elevated level of fine dust at 80㎍/m³ on average and a maximum of 124㎍/m³, and the level rose to 110㎍/m³ at points where vehicles frequent. (2) The PM2.5 measurement results inside the plant showed that the average concentration of the reference point was 16㎍/m³ and the maximum value was 20㎍/m³, which was distributed within the management standard. (3) It was found that the average concentration of PM10 in the nearby area ranged from 28 to 38㎍/m³, which was similar to or lower than 36㎍/m³ of the reference point. Therefore, the concentration of the fine dust generated in the plant had a negligible effect on the increase in concentration of fine dust in nearby areas. (4) The heavy metal contents were measured from the filter paper collected from the plant. The PM10 was found to be about 14 to 26ng/m³, and PM 2.5 was 25 to 28ng/m³, which was the average of domestic atmospheric concentrations. (5) The SEM-EDX analysis results showed that the PM10 contained Si and O around 40% similarly for both. The SiO2, a component of silica occupied the most and C was present as CaCO3, which was assumed to be a limestone component. The remaining components included NaO, Al2O3, and CaO as trace oxides. (6) The SEM-EDX analysis results showed that the PM 2.5 contained 5 to 7% of Cl, which is a chlorine ion, and a small amount of K was detected at 2.51% in the sample from the shutdown plant.

• Journal of Life Science
• /
• v.18 no.8
• /
• pp.1106-1114
• /
• 2008

The antioxidants activities in water and 95% ethanol extracts of wa-song (Orostachys japonicus A. Berger) dried by sun, hot air and lyophilization were measured in vitro reaction system. In reaction system containing linoleic acid, the antioxidant activities against lipid oxidation enhanced in proportion to storage time. The antioxidant activity of ethanol extracts was higher than that of water extracts. In the drying methods, wa-song extracts showed higher antioxidant activity in the other of hot air-dried, lyophilized and sun-dried. The lipid oxidation system containing the promoting factors, such as $Fe^{+2}$ and $Cu^{+2}$ions, also showed that the ethanol extract of hot air-dried wa-song possessed the highest antioxidant activity. Soybean oil and lard being added with various levels (0.1, 0.5 and 1.0 g/100 g) of the ethanol extract of hot air-dried wa-song were stored at $60^{\circ}C$ (for 28 days) or $180^{\circ}C$ (for 48 hr). Its extract appeared to lower the acid value of soybean oil, wheras it failed to lower the acid value for lard at early storage time, but it was lower than control and BHT after 28 days. Anicidine value and peroxide value were lower soybean and lard added wa-song extract than control and BHT for storage for 28 days at $60^{\circ}C$. In 28 days, its value was significantly decreased in proportion to sample concentration. TBA value was increased during storage time at $60^{\circ}C$, but it was significantly decreased by sample concentration after storage 36 hours at $180^{\circ}C$ storage. Therefore results suggest ethanol extract of hot air-dried wa-song could be potential candidates for natural antioxidants for materials containing lipid.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.11
• /
• pp.1458-1464
• /
• 2007

This study was conducted to develope a new type of ready-to-eat smoked Sebastes schlegeli product with high acceptability and extended shelf-life. A Sebastes schlegeli was salted at 4% salt concentration for 6 hr at $4^{\circ}C$. The cold smoking conditions for the salted Sebastes schlegeli consisted of drying for 2 hr at $22{\sim}24^{\circ}C$ followed by smoking for 2 hr at $22{\sim}24^{\circ}C$. The warm smoking conditions for the salted Sebastes schlegeli consisted of drying for 2 hr at $22{\sim}24^{\circ}C$, smoking for 2 hr at $22{\sim}24^{\circ}C$, and smoking again for 30 min at $47{\sim}50^{\circ}C$. The rancidity of the smoked Sebastes schlegeli did not change after 1 year storage at $-20^{\circ}C$ by monitoring the iodine value, peroxide value, and acid value. The number of viable cells in the cold and warm smoked samples were counted as $7.4{\times}10^5$ and $6.2{times}10^5$ CFU/g, respectively. Viable cells were not detected after 1 year of storage at $-20^{\circ}C$. The sensory evaluations of the processed Sebastes schlegeli showed that elastic texture increased with smoking as compared to with salting. There were no significant differences between cold and warm smoking in terms of sweetness, elastic texture, color, and smoke flavor. However, for overall acceptability, preference were in the oder of cold smoked, warm smoked, and salted.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.4
• /
• pp.295-302
• /
• 2014

This study demonstrates a double-path CDI as an alternative of advanced wastewater treatment process. While the CDI typically consists of many pairs of electrodes connected in parallel, the new double-path CDI is designed to have series flow path by dividing the module into two stages. The CFD model showed that the double-path had uniform flow distribution with higher velocity and less dead zone compared with the single-path. However, the double-path was predicted to have higher pressure drop(0.7 bar) compared the single-path (0.4 bar). From the unit cell test, the highest TDS removal efficiencies of single- and double-path were up to 88% and 91%, respectively. The rate of increase in pressure drop with an increase of flow rate was higher in double-path than single-path. At 70 mL/min of flow rate, the pressure drop of double-path was 1.67 bar, which was two times higher than single-path. When the electrode spacing was increased from 100 to $200{\mu}m$, the pressure drop of double-path decreased from 1.67 to 0.87 bar, while there was little difference in TDS removal. When proto type double-path CDI was operated using sewage water, TDS, $NH_4{^+}$-N, $NO_3{^-}$-N and $PO_4{^{3-}}$-P removal efficiencies were up to 78%, 50%, 93% and 50%, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.647-656
• /
• 2017

Purpose: This study investigated the relationship between vitamin D level and dyslipidemia in Korean adults aged 19 years and older. The data for analysis were obtained from the sixth Korea National Health Nutrition Examination Survey 2013 and 2014. Result: This study showed that 74.4% of the specified adult population had vitamin D deficiency. Moreover, the prevalence of dyslipidemia was found to be 39.6% in the same population. Dyslipidemia differed significantly according to gender (p<0.001), age (p<0.001), smoking status (p<0.001), subjective health status (p<0.001), BMI (p<0.001), blood pressure (p<0.001), FBS (p<0.001), physical activity (p<0.001), and vitamin D level (p<0.001). When vitamin D deficiency was less than 20.0 ng/mL, there was a significant risk of dyslipidemia with an odds ratio of 1.29 (95% Cl, 1.11-1.51). The relationship between vitamin D level and a diagnosis index of dyslipidemia with controlled status of physical activity was statistically significant; in Korean adults, the odds ratio for total cholesterol was 1.41 (95% CI, 1.04-1.81) and for triglyceride was 1.36 (95% CI, 1.11-1.66). Conclusion: Our results showed the relationship between vitamin D level and dyslipidemia was significant in Korean adults, and total cholesterol and triglycerides, which are indicators of dyslipidemia, was significant. Future studies, such as a more systematic cohort study investigating the relationship between vitamin D level and dyslipidemia may be helpful in confirming the causal relationship between vitamin D and dyslipidemia.

• Reproductive and Developmental Biology
• /
• v.31 no.3
• /
• pp.199-205
• /
• 2007

The present study was carried out to assess the effect of superovulation response and efficiency of embryo production induced with injection of FSH dissolved in polyethylene glycol (PEG) in Hanwoo. Eighty-eight cows were divided into four groups. In group 1, cattle were intramuscularly treated with twice-daily administration of 50mg FSH for 4 days. Group 2 and 3 were subcutaneously single injection of 400mg and 200mg FSH dissolved in 30% PEG, respectively. Group 4 were subcutaneously single injection of 200 mg FSH dissolved in 30% PEG at 7 day after CIDR insertion. The number of corpus luteum (CL) in group 2 resulted in significantly (p<0.05) higher compared to group 1, 3 and 4 (18.5 vs. 11.2, 13.1 and 13.9, respectively). However, the number of total ova $(7.9{\sim}10.4)$, transferable embryos $(3.7{\sim}4.7)$, degenerate embryos $(1.9{\sim}3.5)$ and unfertilized ova $(1.8{\sim}2.7)$ did not differ among treatment groups. No difference was observed in pregnancy rate after transferring the recovered embryos among groups $(36.0{\sim}50.0%)$. In addition, blood progesterone concentrations at embryo recovery did not differ among all groups. In conclusion, although no differences were observed in the number of total ova, transferable embryos and pregnancy rate after transfer, a single injection of reduced dose of FSH (200mg FSH) at 7 day after CIDR insertion is more practical for superovulation treatments than frequent injection because of reduction of stress in Hanwoo and decreases of cost and laber.

• The Korean Journal of Nuclear Medicine
• /
• v.37 no.4
• /
• pp.219-228
• /
• 2003

Purpose: The amount of salvaged myocardium is an important prognostic factor in patients with acute myocardial infarction (MI). We investigated if early Tl-201 SPECT imaging could be used to predict the salvaged myocardium and functional recovery in acute MI after primary PTCA. Materials and Methods: In 36 patients with first acute MI treated with primary PTCA, serial echocardiography and Tl-201 SPECT imaging ($5.8{\pm}2.1$ days after PTDA) were performed. Regional wall motion and perfusion were quantified with on 16-segment myocardial model with 5-point and 4-point scaling system, respectively. Results: Wall motion was improved in 78 of the 212 dyssynergic segments on 1 month follow-up echocardiography and 97 on 7 months follow-up echocardiography, which were proved to be salvaged myocardium. The areas under receiver operating characteristic curves of Tl-201 perfusion score for detecting salvaged myocardial segments were 0.79 for 1 month follow-up and 0.83 for 7 months follow-up. The sensitivity and specificity of Tl-201 redistribution images with optimum cutoff of 40% of peak thallium activity for detecting salvaged myocardium were 84.6% and 55.2% for 1 month follow-up, and 87.6% and 64.3% for 7 months follow-up, respectively. There was a linear relationship between the percentage of peak thallium activity on early redistribution imaging and the likelihood of segmental functional improvement 7 months after reperfusion. Conclusion: Tl-201 myocardial perfusion SPECT imaging performed early within 10 days after reperfusion can be used to predict the salvaged myocardium and functional recovery with high sensitivity during the 7 months following primary PTCA in patients with acute MI.