• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.210-211
• /
• 2006

A series of L-LA polymerizations initiated by $Sn(Oct)_{2}\;([LA]_{0}/[Sn]_{0}=200)$ were carried out in scR22 at $130^{\circ}C$ and 300 bar, where $[LA]_{0}$ is the initial L-lactide concentration and $[Sn]_{0}$ is the initial $Sn(Oct)_{2}$ concentration. The reaction time dependences of monomer conversion and PLLA MW improved. The monomer conversion and PLLA MW increased with increasing reaction time. The effect of temperature on monomer conversion and PLLA MW was investigated in a series of polymerizations conducted at temperatures ranging from 90 to $150^{\circ}C$ and at a constant pressure of 200 bar. In all of these experiments, the ratio of monomer to R22 concentration was held constant at 12.4 wt.-%. Increasing the reaction temperature from 90 to $130^{\circ}C$ resulted in increased monomer conversion from 11.5 to 72.2 %.

• Journal of the Korean Ceramic Society
• /
• v.27 no.2
• /
• pp.211-218
• /
• 1990

CA2-based clinker with highly activated surface and hydraulic properties was synthesized at a comparatively lowr temperature than that of conventional synthesis by "hydration-burning method". This consists of calcining the mixture of CaCO3 and Al2O3 to obtain a primary clinker, hydrating the primary clinker and reburning the hydrates to obtain final clinker. Burning of primary clinker above 1200℃ was necessary to eliminate free CaO in it and to obtain it's solid hydrate. However, rising the burning temperature above 1300℃ is ineffective due to the decrease in hydraulic properties of the primary clinker with the temperature. Hydration of primary clinker at the elevated temperature(>35℃) was required to obtain the hydrate with more porous structure and final clinker with more active surface. CA2 was formed and increased with temperature at above 1150℃, finally became a primary phase of the final clinker. However, burning at the temperature above 1300℃ resulted in reverse effect on the hydraulic properties of the final clinker due to rapid decrease in it's surface area with the temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04a
• /
• pp.14-16
• /
• 2002

Melting and re-solidification nature of $SmBa_2Cu_3O_{7-y}$ (Sm123) grains in Ba-Cu-O (Ba:Cu=3:5) liquid containing 0.7 at.% yttrium were investigated at the temperature lower than its melt point. When Sm123 grains/liquid powder compacts were heated to a temperature between two melting points of Ba-Cu-O liquid ($1000^{\circ}C$) and a Sm123 phase ($1060^{\circ}C$) and held at this temperature for appropriate time, Sm123 grains melted partly in the liquid that was formed by melting of the liquid-forming powder. During subsequent slow cooling, (Sm,Y)$Ba_2Cu_3O_{7-y}$ solidified at the outer parts of the unmelted Sm12 grains, which is distinguished from the core regions by lower $Sm_2BaCuO_5$ (211) density.

• Nuclear Engineering and Technology
• /
• v.30 no.3
• /
• pp.202-211
• /
• 1998

Interfacial stresses at two-material interfaces and initial displacement field over the entire domain are obtained by modifying the potential energy functional with a penalty function, which enforces continuity of the stresses at the interface of two materials. Based on the initial displacement field and interfacial stresses, a new methodology to generate a continuous stress field over the entire domain has been proposed by combining the modified projection method of stress-smoothing and Loubignac's iterative method of improving the displacement field. Stress analysis is carried out on two examples made of dissimilar materials : one is a two-material cantilever composed of highly dissimilar materials and the other is a zirconium-lined cladding tube made of slightly dissimilar materials. Results of the analysis show that the proposed method provides an improved continuous stress field over the entire domain, and accurately predicts the nodal stresses at the interface, while the conventional displacement-based finite element method produces significant stress discontinuities at the interface. In addition, the total strain energy evaluated from the improved continuous stress field converges to the exact value in a few iterations.

• Korean Journal of Comparative Education
• /
• v.28 no.4
• /
• pp.107-135
• /
• 2018

This study examines the contents and characteristics of 'Double First Class University Plan', which is conceived by Chinese government in 2015, following the current 211, 985 projects to develop comprehensively a group of elite Chinese universities and individual university departments into world class universities and disciplines by the end of 2050. For this study, we used the literature analysis method and collected various policy documents, research papers, newspapers and books published in China regarding this plan. First, this study looks at the development process, performance and limitations of 211, 985 projects. Second, it defines the concept of the world class university mentioned in China, and looks at the objectives and highlights of the plan. Finally, this study summarizes the characteristics of 'Double First Class University Plan' and the results such as focusing on the university's tradition and characteristic, cultivation and attraction of human resources, intensive financial support, and the introduction of a competitive system. Based on the results, this study proposes several implications such as establishing and implementing long-term and comprehensive higher education policies, inducing local government participation and support, focusing on fostering talents and developing disciplines, and putting emphasis on Korean characteristics in developing world class universities.

• Korean Journal of Veterinary Service
• /
• v.41 no.3
• /
• pp.211-216
• /
• 2018

Heat stroke in a dog is a life-threatening syndrome characterized by a high body temperature over $41^{\circ}C$, by the central nervous system dysfunction, and by multiple organ dysfunction. A 11-month-old male American Pit Bull Terrier was presented to clarify the cause of death to diagnostic laboratory. This dog showed clinical signs such as high body temperature ($42^{\circ}C$), severe tachypnea, hematochezia, epistaxis and hemoptysis after transportation at hot summer time. At necropsy, there were hemorrhages in skin, serosa of stomach and small intestine, and also dark red fluid in lumen of intestine. Histopathologic examination revealed extensive hemorrhages in stomach, muscle, skin, and tongue. In microbiology, pathologic bacteria such as Pasteurella, Boedetella, Salmonella, Clostridium, and circulating virus in Korea such as CDV, CIV, CAV, CHV, CCV, CPIV were negative except CPV. There were many gross and microscopic lesions suggesting hest stroke while pathologic agents and related lesions were not detected. Therefore we diagnosed this case as heatstroke.

• Journal of Preventive Medicine and Public Health
• /
• v.30 no.1 s.56
• /
• pp.129-143
• /
• 1997

This study was carried out to assess the relationship between job characteristics(job strain) and psychosocial distress, and to find out the effect of social support on psychosocial distress. The study design was cross-sectional, and included 1,211 industrial workers in middle-sized city. A self-administered questionnaire measured job characteristics(jod demand, job control), and social support(coworker support, supervisor support) at work. Psychosocial distress was measured using PWI(Psychosocial Well-being Index), a 45-item self-administered instrument. Among the 1,211 respondents, the prevalence of psychosocial distress was 24.8% High job stram (high job demand + low job control) was present in 8% of the subjects. The crude odds ratio of high job strain was 4.76 (95% CI : 2.60-8.74), and those of active group and passive group were 3.81(95% CI : 1.82-3.95) and 2.64(95% CI : 1.77-3.94), respectively. The odds ratios of each group adjusted for sex, age, support, and religion were still significant. Our results supported the association between job strain and psychosocial distress. Social support at work, although significantly associated with psychosocial distress, did not modify the association between job strain and psychosocial distress.

• Journal of Korean Neurosurgical Society
• /
• v.58 no.3
• /
• pp.211-216
• /
• 2015

Objectives : Although surgical resection is used to treat meningeal hemangiopericytoma (MHPC), there is a high risk of subsequent recurrence. This study investigated factors associated with treatment outcomes and recurrence in patients who had undergone surgical resection of intracranial MHPC. Methods : Fifteen patients underwent surgical treatments performed by one senior neurosurgeon between 1997 and 2013. Clinical data, radiologic images, surgical outcomes, recurrence, and other relevant characteristics were reviewed and analyzed. Results : Fifteen patients were included in the analysis, 12 (80%) of whom had tumors in the supratentorial region, and 3 (20%) of whom had tumors in the infratentorial region. Complete resection was achieved in all 15 patients, and 3 (20%) patients were administered radiosurgery and conventional radiotherapy after surgery as adjuvant radiotherapy. Three patients developed recurrence, 2 of whom had not received adjuvant radiotherapy. In 1 of the patients who had not received adjuvant radiotherapy, recurrence developed at the original tumor site, 81 months after surgery. The other 2 recurrences occurred at other sites, 78 and 41 months after surgery. The 5- and 10-year overall survival rates were 88.3%, while the 5- and 10-year recurrence-free survival rates were 83% and 52%, respectively. Additionally the mean Ki-67 index differed significantly between patients who did and did not develop recurrence (43% vs. 14%; p=0.001). Conclusion : Because of the high risk of MHPC recurrence, MHPC tumors should be completely resected, whenever feasible. However, even when complete resection is achieved, adjuvant radiotherapy might be necessary to prevent recurrence.

• Tribology and Lubricants
• /
• v.22 no.4
• /
• pp.211-217
• /
• 2006

Ring and groove wear may not be a problem in most current automotive engines. However, a small change in ring face and groove geometry can significantly affect the lubrication characteristics and ring axial motion. This in turn can cause to change inter-ring pressure, blow-by and oil consumption in an engine. Therefore, by predicting the wear of piston ring face, ring groove and cylinder bore altogether, the changed ring end gap and the changed volume of gas reservoir can be calculated. Then the excessive oil consumption can be predicted. Being based on the calculation of gas flow amount by the theory of piston ring dynamics and gas flow, and the calculation of oil film thickness and friction force by the analysis of piston ring lubrication, the calculation theory of oil amount through top ring gap into combustion chamber will be set. This is estimated as engine oil consumption. Furthermore, the wear theories of ring, groove and cylinder bore are included. Then the each amount of wear is to be obtained. The changed oil consumption caused by the new end gap and the new volume of oil reservoir around second land, can be calculated at some engine running interval. Meanwhile, the wear amount and oil consumption occurred during engine durability cycle are compared with the calculated values. Next, the calculated amount of oil consumption and wear are compared with the guideline of each part's wear and oil consumption. So, the timing of part repair and engine life cycle can be predicted in advance without performing engine durability test. The wear data of rings and grooves are obtained from three engines before and after engine durability test. The calculated wear data of each part are turn out to be at the lower bound of aver-aged test values or a little below.

• The Korean Journal of Physiology and Pharmacology
• /
• v.18 no.3
• /
• pp.211-216
• /
• 2014

Endoplasmic reticulum (ER) stress, unfolded protein response (UPR), and mitochondrial biogenesis were assessed following varying intensities of exercise training. The animals were randomly assigned to receive either low- (LIT, n=7) or high intensity training (HIT, n=7), or were assigned to a control group (n=7). Over 5 weeks, the animals in the LIT were exercised on a treadmill with a $10^{\circ}$ incline for 60 min at a speed of 20 m/min group, and in the HIT group at a speed of 34 m/min for 5 days a week. No statistically significant differences were found in the body weight, plasma triglyceride, and total cholesterol levels across the three groups, but fasting glucose and insulin levels were significantly lower in the exercise-trained groups. Additionally, no statistically significant differences were observed in the levels of PERK phosphorylation in skeletal muscles between the three groups. However, compared to the control and LIT groups, the level of BiP was lower in the HIT group. Compared to the control group, the levels of ATF4 in skeletal muscles and CHOP were significantly lower in the HIT group. The HIT group also showed increased PGC-$1{\alpha}$ mRNA expression in comparison with the control group. Furthermore, both of the trained groups showed higher levels of mitochondrial UCP3 than the control group. In summary, we found that a 5-week high-intensity exercise training routine resulted in increased mitochondrial biogenesis and decreased ER stress and apoptotic signaling in the skeletal muscle tissue of rats.