• 임상간호연구
• /
• 제20권2호
• /
• pp.211-222
• /
• 2014

Purpose: This study was done to identify the effects of Laughter therapy on recovery status from facial paralysis, pain, and stress in Bell's palsy patients. Methods: This research was a nonequivalent control group non-synchronized pre-posttest quasi-experimental research design. Data were collected from August 8, to October 15, 2013 at D university Oriental Medical Center in B city. Participants were 60 patients with Bell's palsy who were assigned to one of two groups: an experimental group of 30 patients and a control group of 30 patients. t-test, $x^2-test$, Fisher's exact test and Welth-Aspin test were used to test the homogeneity between the two groups and t-test, Welth-Aspin test and ANCOVA were used to test the research hypotheses. SPSS program was used for statistical analysis. Results: There were significant increases in recovery status from facial paralysis and decreases in stress after Laughter therapy in the experimental group. Conclusion: The results indicate that Laughter therapy is effective in facilitating recovery status from facial paralysis and decreasing stress. Therefore, Laughter therapy can be used as an effective nursing intervention for patients with facial paralysis and to relieve stress in these patients.

• Journal of Gastric Cancer
• /
• 제14권3호
• /
• pp.211-214
• /
• 2014

We report our experience of a concurrent robot assisted distal gastrectomy and partial nephrectomy for synchronous early gastric cancer and renal cell carcinoma. A 55-year-old female patient was diagnosed with early gastric cancer on screening endoscopy. Abdominal computed tomography showed an incidental right renal cell carcinoma. Robot assisted distal gastrectomy was performed, followed by partial nephrectomy. The final pathological examination showed signet ring cell carcinoma within the lamina propria and renal cell carcinoma with negative resection margins. The patient showed no evidence of recurrence at 6-months. A robot-assisted combined operation could be a treatment option for early stages of synchronous malignancies.

• 한국인터넷방송통신학회논문지
• /
• 제17권6호
• /
• pp.211-216
• /
• 2017

XML은 데이터의 표현 및 교환의 사실상 표준으로 자리 잡고 있으며, XML 자체가 데이터를 저장, 관리하기 위한 구조로 되어있지만, 다양하고 복잡한 표현으로 인해 문서 구조를 한 눈에 파악하기에는 어려운 점이 있어 개념적 모델의 도구로 사용하기 적절하지 못한 점이 있다. 본 논문은 XML 스키마 문서 구조를 보다 쉽게 이해할 수 있도록 개념적 모델로 변환하는 기법을 제안한다. 이를 위해 개념적 모델 도구로 사용한 CMXML을 기술하고, XML 스키마 구조를 CMXML 다이어그램으로 변환하기 위한 변환 규칙과 자료구조를 제시한다. 변환절차는 XML 스키마 문서를 입력받아 본 연구에서 제안하는 변환기법을 적용하여 CMXML 다이어그램을 생성한다.

• Carbon letters
• /
• 제16권3호
• /
• pp.211-214
• /
• 2015

Bio-imaging and drug carriers for delivery have created a huge demand for crystals. Crystals are fascinating materials that have been grown for a long time but obtaining biocompatible fluorescent crystals is a challenging task. We report on the growth of fluorescent crystals using a carbon dot (C-dot) solution by a hydrothermal process. The crystallization pattern of these C-dots exhibited a unique dendritic structure having a feather-like morphology. The growth temperature and pressure were maintained at 60℃ and 200 mmHg, respectively, for crystal growth. A green fluorescence (under UV light) that was observed in the C-dot solution was retained in the crystals formed from the solution. Cytotoxicity studies on Vero cells revealed the crystals to be extremely biocompatible. These fluorescent crystals are extremely well suited for biomedical and optoelectronic applications.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1516-1518
• /
• 1998

$YBa_2Cu_3O_x$(Yl23) Superconducting thick films on $Y_2BaCuO_5$(Y211) substrate were Prepared by surface diffusion process between $BaCuO_2$+CuO composite coating powder and a Y2ll substrate. X-ray diffraction shows that the Yl23 layer onto Y2ll substrate is the orthorhombic crystal structure. The specimen heated at $940^{\circ}C$ for 2h showed the maximum $J_c$ fo 500A/$cm^2$. Based on optimal condition, the superconducting fault current limiter(FCL) having a current limiting area 1mm wide and 66mm long was fabricated on Y211 substrate. A typical current limiting waveform was measured. When a voltage of 3V was applied, the fault current with a peak of 15A was limited to about 0.11A.

• 대한토목학회논문집
• /
• 제31권3B호
• /
• pp.211-220
• /
• 2011

본 연구에서는 유역 물수지 모의를 위한 개념적인 토양수분모형이 제안된다. 모형은 지표면에 떨어지는 강수량이 지표면 유출, 습윤, 기화, 침루 등으로 분할되는 과정을 모의한다. 경험식으로 추정된 연별 기화량, NRCS-CN 방법으로 추정된 월별 습윤량 및 이 두 가지가 모두 주어진 경우를 구분하여 모형의 매개변수가 각각 추정되어 모형의 성능을 평가한다. 연별 기화량과 월별 습윤량 자료 모두가 모형 보정에 적용될 경우만이 보다 합리적인 강수분할이 모의될 수 있음이 분석된다.

• Progress in Superconductivity
• /
• 제5권2호
• /
• pp.132-135
• /
• 2004

We fabricated YBCO thick films by using a screen printing method with $Y_2$BaCuO$_{5}$(Y211) and BaCO$_3$ powders on Cu-substrate in $N_2$ atmosphere. Cu-sheathed YBCO thick film process is more simple and economic than YBCO coated conductor methods. The heat treatment is performed in the range of 860 - 875 $^{\circ}C$ for 5 min in the tube furnace of $N_2$ atmosphere. The flow rate of $N_2$ gas is fixed 60 $m\ell$/min. Microstructure and phases of thick films were investigated by optical microscope, X-ray diffraction(XRD) and SEM. At heat-treatment temperature, the thick films were partially melted by liquid reaction between CuO of oxidized copper substrate and the powders screen-printed on Cu-sheath. During the heat-treatment procedure, YBCO superconducting grains nucleate.e.

• Advances in Computational Design
• /
• 제2권3호
• /
• pp.211-223
• /
• 2017

This research presented a numerical and experimental study on the seismic performance of first-generation base-isolated and fixed-base nuclear power plants (NPP). Three types of the base isolation system were applied to rehabilitate the first-generation nuclear power plants: frictional pendulum (FP), high-damping rubber (HDR) and lead-rubber (LR) base isolation. Also, an Excel program was proposed for the design of the abovementioned base isolators in accordance with UBC 97 and the Japan Society of Base Isolation Regulation. The seismic assessment was performed using the pushover and nonlinear time history analysis methods in accordance with the FEMA 356 regulation. To validate the adequacy of the proposed design procedure, two small-scale NPPs were constructed at Universiti Teknologi Malaysia's structural laboratory and subjected to a pushover test for two different base conditions, fixed and HDR-isolated base. The results showed that base-isolated structures achieved adequate seismic performance compared with the fixed-base one, and all three isolators led to a significant reduction in the containment's tension, overturning moment and base shear.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2011년도 학술발표회
• /
• pp.211-211
• /
• 2011

근래에 들어 환경문제의 사회적 부각과 함께 생태파괴적인 하천 정비 방식에 대한 대안으로 자연형 하천 환경 복원기법에 대한 시험 적용이 활발하게 진행되고 있다. 그러나 하천 복원에 앞서 하천 환경의 상태를 파악하고 진단할 수 있는 방법에 대한 연구가 미흡한 실정이다. 기존에 개발된 하천 질 평가 방법은 수질에 편향된 경향이 있으나 수질의 개선만으로는 생물 다양성의 발생 기반으로서 물리적 구조가 훼손된 상태에서는 생태적 복원의 효과를 달성하기 어렵다. 따라서 하천의 물리적 조건에 의한 구체적이고 비교적 객관적인 평가가 필요하며, 본 연구에서는 상기 평가를 바탕으로 작성된 하천 자연도 평가 지침에 의거하여 곡릉천 하류 일부 구간과 곡릉천의 지류인 벽제천을 대상으로 자연도를 조사하였다. 평가 결과 곡릉천 봉일천교 상류 2km구간의 저수로는 사행을 보였으며, 강변 사주 및 하중도는 없었으나 갈대 등과 같은 저수로변 식생이 있고 흙으로 조성된 인공제방으로 되어 있어 도심지의 정형화된 하천들에 비해 비교적 자연에 가까운 모습을 하고 있었다. 한편 하천 인근에 있는 아파트 등 주거지와 논, 밭 등의 경작지로 인한 오염원 유입 및 자전거 도로와 산책로 등 사람의 접근이 용이한 제외지의 이용으로 동식 물서식처로서의 기능이 저하될 것으로 우려된다. 곡릉천의 지류인 벽제천은 저수로가 사행을 유지하고 하중도와 사주가 형성되어 있으며 여울을 확인할 수 있었다. 하천 인근에 경작지와 제방도로가 있으나 인적이 드물고 차량 통행량이 적어 생태환경 훼손에 대한 우려는 적은 것으로 판단되 었다.

• Journal of Biosystems Engineering
• /
• 제34권4호
• /
• pp.211-219
• /
• 2009

In the process of oyster mushroom production, loading work of culture medium needs the most intensive labor power and cost. Therefore, the development of culture medium loading machine causes to reduce the manpower and cost. The main objectives of this study are identify cultivating environment, physical properties of culture medium and to make an element design of culture medium loading machine. The results are summarized as follows: 1. The moisture content and density of popularly used culture medium were 70%(w.b), $26\;kg/m^3$, respectively. 2. Pressure of the blower increased as the impeller speed increased, and the opening ratio of pressure controller decreased. 3. Recommendable c1earance(${\delta}$) between an impeller plate and a blower case was 25 mm at an impeller speed of 3183 rpm 4. Discharge device of type B with a hopper and suit was better than type A with a hopper.