• 한국정밀공학회지
• /
• 제15권11호
• /
• pp.121-129
• /
• 1998

In-plane ESPI(Electronic Speckle Pattern Interferometry) was devised to measure in-plane deformations and rotation of a specimen with laser in this study. ESPI is a optical measuring method to be able to measure the deformations of engineering components and materials in industrial fields. The conventional measuring methods of surface deformations such as the strain gauge have many demerits because they are contact and point-to-point measuring ones. But that ESPI is noncontact, nondestructive and whole field measuring method can overcome previous disadvantages. We used ESPI which is sensitive to in-plane displacement for measuring in-plane deformations of a disk. And the 4-frame phase shifting method was used for the quantitative analysis. First of all, the system calibration was done due to an in-plane rotation before getting deformations of a disk. Finally we showed good agreement between the experiment results and those of the FEA(Finite Element Analysis).

• International journal of advanced smart convergence
• /
• 제12권1호
• /
• pp.120-129
• /
• 2023

Perspective taking, one's knowledge of their own mental and emotional states and inferences about others' mental and emotional states, is an important higher order cognitive skill required in successful writing. However, there has not been much research on the identification and examiantion of the psychometrics of perspective taking. To fill in this gap, I reviewed the psychological and cognitive frameworks of perspective taking including theory of mind, audience awareness, development of epistemological understanding, and argumentation schema. I also reviewed various methods of examining the psychometric properties of perspective taking in written composition, including both manual and computational approaches. The review of literature yielded suggestions on the development of manual coding scheme for perspective taking as well as the selection of indexes to draw from natural language processing tools. Challenges and affordances of combining the manual and computational approach are discussed along with future research directions to advance the field of psycholinguistics.

• Journal of Power Electronics
• /
• 제5권2호
• /
• pp.129-141
• /
• 2005

A high-performance robust hybrid speed controller for a permanent-magnet synchronous motor (PMSM) drive with an on-line trained neural-network model-following controller (NNMFC) is proposed. The robust hybrid controller is a two-degrees-of-freedom (2DOF) integral plus proportional & rate feedback (I-PD) with neural-network model-following (NNMF) speed controller (2DOF I-PD NNMFC). The robust controller combines the merits of the 2DOF I-PD controller and the NNMF controller to regulate the speed of a PMSM drive. First, a systematic mathematical procedure is derived to calculate the parameters of the synchronous d-q axes PI current controllers and the 2DOF I-PD speed controller according to the required specifications for the PMSM drive system. Then, the resulting closed loop transfer function of the PMSM drive system including the current control loop is used as the reference model. In addition to the 200F I-PD controller, a neural-network model-following controller whose weights are trained on-line is designed to realize high dynamic performance in disturbance rejection and tracking characteristics. According to the model-following error between the outputs of the reference model and the PMSM drive system, the NNMFC generates an adaptive control signal which is added to the 2DOF I-PD speed controller output to attain robust model-following characteristics under different operating conditions regardless of parameter variations and load disturbances. A computer simulation is developed to demonstrate the effectiveness of the proposed 200F I-PD NNMF controller. The results confirm that the proposed 2DOF I-PO NNMF speed controller produces rapid, robust performance and accurate response to the reference model regardless of load disturbances or PMSM parameter variations.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 춘계학술대회
• /
• pp.45-48
• /
• 1996

In the case of $^{123}I$ from the $^{124}Te$ (p,2n)reaction, the radionuclidic impurity is the high-energy gamma-emitting $^{124}I$, which interferes greatly with nuclear medicine images. The choice of a collimator can affect the quality of clinical SPECT images of [I-123]MIBG or [I-123]TPT. The tradeoffs that two different collimators make among spatial resolution, sensitivity, and scatter were studied by imaging a line source at 5cm, 10cm, 15cm distance using a number of plexiglass sheets between source and collimator, petri dist two-dimensional Hoffman brain phantom, and Jaszczak phantom after filling with $^{123}I$ (FWHM, FWTM, Sensitivity) for low energy ultra high resolution parallel hole(LEUHRP) collimator and medium energy general purpose (MEGP) collimator were measured as (9.27mm, 61.27mm $129CPM/[\mu}$ Ci) and (10.53m 23.17mm $105CPM/{\mu}$ Ci), respectively. The image quality of two-dimensional Hoffman brain Phantom with LEUHRP looked better than the one with MEGP. However, the image quality of Jasgczak phantom with LEUHRP looked much worse than the one with MEGP, The results suggest that the MEGP is preferable to LEUHRP for SPECT studies of [I-123]MIBG or [I-123]IPT.

• 기본간호학회지
• /
• 제22권2호
• /
• pp.129-138
• /
• 2015

Purpose: This paper is a basic study done to establish spiritual health concepts according to Korean culture. The focus was on identifying perceived concepts of spiritual health in Korean people. Methods: The Q method, which is effective in measuring individual subjectivity, was used in this study. Results: Perception of the concept of spiritual health was found to have 3 independent types, Type I is a self-directed, present life centered type. This is a group stressing the importance of planning self-directed life and the people of this group consider the values of the present life as important. Type II is a faith-oriented, afterlife centered type. This is a group whose essence of spiritual health is religious devotion like faith in god and the people of this group do not sympathize with the oriental world view. Type III is an oriental, value-sharing type. This is a group with an oriental world view and the people of this group stress importance in sharing values with communities or others. Conclusion: These results not only become the basis for understanding the concept of spiritual health among Koreans, but also suggest the necessity of comprehensive education for spiritual health promotion.

• 한국음향학회지
• /
• 제30권3호
• /
• pp.129-135
• /
• 2011

An algorithm is presented for estimating the 3-D location (i.e., azimuth angle, elevation angle, and range) of multiple sources with a uniform circular array (UCA) consisting of an even number of sensors. Recently the rank reduction (RARE) algorithm for partly-calibrated sensor arrays was developed. This algorithm is applicable to sensor arrays consisting of several identically oriented and calibrated linear subarrays. Assuming that a UCA consists of M sensors, it can be divided into M/2 identical linear subarrays composed of two facing sensors. Based on the structure of the subarrays, the steering vectors are decomposed into two parts: range-independent 2-D direction-of-arrival (DOA) parameters, and range-relevant 3-D location parameters. Using this property we can estimate range-independent 2-D DOAs by using the RARE algorithm. Once the 2-D DOAs are available, range estimation can be obtained for each source by defining the 1-D MUSIC spectrum. Despite its low computational complexity, the proposed algorithm can provide an estimation performance almost comparable to that of the 3-D MUSIC benchmark estimator.

• 천문학논총
• /
• 제26권3호
• /
• pp.129-140
• /
• 2011

In this paper, we have studied Sogyupyo (小圭表, small noon gnomon) of the Joseon dynasty. According to the Veritable Records of King Sejong (世宗, 1418 - 1450), Daegyupyo (大圭表, large noon gnomon) with a height of 40-feet [尺] was constructed by Jeong, Cho (鄭招) and his colleagues in 1435, and installed around Ganuidae (簡儀臺, platform of Ganui). On the contrary, the details of Sogyupyo are unknown although the shadow length measurements by Daegyupyo and Sogyupyo are found on the Veritable Records of King Myeongjong (明宗, 1545 - 1567). By analysing historical documents and performing experiments, we have investigated the construction details of Sogyupyo including its development year, manufacturer, and installation spot. We have found that Sogyupyo would be manufactured by King Sejong in 1440 and placed around Ganuidae. And Sogyupyo would be five times smaller than Daegyupyo, i.e., 8-feet. On the basis of experiments, we suggest that although it is smaller, Sogyupyo was equipped with a bar [橫梁] and a pin-hole projector [影符] like Daegyupyo in order to produce the observation precision presented in the Veritable Record of King Myeongjong.

• 한국IT서비스학회지
• /
• 제16권2호
• /
• pp.129-138
• /
• 2017

This paper is concerned with an Internet of Things (IoT)-based unmanned home-delivery box system, in which the system is developed with a prototype using a weight sensor, shock sensor, the Arduino and Raspberry-Pi of open-source hardware platforms. The developed system provides several functions such as a safe storage means, prevention of delivery-theft, and remote control of the home-delivery box, etc. Specifically, the system recognizes the arrival of goods by detecting the weight of deliveries and sends the arrived message of deliveries to the recipient' smartphone, and also controls (i.e., open and close) the locker of the unmanned home-delivery box system remotely with the smartphone. Furthermore, the developed system provides automatically a warning alarm around the unmanned home-delivery box when an external shock is applied to the home-delivery box, and sends a message on the shock to the recipient' smartphone. The major functions of the developed home-delivery box system have been verified in a realistic environment, and confirmed to work well. With the application of the developed home-delivery box system to the homes and offices where recipients are always not to stay, it is expected to significantly improve the safety of delivered goods as well as to effectively prevent the delivery operatives posing as a crime.

• 한국치위생학회지
• /
• 제13권1호
• /
• pp.129-135
• /
• 2013

Objectives : The purpose of this study was to attempt to lay the foundation for the development of oral health programs geared toward promoting the oral health of low socioeconomic class children. Methods : The subjects of this study have been investigated for the use of children to 96 local children's center. Questionnaire for research purposes are described in more detail under the coordination of child care teachers to students, students to be able to record. The survey was conducted at the Health center. Analyzed the data collected by SPSS 18.0. Results : The findings of the study were as follows: The children were influenced by habits of having a snack in dental caries experience. Higher intake of bread and a lot of children more probability of dental caries experience. I've found a lot of sweet-food intake eleven cakes or fruits and vegetables that children prefer higher dental caries experience was low. Conclusions : Education on dietary behavior for low-income children was necessary because of the high correlation of the relationship between dietary habits and dental caries and diet.

• 한국초지조사료학회지
• /
• 제28권2호
• /
• pp.129-138
• /
• 2008

Demand for alternatives to petroleum is increasing the production of biofuels from food crops such as corn, soybeans, sorghum and sugarcane, etc. At least for the next 5 years, ethanol demand will be increased greatly in the United States and in the world. Presently, most ethanol produced in the United States is corn (Zea mays) ethanol. As a result, especially in the Americas and Southeast Asia, agricultural land is diverted to biofuel production. Even though biofuel industry has many advantage including national security, economical, energetical and sustainable impacts, it is driving grain prices up and creating considerable concern about the potential negative impacts on a wide range of food products that depend on gain : chicken, pork, beef, and dairy products such as milk, cheese, yoghurt, cream and ice cream. Feedstock crops are crops such as switchgrass(Panicum virgatum, L.), corn stover and grasses that can be used in industrial processes such as fermentation into alcohol fuels. Feedstock is no compete with food. Furthermore it is friendly environmental bioenergy crops. In Korea, with increasing demand for fossil fuels the exploration of alternative sources of liquid fuel is inevitable. I suggest Korea need to research and to develop actively on feedstock for biofuel production through this review.