• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권7호
• /
• pp.347-351
• /
• 2004

The $ZnNb_2O_{6}$ ceramics with CuO(1, 3, 5wt%) were prepared by the conventional mixed oxide method. The ceramics were sintered at the temperature of $950^{\circ}C$∼$1075^{\circ}C$ for 3hr in air The structural properties and the microwave dielectric properties of $ZnNb_2O_{6}$ ceramics were investigated with sintering temperature and the addition of CuO. Increasing the addition of CuO, the peak of second phase($Cu_3Nb_2O_{8}$) was increased. The grain size of the $ZnNb_2O_{6}$ ceramics with CuO was increased with CuO addition at same temperature. The dielectric constant of $ZnNb_2O_{6}$ ceramics with CuO was increased with sintering temperature and CuO addition. While the quality factor of the $ZnNb_2O_{6}$ ceramics with lwt% CuO depended on sinterability, the quality factor of $ZnNb_2O_{6}$ with 3wt% and 5wt% CuO depended on second Phase due to the CuO addition. The optimum dielectric Properties of $\varepsilon$$_{r}$ = 21.73 Q${\times}$f = 19,276 were obtained from the condition of 3wt% CuO addition and sintering temperature of $1025^{\circ}C$(3hr).

• Transactions on Electrical and Electronic Materials
• /
• 제5권3호
• /
• pp.109-112
• /
• 2004

In this study, in order to develop the low temperature sintering ceramics for ultrasonic vibrator, Pb(Sb$\_$$\frac{1}{2}$/Nb$\_$$\frac{1}{2}$/) O$_3$-Pb(Ni$\_$1/3/Nb$\_$2/3/)O$_3$-Pb(Zr$\_$0.48/Ti$\_$0.52/)O$_3$ ceramics were manufactured as a function of the amount of CuO addition, and their dielectric and piezoelectric characteristics were investigated. With increasing CuO addition, the grain size and density increased up to 0.3 wt% CuO addition. Taking into consideration electromechanical coupling factor(k$\_$p/) of 0.53, mechanical quality factor(Q$\_$m/) of 423, dielectric constant($\varepsilon$$\_$r/) of 1,759 and piezoelectric constant(d$\_$33/) of 362pC/N, it could be concluded that 0.5 wt% CuO added composition ceramic sintered at 920$^{\circ}C$ was suitable for ultrasonic vibrator application.

• 한국분말재료학회지
• /
• 제14권1호
• /
• pp.38-43
• /
• 2007

Cu-Zn alloy nano powders were fabricated by the electrical explosion of Zn-electroplated Cu wire along with commercial brass wire. The powders exploded from brass wire were composed mainly of ${\alpha},{\beta},\;and\;{\gamma}$ phases while those from electroplated wires contained additional Zn-rich phases as ${\varepsilon}$, and Zn. In case of Zn-elec-troplated Cu wire, the mixing time of the two components during explosion might not be long enough to solidify as the phases of lower Zn content. This along with the high vapor pressure of Zn appears to be the reason for the observed shift of explosion products towards the high-Zn phases in electroplated wire system.

• Journal of Welding and Joining
• /
• 제23권6호
• /
• pp.93-98
• /
• 2005

The purpose of this study is to investigate the characteristics of pb-free $Zn-(3\~6)\%Al-(1\~6)\%Cu$ solder alloys for ultra high temperature(>573K) which applied to air craft, space satellite, automotive, oil, gas well exploration and data logging of geo-thermal wells. Melting range, solderability, electric resistivity, microstructure and mechanical properties were examined with solder alloys casted in Ar gas atmosphere. $Zn-4\%Al-(1\~3)\%Cu,\;Zn-5\%Al-(2\~4)\%Cu\;and\;Zn-6\%Al-(3\~5)\%Cu$ alloys satisfied the optimum melting range of 643 to 673k for ultra high temperature solder. A melting temperature increased with increasing Cu content, but decreased with increasing Al content. The spreadability was improved with increasing hi content. But the content of Cu had no effect on the spreadability. The electric resistivity was lowered with increasing Al and decreasing Cu content. In all Zn-Al-Cu solder alloys, primary dendritic $\varepsilon$ phase(Zn-Cu), dendritic $\eta$ phase(Zn-Cu-Al), $\alpha(Al-Zn)-\eta$ eutectic and eutectoid phase were observed. The addition of Al increased the volume fraction of eutectic and eutectoid phase and it decreased f phases. Also, the addition of Cu increased slightly the volume fraction of e, the eutectic and eutectoid phases. With increasing total content of Al and Cu, a hardness and a tensile strength were linearly increased, but anelongation was linearly decreased.

• 한국재료학회지
• /
• 제5권1호
• /
• pp.22-35
• /
• 1995

본 연구는 Mn-Al 합금계에서 $\tau$상의 분율이 가장 높은 기준 조성을 결정하고 이 기준 조성중 Mn 원자의 일부를 Cu와 Fe 원자로 치환하였을 때 $\tau$상의 안정성과 자기적 성질의 변화를 조사하엿다. Mn-Al 합금계에서 $\tau$상의 분률과 자기적 특성이 가장 높은 조성은 $Mn_{0.56}Al_{0.44}$이었다. $Mn_{0.56-X}M_{X}Al_{0.44}$ 합금계의 결정구조는 M=Cu의 경우, 노냉시편과 소둔시편은 x $\leq$ 0.08 범위에서 $\tau$상과 $\beta$-Mn상이 나타났고, 0.10 $\leq x \leq$ 0.12 범위에서는 $\tau$상과 $\kappa$상이 나타났으며, 0.15 $\leq$ 0.20 범위에서는 $\kappa$상만이 존재하였다. 급속응고시편은 x=0.04에서 $\varepsilon$상과 $\tau$상이 공존하였고, x=0.06 및 x=0.08에서는 $\kappa$상과 $\tau$상이 공존하였으며 x=0.12와 x=0.20에서는 $\kappa$ 상만이 존재하였다. M=Fe의 경우, 노냉시편은 x < 0.08 범위에서 $\tau$상, $\beta$-Mn상 및 $\gamma_{2}$상이 나타났고, x > 0.10 범위에서는 $\kappa$상과 $\beta$-Mn$상이 나타났다. 급속응고시편은 x $\leq$ 범위에서는 $\varepsilon$상과 $\gamma_{2}$상이 나타났지만, 미량의 $\tau$상과 $\kappa$상도 존재함을 알 수 있었다. X=0.12와 x=0.20에서는 $\kappa$상만이 존재하엿다. $Mn_{0.56}Al_{0.44}$ 합금에서 노냉시편과 소둔시편의 포화자화값은 40-45(emu/g)이었으며 curie 온도는 약 650K였다. 급속응고 시편의 포화자화값은 약 50-52(emu/g), Curie 온도는 약 644K엿다. 소둔시편 및 급냉리본 모두 큰 잔류자화/포화자화 비(~0.7)를 나타냈으며, 특히 급냉리본의 경우 77K에서 큰 잔류자화값(~48emu/g)을 보여주었다. $Mn_{0.56-X}M_{X}Al_{0.44}$ 합금계의 자기장에 따른 자화값의 변화는 강자성이 형태를 보여주었고 자화값은 강자성과 $\tau$상과 $\kappa$상의 분율에 따라 결정되며 M=Cu일때, 최대자발자화값은 x=0.15에서 약 64.5(emu/g)이었다. M=Fe일 때 자화값은 x=0.15에서 최대자발자화값($\sigma_{0.0}$=66.4emu/g)이 나타났으며 $\tau$상 영역에서의 값보다 높았다. Curie 온도는 M=Cu, Fe에 관계없이 x가 증가함에 따라 감소하였다.

• 한국재료학회지
• /
• 제6권5호
• /
• pp.532-539
• /
• 1996

동과 동을 저온에서 단시간내에 접합시키는 가능성을 검토하기 위해서 직류 자기 스퍼터링을 이용한 코팅한 주석 및 주석-잡 합금층을 중간층으로 사용하였다. 접합은 대기중 200-35$0^{\circ}C$의 온도에서 수행되었고 접합온도에 도달직후 바로 냉각하였다. 접합 계면에는 액상의 주석과 고상의 동간의 반응에 의해 n-상(Cu6Sn5) 및 $\varepsilon$-상(Cu3Sn)으로 구성된 금속간화함물 층이 형성되었다. 전단강도로 측정된 접합강도는 접합온도에 따라 비례적으로 증가하지만 30$0^{\circ}C$ 이상에서 감소하였다. 접합강도는 2.8-6.2MPa 범위로 나타났으며, 중간층합금 성분에 따른 접합계면에서의 금속간화합물의 생성거동과 관련지어 설명되었다. 실험결과 실용적인 접합법으로서 저온 단시간 접합의 가능성이 확인되었다.

• 대한화학회지
• /
• 제15권6호
• /
• pp.378-384
• /
• 1971

A new analytical reagent 8-(p-ethylbenzenesulfonamido)quinoline(EBSQ) has been synthesized, and identified its structure. EBSQ forms copper chloroform-soluble complex in a basic solution (pH = 7.5∼10.5). The other optimum conditions for the spectrophotometric study of Cu-EBSQ have been established at 380 $m{\mu}$. Beer's law is followed in the concentration range of 0~44.5 ${\mu}g$ per 10 ml of chloroform. The composition of complex has been found to be $Cu(EBSQ-H)_2$and the over-all instability constant is calculated to be $1.22{\times}10^{-7}$. The absorption coefficient of the $Cu(EBSQ-H)_2$ complex is ${\varepsilon}$ = 15,800.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.160-161
• /
• 2009

In this study, in order to develop the lead free piezoelectric ceramics with excellent piezoelectric properties, (Na,K)$NbO_3$ ceramics according to the amount CuO addition were fabricated using a conventional mixed oxide process and their piezoelectric and dielectric characteristics were investigated. At the 0.8mol% CuO added composition, density, electromechanical coupling factor(kp), echanical quality factor(Qm), dielectric constant$(\varepsilon_r$) and piezoelectric constant($d_{33}$) showed the optimum value of $4.459g/cm^3$, 0.469, 540, 410, 69.57pC/N, respectively.

• 한국전기전자재료학회논문지
• /
• 제23권5호
• /
• pp.379-382
• /
• 2010

In this study, in order to develop the lead-free piezoelectric ceramics with high piezoelectric and dielectric properties, $(K_{0.5}Na_{0.5})(Nb_{0.97}Sb_{0.03})O_3$ ceramics were fabricated using a conventional mixed oxide process and their piezoelectric and dielectric characteristics were investigated according to the $K_{5.4}Cu_{1.3}Ta_{10}O_{29}$ addition. $K_{5.4}Cu_{1.3}Ta_{10}O_{29}$ addition enhanced density, electromechanical coupling factor($k_p$) piezoelectric constant $d_{33}$ and mechanical quality factor($Q_m$). At the 0.9 mol% $K_{5.4}Cu_{1.3}Ta_{10}O_{29}$ addition, density, electromechanical coupling factor($k_p$), dielectric constant(${\varepsilon}_r$) and piezoelectric constant($d_{33}$) of specimen showed the optimum values of 0.46, 471, and 148 pC/N, respectively.

• Transactions on Electrical and Electronic Materials
• /
• 제11권3호
• /
• pp.126-129
• /
• 2010

(1-X) $(Na_{0.5}K_{0.5})NbO_3-X$ $K_4CuNb_8O_{23}$ (NKN-X KCN) ceramics were produced using the conventional solid state sintering method, and their sinterability and electric properties were investigated. The density, dielectric constant (${\varepsilon}_r$), piezoelectric constant $d_{33}$, electromechanical coupling factor $k_p$ and mechanical quality factor $Q_m$ value of the NKN ceramics depended upon the KCN content and the sintering temperature. In particular, the KCN addition to the NKN greatly improved the mechanical quality factor $Q_m$ value. The ceramic with X = 2.0 mol% sintered at $1,150^{\circ}C$ possesses the optimum properties (${\varepsilon}_r=241$, $d_{33}=78$, $k_p=0.34$ and $Q_m=1,121$). These results indicate that the ceramic is a promising candidate material for applications in lead free piezoelectric transformer and filter materials.