• 한국토양비료학회지
• /
• 제48권6호
• /
• pp.712-723
• /
• 2015

This study was conducted to develop the SWCC estimation equation using scaling technique, and to investigate relative sensitivity of the SWCC according to the soil water tension, for the four kinds of soil texture such as Sand [S], Sandy Loam [SL], Loam [L] and Clay Loam [CL]. The SWCC estimation equation of scale factor [${\Theta}sc$] (Eq. 1) was developed based on the log function (Eq. 2) and exponential function (Eq. 3). ${\Theta}sc=[({\Theta}-{\Theta}r)/({\Theta}s-{\Theta}r)]$ (Eq. 1) ${\Theta}sc=-0.196ln(H)+0.4888$ (Eq. 2) ${\Theta}sc=0.3804(H)^{(-0.448)}$ (Eq. 3) where, ${\Theta}$: water content (g/g %), ${\Theta}s$: water content at 0.1bar, ${\Theta}r$: water content at 15bar, H: soil water tension (matric potential) (bar) Relative sensitivity of soil water content was decreased as increase soil water tension, those according to soil water tension were 0.952~0.620 compared to 0.1bar case. Relative sensitivity of scale factor was also decreased as increase soil water tension, those according to soil water tension were 0.890~0.577 compared to 0.2bar case.

• 마이크로전자및패키징학회지
• /
• 제7권2호
• /
• pp.37-42
• /
• 2000

저유전상수 폴리머와 $SiO_2$위에 형성된 Al/Ti박막의 우선방위에 대해 비교하였다. DC 마그네트론 스퍼터를 이용하여 50 nm 두께의 Ti과 500 nm의 Al-1%Si-0.5%Cu(wt%) 합금 박막을 저유전상수 폴리머와 $SiO_2$기판위에 증착하였다. Al의 우선방위는 XRD $\theta$-2$\theta$와 rocking curve로 측정하였고, Al/Ti박막의 미세조직은 투과전자현미경 (TEM)으로 관찰하였다. 저 유전상수 폴리머 위에 증착된 Al/Ti박막은 $SiO_2$위에 증착된 것보다 낮은 우선방위를 가졌다. 단면 TEM으로 Ti을 관찰한 결과, $SiO_2$위의 Ti의 결정립은 기판에 수직하게 성장하였으나 저유전상수 폴리머 위의 Ti 결정립은 등축정으로 성장하였으며, 저유전상수 폴리머위의 Al/Ti박막이 낮은 우선방위를 갖는 이유는 Ti 미세조직 때문이었다.

• Kyungpook Mathematical Journal
• /
• 제48권3호
• /
• pp.337-357
• /
• 2008

We enumerate all algebraic tangles of seven crossings or less up to equivalence. These tangles are mutually distinguished by the corresponding links and their double. The result will be used for enumerating $\theta$-curves and handcuff graphs in a forthcoming paper.

• 대한수학회논문집
• /
• 제35권4호
• /
• pp.1269-1281
• /
• 2020

In this article, we show that a pseudo-Hermitian magnetic curve in a normal almost contact metric 3-manifold equipped with the canonical affine connection ${\hat{\nabla}}^t$ is a slant helix with pseudo-Hermitian curvature ${\hat{\kappa}}={\mid}q{\mid}\;sin\;{\theta}$ and pseudo-Hermitian torsion ${\hat{\tau}}=q\;cos\;{\theta}$. Moreover, we prove that every pseudo-Hermitian magnetic curve in normal almost contact metric 3-manifolds except quasi-Sasakian 3-manifolds is a slant helix as a Riemannian geometric sense. On the other hand we will show that a pseudo-Hermitian magnetic curve γ in a quasi-Sasakian 3-manifold M is a slant curve with curvature κ = |(t - α) cos θ + q| sin θ and torsion τ = α + {(t - α) cos θ + q} cos θ. These curves are not helices, in general. Note that if the ambient space M is an α-Sasakian 3-manifold, then γ is a slant helix.

• 한국해양학회지
• /
• 제5권1호
• /
• pp.6-13
• /
• 1970

Ten days and monthly mean temperatures were analysed daily data observed during July, 1916 to March, 1970 statistically. Periodic characters were calculated by Δn, new method of approximate solution of Schuster Method. According to ten days mean temperatures, annual variation function is F($\theta_d$)=16.29-5.27 cos $\theta_d$+0.75 cos2 $\theta_d$-3.14 sin $\theta_d$+1.16 sin2 $\theta_d$-0.63 sin $\3{theta}_d$, where $\theta_d$=$-\frac{\pi}{18}$(d-3), d is the order of ten days period, 1 to 36. Annual mean water temperature is 16.3$^{\circ}C$, minimum in the last ten days of February 10.9$^{\circ}C$, maximum in the last ten days of August 24.5$^{\circ}C$. Periodic character of secular variation shows 11 year and its curve is F($\theta_y$)=16.29+0.53 cos $\theta_y$ -0.16cos $2{\theta}_y$+0.10 cos$3{\theta}_y$-0.10 sin $\theta_y$, where $\theta_y$=2$-\frac{2\pi}{11}$(y-1920), y is calendar year. And the relation between air temperature x and water temprature y is following. y=9.67 1.035$\^x$

• 대한치과보철학회지
• /
• 제36권2호
• /
• pp.323-335
• /
• 1998

Clinically, the curve of Spee is widely applied as a determined level of the occlusal curvature when the oral rehabilitation and the reconstruction of the prosthesis is needed at the malalignment dentition due to the missing, extrusion, and the inclination of the teeth. The purpose of this study was to analyze the curve of Spee of the occlusal curvature which influences to the occlusal form and the location three dimensionally, and then was to measure the radius and the degree of curvature of the curve of Spee and also was to investigate the influence to the cuspal inclination according to the change of the inclination of the curve of Spee which was analyzed by AutoCAD R.13 program at the gnathological cast and the cephalometric radiograph. The following results were obtained : 1. The radius of the curve of Spee was the mean of $11.74{\pm}3.64cm$ in the model, $12.75{\pm}4.63cm$ in the radiograph and there was no significant difference statistically between the model and the radiograph(P>0.001). 2. The radius and the degree of curvature of the curve of Spee showed negative correlation(r=-0.80), while the radius and the degree of curvature of the curve of Spee in relation to the length of the curve of Spee did not show correlation. 3. The case of the curve of Spee inclined to the posterior, that is. $Post.M{\theta}$ group showed the mean of $4.73{\pm}3.64$, positive correlation to the P2m, M1mm, M1dm, M2dm, and especially the greatest correlation coefficient to the mesial inclination angle of the mesio-buccal cusp tip of the first molar(r=0.70). 4. The case of the curve of Spee inclined to the anterior, that is, $Ant.M{\theta}$ group showed the mean of $3.28{\pm}3.59$, positive correlation to the P2m, M1mm, and also the greatest correlation coefficient to the mesial inclination angle of the mesio-buccal cusp tip of the first molar(r=0.78

• 대한수학회지
• /
• 제38권3호
• /
• pp.595-611
• /
• 2001

Let Q(n,1) be the set of even unimodular positive definite integral quadratic forms in n-variables. Then n is divisible by 8. For A[X] in Q(n,1), the theta series $\theta$(sub)A(z) = ∑(sub)X∈Z(sup)n e(sup)$\pi$izA[X] (Z∈h (※Equations, See Full-text) the complex upper half plane) is a modular form of weight n/2 for the congruence group Γ$_1$(8) = {$\delta$∈SL$_2$(Z)│$\delta$≡()mod 8} (※Equation, See Full-text). If n$\geq$24 and A[X], B{X} are tow quadratic forms in Q(n,1), the quotient $\theta$(sub)A(z)/$\theta$(sub)B(z) is a modular function for Γ$_1$(8). Since we identify the field of modular functions for Γ$_1$(8) with the function field K(X$_1$(8)) of the modular curve X$_1$(8) = Γ$_1$(8)＼h(sup)* (h(sup)* the extended plane of h) with genus 0, we can express it as a rational function of j(sub) 1,8 over C which is a field generator of K(X$_1$(8)) and defined by j(sub)1,8(z) = $\theta$$_3$(2z)/$\theta$$_3$(4z). Here, $\theta$$_3$ is the classical Jacobi theta series.

• 호남수학학술지
• /
• 제31권1호
• /
• pp.1-9
• /
• 2009

In this paper we establish strict lower bounds on number of sticks necessary to construct stick presentations of nontrivial or almost trivial ${\mu}$-curves.

• 한국항공우주학회지
• /
• 제39권4호
• /
• pp.321-331
• /
• 2011

본 연구는 theta 투영법을 이용하여 터보제트 터빈 블레이드 크리프 특성을 파악하는데 목적이 있다. Theta 투영법은 우수한 정확성을 지니고 있어 폭넓게 사용되고 있다. 크리프 특성을 파악하기 위해 고온 크리프 시험을 수행하였으며, 시험 조건은 터보제트 엔진 운용조건과 소재의 비선형 특성을 고려하여 선정하였으며, four theta 모델의 적합성을 평가하기 위해 크리프 시험 결과와 비교하였다. 크리프 시험결과를 활용하여 크리프 곡선은 four theta model을 이용하여 생성하였다. 반복적인 계산을 통하여 비선형 최소자승법을 이용하여 시험 결과에 대해 최적의 theta 값을 도출하였다. Theta 투영법을 이용하여 크리프 곡선을 생성한 결과 $R^2$값이 0.95이상의 우수한 정확성을 지니는 것을 확인하였다. 또한 four theta 모델의 검정을 위해 수행한 시험 결과와 비교하여 예측된 theta 값이 90.0%의 정확도를 가지어, theta 투영법은 크리프 거동을 예측하여 설계목적에 이용하기 위해 유용하게 사용될 수 있다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2004년도 춘계학술대회
• /
• pp.321-323
• /
• 2004

자연의 세계에서 나뭇잎, 돌기물, 구름, 해안선, 곤충의 모습 등에 내재하고 있는 아름다움은 흔히 균형성, 대칭성, 다양성 등으로부터 비롯된다. 자연 현상은 복소수를 활용하여 극좌표 표현으로 묘사되는 경우가 많다. 본 논문에서는 1989년 Temple H. Fay가 Amer. Math. Monthly 96(5)호에서 발표한 나비곡선 $r=e^{cos{\theta}}-2cos4{\theta}+sin^5(\frac{\theta}{12})$의 기하학적 성질을 분석하고, 수학전문 소프트웨어인 매스매티카를 활용하여 나비곡선의 작도하고자 한다.