• Journal of the Korean Geophysical Society
• /
• v.2 no.1
• /
• pp.27-38
• /
• 1999

The errors between track segments or at the cross-over points of shipborne gravity were successfully reduced by applying a cross-over error adjustment technique using satellite gravity. The integration of shipborne and satellite altimeter-implied free-air gravity anomalies after the cross-over error adjustment resulted in a high resolution gravity map which contains both short and long wavelength components. The successful adjustment of the cross-over errors in the shipborne gravity using the satellite gravity suggests that the shipborne gravity can be combined with the satellite anomalies characterized by a stable and long wavelength component. The resulting free-air anomaly map is evenly harmonized with both short and long wavelength anomalies. Thus the corrected anomaly map can be better used for the geological interpretation. Free-air anomalies with more than 140 mGal in total variations generally correspond to the seafloor topographic changes in their regional patterns. A series of gravity highs are aligned from the Korea Plateau to the Oki Island, which are interpreted to be caused by seamounts or volcanic topographies. The gravity minima along the western and southern shelf edge are associated not only with the local basement morphology and thick sediment fill at the continental margin, but also possibly with the crustal edge effect known for passive continental margins. Series of NE-trending linear anomalies are possibly caused by a swarm of volcanic intrusions followed the initial opening of the Ulleung Basin. The linear high anomalies in the Ulleung Plateau are terminated by the straightly NNW-trending anomalies with a sharp gradient in its western boundary which indicates a fault-line scarp. The opposite side adjoined with the fault-line scarp shows no correlation with the fault-line scarp in geometry indicating that the block might be horizontally slided from the north. A gravity high in contrast to the deepening in seafloor toward the northeastern central Ulleung Basin is probably responsible for the thin crust and shallow seated mantle. The gravity minima along the western and southern shelf edge are associated not only with the local basement morphology and thick sediment fill at the continental margin, but also possibly with the crustal edge effect known for passive continental margins. Series of NE-trending linear anomalies are possibly caused by a swarm of volcanic intrusions followed the initial opening of the Ulleung Basin. The linear high anomalies in the Ulleung Plateau are terminated by the straightly NNW-trending anomalies with a sharp gradient in its western boundary which indicates a fault-line scarp. The opposite side adjoined with the fault-line scarp shows no correlation with the fault-line scarp in geometry indicating that the block might be horizontally slided from the north. A gravity high in contrast to the deepening in seafloor toward the northeastern central Ulleung Basin is probably suggestive of a thin crust and shallow seated mantle.

• Food Science and Preservation
• /
• v.22 no.5
• /
• pp.699-707
• /
• 2015

To improve the utilization of the domestic plant Salvia miltiorrhiza Bunge (Danshen), this study investigated changes in the physicochemical qualities of Danshen extracts obtained from low-temperature extraction using the enzymes amylase, cellulase, pectinase, and protease. Changes in the yield, pH, sugar content, and chromaticity were investigated. The changes were found to be highest in the amylase-treated extract with the following values: yield, 58.3%; pH, 6.04; sugar content, $5.97^{\circ}Brix$. With regard to antioxidant properties, Danshen extracts treated with amylase showed the highest DPPH and ABTS scavenging activities of 84.25% and 74.11% at 55 ppm. The total phenolic compound content was highest in the group subjected to enzyme treatment at $60^{\circ}C$. The salvianolic acid B level of the Danshen extract was the highest in the amylase-treated group, with a value of 3,002.6 mg/100 g. Cryptotanshinone level was the highest in the amylase- and protease-treated group with a value of 3.8 mg/100 g. Tanshinone I was the highest in the protease-treated group, with a value of 14.2 mg/100 g. The results showed that the indicator components of Danshen were detected as stable in the extracts after using amylase for low-temperature extraction; therefore, it would be possible to use Danshen industrially as a functional ingredient through mass production. Furthermore, the enzyme-treatment extraction could be utilized for a variety of natural products.

• Food Science and Preservation
• /
• v.16 no.5
• /
• pp.605-611
• /
• 2009

Korean Baechu cabbage(known as Chinese cabbage) brined in 0%, 5% and 10% (all w/v) salt solutions were packed using high-density polyethylene film (HDPE-film), low-density polyethylene film (LDPE-film), or Mirafresh film (MF-film, US patent No. 5972815), and stored at 4C for 4 weeks. Changes in pH and salinity, and microorganism counts (lactic acid bacteria and total bacteria), were investigated. There was no significant difference in the pH change in cabbage stored using various films when the vegetables were not salted. However, the pH was most stable in Baechu cabbage prepared using 10% salt solution. Cabbage treated with 0%, 5%, and 10% salt showed salinity values of 0.83%, 1.17% and 1.62%(all w/w), respectively, after 4 weeks of storage by LDPE-film. When cabbage was treated with the highest concentration of salt solution, the count of lactic acid bacteria increased but that of total bacteria decreased. The pH from pH 6.10 to pH 4.32, pH 5.68, and pH 5.92 in brined cabbage packed in HDPE-film, LDPE-film, and MF-film, respectively, after 4 weeks. When MF-film was used, the pH showed the greatest stability of all films tested, regardless of the concentration of salt solution employed in brining. The counts of lactic acid bacteria and total bacteria increased by all tested films during storage. Cabbage packed by MF-film showed the lowest increase in bacterial counts. In conclusion, MF-film was found to be the most effective packaging material for Baechu cabbage and brining in 10% salt solution was optimal to enhance the shelf life of the vegetable. LDPE-film was more effective than was HDPE-film for storage of brined cabbage.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.3
• /
• pp.275-284
• /
• 2012

This study was carried out to determine the harvest management during autumn on the forage production, quality and regrowth of following year of Phragmites communis as native grass. Field experiments were conducted in Ansan and in Cheonan from 2010 to 2011. Forages were cut at 3 cm, 15 cm and 25 cm in height as compared to control (no harvest) in Ansan plots, and forages grown in Cheonan plots were cut at 10 cm and 20 cm in height with control (no harvest). The forages were harvested one time on Oct 7, 2011 in Ansan, and were harvested twice on July 7 and on October 7 in Cheonan. In Ansan, dry matter (DM) yield of control plot the following year were higher than those from harvested plots. In vitro digestible DM (IVDDM) yields, however, were the same: 1,236 kg/ha from control, 1,234 kg from 15 cm cut and 1,241 kg from 25 cm cut plots, except that lower IVDDM yield from 3 cm cut plot than these were observed. Forage quality of control plot was poorer than those of harvested ones. In vitro DM digestibility (IVDMD) and relative feed value (RFV) of control were 39.98% and 65.3, respectively as compared to harvested plots (42.36~46.40% IVDMD and 67.8~72.5 RFV). Yield and quality from Cheonan plots were similar to those from Ansan plots. Annual yield in DM and in CP from control plot were a little higher than those from harvested plots. However, there were no difference found in IVDDM yield between 20 cm cut (5,354 kg/ha) and control (5,178 kg). But IVDDM of 10 cm cut forages was less (4,531 kg). Forage quality scores were better from 20 cm cut, and 10 cm cut plot than control, in order (p<0.05). The quality grades were the 5th and 6th for forages from harvested plots and control plot, respectively. Regrown Phragmites communis from all Cheonan plots ranked the 4th in forage quality. More than 70% of annual yield was observed from the first grown forages. One time harvest per year was desirable for following regrowth and long time stable production of Phragmites communis. We recommended that Phragmites communis be harvested once for more forage yield with higher quality, and that optimum cutting height is 15~20 cm.

• Journal of Life Science
• /
• v.19 no.7
• /
• pp.994-1002
• /
• 2009

A bacteriocin-producing bacterium identified as Bacillus licheniformis was isolated from soybean sauce. Antibacterial activity was confirmed by paper disc diffusion method, using Micrococcus luteus as a test organism. The bacteriocin also showed antibacterial activities against Bacillus sphaericus, Lactobacillus bulgaricus, Lactobacillus planiarum, Paenibacillus polymyxa, and Pediococcus dextrinicus. Optimal culture conditions for the production of bacteriocin was attained by growing the cells in an MRS medium at a pH of 6.5~ 7.0 and a temperature of 37$^\circ$C for 36$\sim$48 hr. Solvents such as chloroform, ethanol, acetone, and acetonitrile had little effect on bacteriocin activity. However, about 50% of bacteriocin activity diminished with treatment of methanol and isopropanol at the final concentration of 50% at 25$^\circ$C for 1 hr. It was stable against a pH variation range from 3.0 and 7.0, but the activity reduced to 50% at a pH range from 9.0 to 11.0. It's activity was not affected by heat treatment at 100$^\circ$C for 30 min and 50% of activity was retained after heat treatment at 100$^\circ$C for 60 min, showing high thermostability. The bacteriocin was purified to a homogeneity through ammonium sulfate precipitation, SP-Sepharose ion-exchange chromatography, and reverse-phase high-performance liquid chromatography (HPLC). The entire purification protocol led to a 75-fold increase in specific activity and a 13.5% yield of bacteriocin activity. The molecular weight of purified bacteriocin was estimated to be about 2.5 kDa by tricine-SDS-PAGE.

• Journal of Life Science
• /
• v.20 no.7
• /
• pp.1107-1112
• /
• 2010

In this study, the stable maintenance of bioactivity in alkaline ionized water (AIW) and antibacterial effects of AIW were evaluated to confirm benefits of AIW. As controls, purified water (PW) and tap drinking water (DW) were used. The pH and ORP (oxidation-reduction potential) of AIW, PW and DW used were 9.5 and 120 mV, 7.2 and 144 mV, and 7.3 and 564 mV, respectively. High level of minerals was observed in DW (DW>AIW>PW of mineral contents). Concentrations of $Ca^{++}$ and $Na^+$ in DW were 14.5, and 8.4 mg/l, respectively, while no $Ca^{++}$, $Mg^{++}$, $K^+$, and $Na^+$ were detected in PW. Evaluation of antioxidant activities for AIW, PW and DW showed that the waters did not act as antioxidants. However, the DPPH (1,1-diphenyl-2-picryl hydrazyl) or superoxide radical scavenging activities or reducing power of vitamin C were stably maintained in AIW and PW, though not in DW, against heat treatment ($60^{\circ}C$) or vigorous shaking (120 rpm) at $37^{\circ}C$. Similarly, after aspirin treatment at $60^{\circ}C$ for 1 hr, the antithrombosis activity in PW and AIW was 62.6% and 55.3%, while that of DW was 52.1%. Furthermore, cell growth analysis and viable cell count of Escherichia coli H7:O157 in PW, AIW and DW showed that AIW and DW, not DW, have antibacterial activities. Our results suggest that the state of water, for example pH, ORP and mineral contents of water, should be considered in medicine or food industries, and that AIW has high potential for utilization in various fields.

• Korean Journal of Medicinal Crop Science
• /
• v.13 no.6
• /
• pp.226-233
• /
• 2005

This study was carried out to evaluate the fruit and growth characteristics of selecting Vitis amurensis through functional material analysis and sensory evaluation in V. amurensis collected in Gangwondo. For evaluation of growth characteristics in V. amurensis, experiments were carried out by compared with the two grape cultivars 'Campbell Early' and 'Kyoho'. The full bloom and verasion time in V. amurensis was investigated faster than those of examined cultivar grapes, while harvest time was investigated latter than those of examined cultivar grapes, but agronomic characteristics was not thought significantly difference between cultivar grapes and V. amurensis. For evaluation of shoot growth phase, the growth curve was very similar to cultivar grapes. The berry size in V. amurensis showed that increases rapidly between 3 and 4 days after full bloom time, and approximately doubles between the second growth period and harvest time, and the berry development phase investigated that consist of two sigmoid growth periods separated by a lag phase. The berry weight and soluble solids in V. amurensis increased with the tree age, but acidity and total sugar contents decreased, and showed a special quality and stable growth according to vine age. To investigation of functional materials, the anthocyanin content in V. amurensis ranged from 16.6 to 50.2 mg/100 g, and the resveratrol content ranged from 0.143 to $0.236{\mu}g/100\;g$ which was higher than those of cultivar grapes. These result indicated that V. amurensis tended to have the useful material larger than cultivar grapes. Therefore, other edibility factors of V. amurensis collected in Gangwondo may contribute to breeding studies in Vitis. spp.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.2
• /
• pp.125-139
• /
• 2010

Behavior of heavy metals and arsenic in the tailings of Songcheon Au-Ag mine was characterized via both mineralogical and geochemical methods. Mineral composition of the tailings was investigated by X-ray diffractometry, energy-dispersive spectroscopy, and electron probe micro-analyzer (EPMA) and total concentrations of heavy metals and arsenic and their chemical forms were analyzed by total digestion of aqua regia and sequential extraction method, respectively. The results of mineralogical study indicate that the tailings included mineral particles of resinous shape mainly consisting of galena, sphalerite, pyrite, quartz, and scorodite, and specifically socordite was identified in the form of matrix. EPMA quantitative analyses were performed to evaluate the weatherability of each mineral, and the results suggest that it decreased in the sequence of arsenopyrite > galena > sphalerite > pyrite. The weathering pattern of galena was observed to show distinctive zonal structure consisting of secondary minerals such as anglesite and beudantite. In addition, almost all of arsenopyrite has been altered to scorodite existing asmatrix and galena, sphalerite, and pyrite which have lower weatherability than arsenopyrite were identified within the matrix of scorodite. During the process of alteration of arsenopyrite into scorodite, it is likely that a portion of arsenic was lixiviated and caused a great deal of detrimental effects to surrounding environment. The results of EPMA quantitative analyses verify that the stability of scorodite was relatively high and this stable scorodite has restrained the weathering of other primary minerals within tailings as a result of its coating of mineral surfaces. For this reason, Songcheon tailings show the characteristics of the first weathering stage, although they have been exposed to the surface environment for a long time. Based on the overall results of mineralogical and geochemical studies undertaken in this research, if the tailings are kept to be exposed to the surface environment and the weathering process is continuous, not only hazardous heavy metals, such as lead and arsenic seem to be significantly leached out because their larger portions are being partitioned in weakly-bound (highly-mobile) fractions, but the potential of arsenic leaching is likely to be high as the stability of scorodite is gradually decreased. Consequently, it is speculated that the environmental hazard of Songcheon mine is significantly high.

• Korean Chemical Engineering Research
• /
• v.48 no.2
• /
• pp.275-282
• /
• 2010

A characteristic study of aqueous chlorine dioxide generation from sodium chlorite($NaClO_2$) by an undivided electrochemical cell with different anode materials were performed. $IrO_2$-coated Ti, $RuO_2$-coated Ti and DSA were used as anode materials and Pt-coated Ti electrode was used as cathode. Various electrochemical cell operating parameters such as cell residence time($t_R$), initial feed solution pH, sodium chlorite and sodium chloride(NaCl) concentration and applied current for the generation of chlorine dioxide in an un-divided cell were investigated and optimized. Estimated optimal cell residence times in $IrO_2$-coated Ti, $RuO_2$-coated Ti and DSA anode material systems were around 2.27, 1.52 and 1.52 sec, respectively. Observed optimum initial feed solution pH was around 2.3 in all anode material systems. Optimum sodium chlorite concentrations in $IrO_2$-coated Ti, $RuO_2$-coated Ti and DSA anode systems were around 0.43, 0.43 and 0.32 g/L, respectively. Optimum electrolyte concentration and applied current were around 5.85 g/L and 0.6 A in all anode systems. Current efficiencies of $IrO_2$-coated Ti, $RuO_2$-coated Ti and DSA anode systems under optimum conditions were 79.80, 114.70 and 70.99%, respectively. Obtained energy consumptions for the optimum generation of chlorine dioxide were 1.38, 1.03 and $1.61W{\cdot}hr/g-ClO_2$, respectively.

• Journal of the Korean Electrochemical Society
• /
• v.9 no.3
• /
• pp.124-131
• /
• 2006

For commercialization of molten carbonate fuel cell (MCFC), it has some problems to be overcome such as decrease of porosity and thickness of the anode under the operating condition (at $650^{\circ}C$ and working pressure of more than 2 $kg_f/cm^2$). Recently, Ni-Al alloy anode has been proposed to replace the conventional Ni-Cr anode as an alternative material to resist a creep and inhibit the sintering. The objective of this research is to sinter the green sheet of Ni-Al alloy anode during single cell pre-treatment process, which has several advantages like cost down and simplification of manufacturing process. However, the Ni-Al alloy anode prepared with a conventional pre-treatment process showed the phase separation of Ni-Al alloy and formation of micropore(${\leqq}0.4{\mu}m$), resulting in low creep resistance and high electrolyte re-distribution. In order to prevent the Ni-Al alloy anode from phase-separating, nitrogen gas was used in the process of pre-treatment. Introducing the nitrogen, the phase separation from Ni-Al alloy into nickel and alumina was minimized and increased creep resistance. However, there was some micropore formation on the surface of Ni-Al alloy anode during the cell operation due to creation of lithium aluminate. Addition of more amount of electrolyte into a cell, especially at cathode, made the cell performance stable for 2,000 hrs. Consequently, it was possible to make the Ni-Al alloy anode with good creep resistance by the modified in-situ sintering technique.