• Tunnel and Underground Space
• /
• v.20 no.4
• /
• pp.267-276
• /
• 2010

In modern rock engineering practice, fully grouted rock bolting is actively employed as a major supporting system, so that understanding the behavior of fully grouted rock bolts is essential for the precise design of rock bolting. Despite its importance, the supporting mechanism of rock bolts has not been fully understood yet. Since most of existing analytical models for rock bolts were developed by drastically simplifying their boundary conditions, they are not suitable for the bolts of in-situ condition. In this study, 3-D elastic FE analysis of fully grouted rock bolts has been conducted to provide insight into the supporting mechanism of the bolt. The distribution of shear and axial stresses along the bolt are investigated with the consideration of different boundary conditions including three different displacement boundary conditions at the bolt head, the presence of intersecting rock joints, and the variation of elastic modulus of adjacent rock. The numerical result reveals that installation of the faceplate at the bolt head plays an important role in mobilizing the supporting action and enhancing the supporting capabilities of the fully grouted rock bolts.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.18 no.1
• /
• pp.4011-4020
• /
• 1976

본논문은 북해도대학심사학위논문으로 총면수 143면인 영문으로 되어 있고 도 48, 표 7, 문묵 66부도, 부표 20면이있음. Plow는 옛부터 발달한 농구이기 때문에 많은 연구가 행하여졌지만 복잡한 물리성을 가준 토양을 대상으로 하는 기계이기 때문에 미해결의 문제도 적지않다. 이견인저항에 대하여 토양의 종류 및 조건을 변경하면서 실제의 포장에서 조직적으로 행한 실험은 극히 적고, 하물며 우리나라의 쟁기에 관한 연구는 거의없다. 본논문은 쟁기의 특징을 구명하고, 그의 개량, 발달에 기여하기 위한 기기자료를 획득코저 실시한 것이다. 1. 쟁기와 플라우의 구조 및 그의 차이 특징을 명백히하고 이체에 걸리는 각종의 저항의 내용 또는 그 비율등에 대하여 과거의 연구성과를 소개하였다. 2. 발달사 ; 플라우는 B.C. 2000년경에 녹각, 목지의 인력용의 경운용구에서 발달하고, 동양이도 기원은 대체로 같고 발달과정이 다를 뿐이다. 쟁기는 양자강연안에 기원을 가진 지나이가 신라와 백제에 도입되여 차차 발달하고, 지역적인 특징을 가지게 되었다. 3. 본장은 쟁기의 견인력에 관한 이론적해석을하고, 쟁기의 진행에 의해 층상으로 전단되는 전단저항을 구하고 쟁기의 표면 및 지측판과 토양과의 마찰력, 그리고 토양의 이동의 관성력을 쟁기의 견인저항에 관련되는 주요한 "힘"으로 생각하고 진행방면, 수직방면의 힘의 성분의 평형을 고려하여 식 10. 12를 유도 하였다. 4. 본장에서는 실험계획, 방법 공시기, 공시포장등을 기록하고, 축력용의 쟁기와 플라우를 사용하여 전지 4종 답 2종의 포장에서 실험하는데 견인력계와 자동경심측정기를 사용하였다. 5. 실험결과 및 고찰; 경심과 견인저항 Dp와의 관계는 식 10. 12와 갈이 표시되고, 실제의 제치를 대입하여 이론식을 유도하였으니 직선에 가까운 관계가 있고, 실험결과는 조금 곡선에 가까워졌다. 그리고, 토양의 물리성이 견인력Dp에의 영향을 세밀히 검토하였다. 쟁기의 견인비저항에 있어서도 식 12에서 {{{{K=AT+ { B} over {T } +C}}}}로 표시할수 있기 때문에 최소치를 표시하는 경심이 존재하고 이값은 쟁기나 플라우폭의{{{{ { 1} over {2 } }}}} 즉 10m정도이고 쟁기는 비저항이 0.llkg/$\textrm{cm}^2$에서 0.39kg/$\textrm{cm}^2$이였다. 그러나 이 비저항도 토양의 물리성이 많은 영향을 미치고 있다. 6. 요약 및 결론 ; 이상의 장에서 검토 고찰한 결과만을 기재하고 플라우는 쟁기에 비해 견인저항 및 비저항이 논에서나 밭에서 대로 나타난 것이 특이하다. 이상의 내용을 지면관계로 3회에 거쳐 요약 발표합니다.

• Parasites, Hosts and Diseases
• /
• v.22 no.1
• /
• pp.85-95
• /
• 1984

This study was performed to investigate the intestinal parasites (especially cestoda) in the guts of Theragra chalcogramma in Korea. The cestode larvae collected were morphologically observed and measured, and at the same time, microscopical study was done with the section slides of the cestode larvae. They were identified on the basis of the descriptions by Schmidt and Yamaguti. The results obtained in this study are as follows: 1. The cestode larvae were identified as Khawia sinesis, Eulacistorhynchus chiloscyllius, Tentacularia coryphaenga, Pssudonybelinia odontasantha and Nybelinia Zingualis. These are new species reported in Korea. 2. The characteristics of Khawia sinesis are its scolex lacking loculi and broad, fat and fimbriate shape. Its neck is not separated from the body but a little constricted. 3. Eulacistorhynchus chiloscyzzius is characterized by fairly long and acraspedote scolex. The bulbs are long; retractor muscles are attached to bases of the bulbs. The two bothridia are oval or round in shape and lacking posterior notch. The tentacles are long and poeciloacanthus; double chainette present. 4. Tentacularia coryphaenea is characterized by its long craspedote and subcylindrical scolex. The bothridia are separated, without free borders and spinous. The tentacles are short, slender, armed with solid hooks in spirals, similar except the base of tentacle. The tentacle sheaths are not twisted. The bulbs are ellipsoidal. 5. Pseudonybelinia odontacantha is characterized by its craspedote scolex. The tentacles are inserted near anterior margin of bothridia and armed with hooks in spirals ascending left to right. The hooks are similar, throughout tentacle, with feeble curve and provided with a tooth-like protuberance on the ventral side. The bulbs are three times longer than its width. The posterior margins of bothridia have a pair of eversible ciliated pits; or fossettes. 6. Nybelinia lingualis is characterized by its short and craspedote scolex. The bothridia are separated, with free boarders. The tentacles are cylindrical, armed with solid and similar hooks in quincunxes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.543-554
• /
• 2016

This study examined the fatigue and its association with job stress among male workers engaged in small-scale manufacturing industries. The study subjects were 553 male workers under 50 members of manufacturing industries. The study survey was a structured questionnaire of the Korean Occupational Stress Scale (KOSS) and Multidimensional Fatigue Scale (MFS) during April, 2015. The data were analyzed using the SPSS ver 21.0 program. The results showed that the high risk fatigue group was significantly higher in the high risk group of job stress than in the normal group of job stress. Fatigue was positively correlated with job stress. The odds ratio of the high risk fatigue group were increased significantly in the high risk group of job stress than in the normal group of job stress. The factors of influence with explanatory powers of 27.7% on fatigue included age, marital status, educational level, subject health status, sleeping time, drinking coffee, job tenure, shift work, visiting out-patient department, sense of satisfaction in job life, and job stress. Fatigue was associated with the sociodemographic characteristics, health behavior related characteristics, job-related characteristics, and job stress.

• Journal of Oral Medicine and Pain
• /
• v.31 no.2
• /
• pp.147-154
• /
• 2006

This paper studies natural head position and orofacial pain. For this study. 27 persons with dental service were selected, we examine head & neck pain, factor affecting pain severity, stress, stressful facial symptom with questionarre and interview. We have photograph for natural head position in front of 5cm posture scale pate. Data obtained were statistically processed by the SPSS Windows program and the results of this study were as follows: 1. There were significant difference from plum line to acromion line, from plum line to tragus line, eye- tragus angle, SCM angle. 2. Between group with head and neck pain and group without head and neck pain, the study shows no significant difference on average NHP measurement and NHP amount. 3. Between group with head and neck pain and group without head and neck pain, the study shows no significant difference on SRRS. 4. In this paper we indicate more stressful symptom in group with head and neck pain than group without head and neck pain. 5. There have no difference in head and neck pain level according to hobby.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.4
• /
• pp.582-593
• /
• 1999

This paper presents the design and fabrication of the diplexer for a KOREASAT-III Ka-band satellite transponder. The transmission characteristics of the diplexer is analyzed by calculating the generalized scattering matrix using mode matching method. It is composed of 2 bandpass filters, coupled with H-plane T-junction having symmetrical inductive iris and E-plane metal insert structures. Compared with the size and weight of the Rx and Tx filter loaded with a transponders respectively, those of the diplexer can be effectively reduced. In a high power transmission, the variation of the filter characteristics is minimized by the scheme that irises are extended to the exterior of H-plane of the waveguide. This scheme needs no extra heat sinks for dissipating high power. The diplexer is designed to improve the simplification, durability and reliability by eliminating tuning screws, which have been used to compensate for the characteristics of fabricated filters. The bandpass filters of the diplexer show the insertion loss of less than 1.2 dB and the return loss in excess of 15 dB. The isolations of more than 65 dB have been achieved between Rx and Tx filter.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.1
• /
• pp.35-45
• /
• 2013

A autonomous vehicle requires improved and robust perception systems than conventional perception systems of intelligent vehicles. In particular, single sensor based perception systems have been widely studied by using cameras and laser radar sensors which are the most representative sensors for perception by providing object information such as distance information and object features. The distance information of the laser radar sensor is used for road environment perception of road structures, vehicles, and pedestrians. The image information of the camera is used for visual recognition such as lanes, crosswalks, and traffic signs. However, single sensor based perception systems suffer from false positives and true negatives which are caused by sensor limitations and road environments. Accordingly, information fusion systems are essentially required to ensure the robustness and stability of perception systems in harsh environments. This paper describes a perception system for autonomous vehicles, which performs information fusion to recognize road environments. Particularly, vision and laser radar sensors are fused together to detect lanes, crosswalks, and obstacles. The proposed perception system was validated on various roads and environmental conditions with an autonomous vehicle.

• Clinical and Experimental Pediatrics
• /
• v.45 no.8
• /
• pp.1028-1032
• /
• 2002

Subcutaneous pannicultis-like T cell lymphoma is a rare cutaneous T cell lymphoma. It presents with multiple subcutaneous nodules or plaques involving the extremities or trunk, and with constitutional symptoms that include fever, malaise, fatigue, myalgia, chills and weight loss. Histologically, the lesions of this disease are reminiscent of panniculitis and are composed of a mixture of small and large atypical lymphoid cells infiltrating between adipocytes. The optimal treatment for this disease is undefined and prognosis of this disease is poor, even when treated with multiagent chemotherapy regimens considered optimal for agressive lymphoma of other types. Poor prognosis factors include clinical features such as anemia, leukocytopenia, hepatosplenomegaly, lymphadenopathy and coagulopathy, which are suggestive of hemophagocytosis. Much of the mortality of this disease is due not to disseminated lymphoma with organ failure, but rather to complications of the cytopenias associated with the hemophagocytic syndrome. We report a case of subcutaneous panniculitis-like T cell lymphoma in a 12 year-old boy who presented with initial complaints of fever and multiple subcutaneous nodules, and briefly review the related literature.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.1
• /
• pp.99-107
• /
• 2001

Manufacture of fishing vessel is needed the effective material for light, strength, fire and corrosion of water in order to improve durability by high-speed and fishing. These fishing vessel can be divided into FRP and AI alloys fishing vessel. FRP fishing vessel is light and effective for strength but highly ignited and susceptible to heat during the manufacturing ship by-produce noxious component for human. In the case of a scrapped ship, it cause environmental pollution. On the other hand, aluminum is a material in return for FRP and has merit of high-strength and lightness. It's more heat proof and durable than FRP and superior to prevent from corrosion. Al alloys fishing vessel development is rising as an urgent matter. But, al alloy has some defect of bad weldability, welding transformation, cracks and overcost of construction. Therefore this study is to develop the new welding joint shape solving aluminum defects and mechanical behavior. First of all, strength was compared and reviewed by analysis of plate, stiffen plate, new model simplified by using plate theory. On the base of this result, plate and new model of temperature distribution, weld residual stress and strength of tensile, compressive force were compared and reviewed by finite element computer program has been developed to deal with heat conduction and thermal elasto plastic problem. Also, new model is proved application possibility and excellent mechanic by strength comparison is established to tensile testing result.

• Journal of the Korean Electrochemical Society
• /
• v.12 no.2
• /
• pp.148-154
• /
• 2009

With respect to the durability of large scale ($150cm^2$) membrane electrode assembly (MEA) of direct methanol fuel cell (DMFC), degradation phenomena at cathode is monitored and analyzed according to the position on the cathode surface. After constant current mode operation of large scale MEA for 500 hr, the MEA is divided into three parts along the cathode channel; (close to) inlet, middle, and (close to) outlet. The performance of each MEA is tested and it is revealed that the MEA from the cathode outlet of large MEA shows the worst performance. This is due to the catalyst degradation and GDL delamination caused by flooding at cathode outlet of large MEA during the 500 hr operation. Particularly on the catalyst degradation, the loss of electrochemically active surface area (ECSA) of catalyst gets worse along the cathode channel from inlet to outlet, of which the reason is believed to be loss of catalysts by dissolution and migration rather than their agglomeration. The extent of loss in the performance and catalyst degradation has strong relation to the cathode flooding and it is required to develop proper water management techniques and separator channel design to control the flooding.