• 한국철도학회논문집
• /
• 제12권5호
• /
• pp.800-805
• /
• 2009

이 연구에서는 선로구축물을 최소화 할 수 있어 도시형 자기부상철도로 적합한 LIM 방식 자기부상철도의 궤도시스템을 개발 제안하였다. 도심지에 건설될 경우 많은 사치적 비용을 초래하므로 공사기간을 단축할 수 있도록 프리캐스트 바닥판을 사용하는 상부구조 형식을 채택하였으며 바닥판 시공시 침목이 함께 설치 될 수 있는 트윈블록 침목 궤도시스템을 개발하였다. 제안한 트윈블록 침목 궤도시스템에 대해 유한요소해석과 실험을 통해 구조적 안전성을 검증하였으며 모의시공시험 및 기계연구원 시험선 시공을 통해 그 시공성을 확인하였다.

• Elastomers and Composites
• /
• 제51권4호
• /
• pp.301-307
• /
• 2016

Additive manufacturing (AM), so called 3D Printing is a new manufacturing process and is getting attraction from many industries. There are several methods of 3D printing. Among them fused deposition modeling (FDM) type is most widely used by reason of cheap maintenance, easy operation and variety of polymeric materials. Articles manufactured by 3D printing have weak deposition strength compared with conventionally manufactured products. Deposition strength of FDM type 3D printed article is highly dependent of deposition temperature. Subsequently the nozzle temperature in the FDM type 3D printing is very important and it is controlled by heat source in the 3D printer. Nozzle is connected with heat block and barrel, and heat block contains heat source. Nozzle becomes hot through heat conduction from heat source. Nozzle temperature has been predicted for various thermal boundary conditions by computer simulation and compared with experimental measurement. Nozzle temperature highly depends upon thermal conductivities of heat block and nozzle. Simulation results are good agreement with experiment.

• 대한조선학회논문집
• /
• 제38권2호
• /
• pp.79-86
• /
• 2001

본 연구에서는 수작업으로 행해지는 블록 어셈블리 순서 결정과 같은 조선 공정계획을 자동화 하기 위하여 선박의 어셈블리 모델을, 그래프 이론을 기반으로, 기하, 관계, 순서 및 계층의 4단계 모델로 구성하는 방법을 제안하였다. 기하모델은 CAD로부터 입력받는 부품들의 기하형상에 일부 속성 값(판부재, 보강재)을 부가한 것이다. 어셈블리 부품간 연결관계를 연결관계를 표현하기 위한 관계 모델을 기하 모델의 곡면간 교차계산을 통해 생성하고, 블록 어셈블리 순서와 구성관계를 나타내기 위해, 관계 모델로부터 그래프 알고리즘과 조선소의 조립 방법을 그래프 탐색 규칙으로 사용해서, 순서모델을 생성하였으며, 이를 위상정렬하여 어셈블리 계층 및 부품 리스트를 표현하는 계층모델을 생성하였다. 끝으로 위에서 제안한 4단계에 따라 Single type, double bottom type과 같은 대표적인 블록 어셈블리 모델을 대상으로 본 연구에서 제안한 방법의 타당성을 검증하였다.

• 한국정보통신학회논문지
• /
• 제14권7호
• /
• pp.1589-1596
• /
• 2010

본 논문에서는 CBP(coded block pattern) 및 colocated-MB(macro block)의 부호화 정보를 이용하여 인터모드 결정에 소요되는 계산량을 감소시키는 방법을 제안한다. 제안한 방법은 MB를 CBP 특성에 따라 best-CBP와 normal-CBP 로 나눈다. Best-CBP에서는 SKIP 모드 및 M-Type 모드일 확률이 통계적으로 96.3%이므로 인터모드 결정 과정에서 $8{\times}8$ 모드 계산을 제거한다. Normal-CBP에서는 SKIP 모드 및 M-Type 모드 결정에 colocated-MB의 부호화 정보와 MVcost(motion vector cost)를 이용하여 비트율-왜곡 치에 소요되는 계산량을 선택적으로 제거한다. 실험 결과, 제안한 방법은 전체 부호화 시간이 평균적으로 58.44% 감소되었으며, 움직임이 적은 영상에서 계산량 감소 효과가 우수함을 알 수 있었다.

• Wind and Structures
• /
• 제10권4호
• /
• pp.301-314
• /
• 2007

The lever-type active multiple tuned mass dampers (LT-AMTMD), consisting of several lever-type active tuned mass dampers (LT-ATMD), is proposed in this paper to attenuate the vibrations of long-span bridges under the excitation directly acting on the structure, rather than through the base. With resorting to the derived analytical-expressions for the dynamic magnification factors of the LT-AMTMD structure system, the performance assessment then is conducted on the LT-AMTMD with the identical stiffness and damping coefficient but unequal mass. Numerical results indicate that the LT-AMTMD with the actuator set at the mass block can provide better effectiveness in reducing the vibrations of long-span bridges compared to the LT-AMTMD with the actuator set at other locations. An appealing feature of the LT-AMTMD with the actuator set at the mass block is that the static stretching of the spring may be freely adjusted in accordance with the practical requirements through changing the location of the support within the viable range while maintaining the same performance (including the same stroke displacement). Likewise, it is shown that the LT-AMTMD with the actuator set at the mass block can further ameliorate the performance of the lever-type multiple tuned mass dampers (LT-MTMD) and has higher effectiveness than a single lever-type active tuned mass damper (LT-ATMD). Therefore, the LT-AMTMD with the actuator set at the mass block may be a better means of suppressing the vibrations of long-span bridges with the consequence of not requiring the large static stretching of the spring and possessing a desirable robustness.

• Journal of Periodontal and Implant Science
• /
• 제39권3호
• /
• pp.321-329
• /
• 2009

Purpose: The purpose of this study was to evaluate the bone regeneration of particulated hydroxyapatite(HA) and block type of hydroxyapatite graft in rabbit calvarial defects. Methods: An 8 mm calvarial circular defects were created in sixteen young adult New Zealand white male rabbits (weight $3.0{\sim}3.5kg$). Each defects were filled with Bio-Oss, particulated HA and block type HA. Sham surgery control defects were filled with blood clots. The specimens were harvested at 4 weeks and 8 weeks for histologic and histomorphometric evaluation. Results: Histomorphometric analysis demonstrated statistical differences in defect closure, new bone formation, and bone density of the four groups. Block type of HA group showed increased bone formation and bone density at 4 weeks and 8 weeks compared with Bio-Oss group or sham surgery control group(p<0.05). Conclusions: Block type of HA is an effective material for osteoconduction in rabbit calvarial defects, which may acts as a guide in use of these products in human application.

• 한국축산식품학회지
• /
• 제28권4호
• /
• pp.463-469
• /
• 2008

The objective of the present study was to compare the chemical, rheological and sensory properties of regular process cheese (control) and cholesterol-reduced block-type process cheese. The cholesterol-reduced process cheese was made by accelerated ripened cholesterol-reduced Cheddar cheese and cholesterol-reduced butter treated by crosslinked $\beta$-cyclodextrin ($\beta$-CD). The composition of the block-type process cheese was similar to the control cheese. Approximately 91.0% of cholesterol removal was observed when treated by crosslinked $\beta$-CD. The production of total free amino acids was significantly higher in cholesterol-reduced process cheese in all storage periods compared with those in the control. In sensory analysis, a significantly higher score of acidic, salty and bitterness. and lower score of elasticity were found. However, no difference was found in free fatty acids, rheological properties, and TBA test between the control and cholesterol-reduced process cheese. Therefore, the present study indicated that even though some of the significant difference was observed in sensory properties in the cholesterol-reduced block-type process cheese, most of chemical and rheological properties were comparable to the control process cheese.

• 대한건축학회논문집:계획계
• /
• 제34권2호
• /
• pp.3-11
• /
• 2018

Korea has achieved a rapid economic development and with the increase in population and national income and the expansion of social and economic activities, energy consumption has rapidly increased too. Energy consumption per head has constantly increased and currently, power consumption per head is 7.5 times bigger than in 1985. Buildings occupy 25% of total energy consumption and especially, 50% of total energy is consumed for heating and cooling. In this situation, multi-family housing, which has constantly been increased, has an energy saving rate of 1.9%, which is the lowest level and this makes the government's energy policy for sustainable energy system development useless. Besides, energy consumption leads to secondary problems, such as air, water and marine pollution and heat pollution and wastewater/drainage and the increased use of fossil fuel is a fundamental reason for ozone layer destruction and global warming. Therefore, efficient energy consumption plans are required. This study aims to analyze energy performance in each block type of high-rise and diversified multi-family housing that accounts for 60% of all the housing forms, depending on the variations in stories through BIM-based energy simulation. For this study, four representative block types were selected, based on the multi-family floor plan, which is certified for energy performance evaluation and they were applied to the floor plan of a multi-family house that is scheduled to be built. Then BIM modeling was conducted from the fifth story to the 40th story at an intervals of 5 stories and based on the finding, energy characteristics of each block type and energy performance depending on the variations in stories were analyzed. It is considered that this would serve as objective data for block type and block story decision of energy performance-based multi-family housing.

• 대한지리학회지
• /
• 제28권2호
• /
• pp.77-98
• /
• 1993

본 연구는 암설사면지형이 잘 발달하고 다양하게 분포하는 태백산맥의 남부산지를 대상으로 항공 사진판독과 도상계측 및 현지조사를 통하여 노출암설사면의 분포, 형태 및 퇴적물의 특성을 분석하고 사면의 지형적 배열과 지형발달에 관해서 연구한 논문으로써 분포적 특성에 있어서는 애추의 경우 기반암이 경암이거나 절리가 잘 발달된 지질에서, 암괴류의 경우는 화강섬록암 지질에서 높은 분포밀도를 보였다. 형태적 특성은 애추, 암괴류 모두 설상이 각각 83${\%}$, 80${\%}로 가장 많았으며 지형면의 경사도에 있어서는 애추가, 길이에 있어서는 암괴류가 각각 우세했다. 퇴적물의 특성중 암설의 평균입경은 암괴류가 보다 크게 나타났다. 한 지형면에서 암설의 장축방향성의 경우 방향성 있는 경우와 없는 경우가 있는데, 후자는 지형면상의 함몰로 그 방향성이 상실된 것으로 보인다. 끝으로 지형발달의 경우, 애추는 암석낙하(rock fall)에 의한 형성기(최종빙기)와 2차적인 영역에 의한 조정기(후빙기)로 암괴류는 암괴의 생성기(제3가 또는 제 4기의 간빙기), 암괴류의 형성기(최종빙기), 조정기(후빙기)로 구분할 수 있었다. 그리고 산지 사면의 배열유형은 6가지 유형으로 분류되었다.

• 한국의상디자인학회지
• /
• 제15권2호
• /
• pp.1-13
• /
• 2013

The study is to provide basic data on improving costume's fitting by developing physical integrated Basic Bodice Block's development for body types of adult women, which is based on setting up body-type information per truncus as fundamental of adult women's top product manufacture in being ready for Mass Customization era. Also, after review on the objectivity and accuracy of fitting information by real wear and virtual wear experiment on body types, not only 3D virtual clothing system was used as way of information provider of Clothing product, but also provided as basic data in order to use effectively on portion of clothing passion in responding to trend of Mass customization in advance. The consequence of the study is as followings. After analyzing significance differences per items on real and virtual wear evaluation, bowed type of type 1 had significance differences on waist measurement and hip circumference in back and side, which would be knowing as not integrated with costume, affecting form of human body according to virtual wear system bended on back region. Also, in side evaluation, every types except straight body type of type 3 appeared significant differences. In virtual wear evaluation, costume's expression with side body types were not similar to real wear until now except straight body types. It would be improvement things from 3D virtual wear system in advance.