권호 표지

산업경영시스템학회지 (Journal of Korean Society of Industrial and Systems Engineering) (Journal of Korean Society of Industrial and Systems Engineering)

한국산업경영시스템학회 (Society of Korea Industrial and System Engineering)

  • 계간
  • /
  • 2005-0461(pISSN)
  • /
  • 2287-7975(eISSN)

과학기술표준분류

  • 경제/경영 ＞ 경영전략/윤리

Aim & Scope

As the flagship journal of the Society of Korea Industrial and Systems Engineering, Journal of Society of Korea Industrial and Systems Engineering launched in 1978 publishes original high-quality papers on a wide range of topics of interest to industrial engineers who want to remain current with the state-of-the-art technologies. It aims to foster the engineering and business administration community by publishing papers with a strong methodological focus motivated by real problems that impact engineering practice and research. It is composed of various focus issues: design and manufacturing, operations engineering and analysis, quality and reliability engineering, intelligent information systems, scheduling and logistics and business administration. The journal published quarterly in March, June, September and December each year. The official title of the journal is 'Journal of Society of Korea Industrial and Systems Engineering' and the abbreviated title is 'J. Soc. Korea Ind. Syst. Eng.'. All submitted manuscripts are peer-reviewed by three reviewers. The text may be written in Korean or English. The abstract, acknowledgement, and references should be written in English. Some, or all, of the articles in this journal are indexed in Korea Citation Index (KCI). Manuscripts should be sent to the editorial office by the website, 'http://ksie.ne.kr' that is the URL address of the journal where full text is available. This journal was supported by the Korean Federation of Science and Technology Societies(KOFST) Grant funded by the Korean Government.

http://ksie.or.kr/run/thesis/thesis.php?bid=thesis KSCI KCI

제17권30호

  1. 최효돈;문기주 1
    PDF
    In this study the recent papers and articles related to facility layout are reviewed to identify the factors to be considered on the development of block layouts. The factors found on the articles are used in the questionnaire to find out the desired closeness ratings for them in machinery plants. The weights found at the survey are used on the development of layouts using CORELAP with examples as a demonstration purpose.
  2. 김복만;김지일 11
    PDF
    The problem of location for industries and residential quarters has undoubtedly been one of the most important factors to enhance human activities and standard of living. Nonetheless. there seem to be no such theories or approaches as to cope with this problem satisfactorily. As a matter of fact the evaluation of proposed locations so far has stuck to quantitative factors and thus the results are often rejected by the public or individuals. In deciding the location of industrial complex and/or residential quarters, the qualitative factors often play more important role than the quantitative factors. Moreover, it is quite possible for a proposed location to be disapproved for reasons other than quantifiable factors. This work presents an approach to multi-stage decision process of optimum location, particularly for residential quarters. The proposed approach consists of four stages. At the first stage, candidates for the location are searched and checked against musts. After this screening process, the candidates fulfilling the musts are evaluated both quantitatively and qualitatively at the second stage. The third stage is devoted to the integrated evaluation using diffrent weights for the two factors. At the final stage, a location is selected among the candidates evaluated at the earlier stages. This approach has been applied to and tested on a apartment-building project in Ulsan area. Difficulties arising from quantifying factors were encountered as expected. Sometimes decisions could be a matter of taste of the individuals concerned.
  3. 오영진;이근희 25
    PDF
    Mental workload has a improtant place in modern work environment such as human-computer interaction. Designing man-machine system requires knowledge and evaluation of the human cognitive process which controls information flow during our works. Many studies estimate reaction time as a index of menatal workload. This paper investigates what reflacts the workload of human information handling when the informations grow its degree. Experiment result introuce the memory time that explain the information-load more sensitive than react time. And react time shows learning effect but memory time does'nt show that effect So it can be concluded that cognitive learning or work schema needs more time to achieve dexterity than motor skill.
  4. 박선장;장영수 35
    PDF
    Improve of productivity is a key for the development of a company, which can be pursued in the apect of material factor and personal factor. And the motives of worker for their job is more influenced by the chance of incentive compensation or self-development than by participation in management and safety of their post ect. Contingency theory is one of the theories that cope with this study Therfore, this study describes incentive compensation for satisfying worker desire related company's productivity, and be presented to the aspect of contingency accounting.
  5. 오영진 43
    PDF
    Work environment has been changed as the development of new techknowledge such as computer industry. The more new techknowledges, the more changes in our work conditions. But our cognitive limits can't pace up to the change of work environment. As a result, rapid work transfer occurs frequently, which increase work stress, work error and deleterous work performance. For many changes, this paper analyse the effect of work performance when the information used in mental work is changed as a sudden impact during dexterous work conditions. When the information impact is intruded in works, performances are reduced, but the react time does not respond sensitively then cognitive process time. So it is recommended to refer the cognitive time as a index of performance when mental work is included.
  6. 고현우;황의철 51
    PDF
    This paper considers the problem of equipment replacement A equipment replacement problem is treated in a thchnological development environment. Our model assumes that the costs associated with the presently available thchnology and future technology is known, but the appearance times of future technology is uncertain. A cost model is presented, and method is suggested for finding the optimal operating time for replacement A numerical example is shown.
  7. Kim, Seung Gu 59
    PDF
    선형회귀모형에서 새로운 변수가 모형에 도입될때 몇몇 비정상적인 관찰치들은 변수들 간에 내재되어 있는 다공선성을 감추거나 혹은 오히려 더욱 크게 부풀림으로써 도입변수에 대한 해석을 매우 어렵게 만든다. 본고에서는 이러한 관찰치들을 식별할 수 있는 방법을 제안하였는데, 이와 같은 식별법은 postulated model의 회귀계수추정치에 대한 도입변수의 섭등(perturbations)을 분해함으로써 가능하였다.
  8. Jae-Joong Kim;Won-Joong Kim 67
    PDF
    Quality Control Circle activity is widely introcuced by manufacturing industries. Q.C.C. is studied not only in relation with five points of view such as corporate culture, labor union, organizational management model in Korea, the Theory W and educational revolution etc. but also in social, cultural background, and national trait's view points. The main goal of this study is to investigate sucessful role and active application in Quality Control Circle activity.
  9. 송원섭;강인선 73
    PDF
    This paper propose Adaptive Maintenance as a new type of maintenance for machine failures which are unpredictable. A purpose of adpative maintenance is to decrease inconsistency. In order to pick up some of problems the traditional maintenance policy, We discussed Time Based Maintenance(TBM) and Condition Based Maintenance(CBM) with Bath-Tub Curve. By using Machine Condition Diagnosis Technique (CDT), Monitored condition maintenance deals with the dynamic decision making for diagnosis procedures at maintenance and caution level. Adaptive Maintenance is a powerful tool for Total Production Maintenance(TPM).
  10. 양정회 81
    PDF
    Productivity relates output to input and also integrates performance aspects of quality, efficiency and effectiveness. Productivity improvement are associated with efficiency and effectiveness, productivity index involved quality and flexibility, integrated productivity measurement system, and other factors. This study focused on the productivity improvement that involved the opportunity costs such as qualify costs and flexibility effects.
  11. 홍상우 89
    PDF
    The labor-management relationship in the manufacturing industry of Korea is placed in a new situation that the political state and economic circumstances are fundamentally changed So a new policy about the labor-management relationship is needed This paper intends to find out a new policy about that based on examining the chief cause of the labor dispute in the pusan area.
  12. 이희춘;지선수 101
    PDF
    The basic of the VSI charts is that if the sample statistic computed after a sample is taken shows some indication of a process change than the sampling interval before the next sample should be short otherwise long. This paper was shown the VSS chart can be considerably more efficient than the FSS chart and the effectiveness of VSI R chart with S chart used for monitoring a process standard deviation.
  13. 윤상원;윤석환;신용백 107
    PDF
    This paper formulates a dynamic monitoring and control model with a machine state by quality variations in a single lot production system. A monitoring model is based on estimate of machine state obtained using control theory. The model studied in this paper has a great advance from a point of view the combination between quality control (Sampling, Control Chart) and automatic control theory, and can be extended in a several ways.
  14. 한현배 117
    PDF
    To improve quality of an product We have adopted new approaches such as SPC(Statistical Process Control), CIM(compure Integreated Munufactture), QDF(Quality Development Function), etc. In spite of using these approaches, an organization should fail to achive its true goal if that organization didn't developed its cooperative quality culture which is the total of collective and shared learning of quality-related values as the organization have developed its capacity to survive in its external environment and to manage its own internal affairs. In this paper, I analyzed the current quality culture of Korea Telecom and tried to suggest how Korea Telecom develop its service quality based on the quality culture.
  15. 최문일;신금석 125
    PDF
    In this paper we studied the field tracking and feedback systems of NTT in Japen and AT&T in the U.S. Then we would like to suggest an effective field quality information system for Korea Telecom, the biggest telecommunication company in Korea.
  16. 황규완;하정진 135
    PDF
    There has been increasing interest in modeling the effect of buffer stock in automatic flow lines such as transfer line, assembly line and process line. The purpose of this paper is to determine the optimal buffer stock for a two-stage process line of industry that minimize a expected cost considering line efficiency and buffer stock Analytical method for the simplified model is applied and computer simulation is conducted to real numerical example.
  17. 김광만;이재원 147
    PDF
    In this paper, we presents the prediction of failure point in facility by using the analysis of the failure symptoms. The status of a component is represented by the failure symptoms where as, the failure symptoms are expressed mathematically based on the Fuzzy Theory.
  18. 강신한;김광만;이재원 153
    PDF
    In this paper, we present the application of knowledge-based system technique for generating of PLC ladder diagram The developed prototype system receives a time chart as an input and generates a ladder logic as its output This results in the computerization and intellegent processing of PLC programming. The system can be effectively applied to sequence control where the PLC programs need to be frequently changed and generated.
  19. 박철우;강신한;김광만;이재원 161
    PDF
    The shipbuilding industry is one of the domains which need an effective computer application. Particularly the productivity of process planning of a shipbuilding for crude -oil tanker can be greatly enhanced by introducing CAPP(Computer Aied Process Planning). In this paper we describe a prototype expert system which enables block division process planning in shipbuilding. The system determines block division lines of the midship sections of oiltanker. Case-based reasoning(CBR) approach is applied for this purpose instead of rule-based one.
  20. 김성희;하정진 167
    PDF
    Generally, queueing networks, networks, chains and simulation techniques are among the most widely used evaluation tools to study computer systems, manufacturing systems etc. But, these tools have some assumptions and difficulties. So, this thesis presents a method for manufacturing system using Petri nets. Petri nets are a graphical and mathmatical modeling tool and are promising tool for describing and studying systems that are characterized as being concurrent asychronous, dynamic, distributed and parrallel. It designs Petri net model for processing time of manufacturing system And it applied to a job shop system composed of 8 machines and 4 different job types.
  21. 이민구;임치환 177
    PDF
    The importance of usability evaluation is increasing in developing the system(or product). Many usability measures and test methods have been developed in the fields of ergonomics and cognitive engineering. A systematic usability effort using established methods may be qualify as usability engineering. In this paper, general aspects of the usability engineering are introduced, and application methods of usability engineering model based on product's life cycle are presented.
  22. 임치환;이민구 185
    PDF
    The complexity and consistency are important factors that affect human information processing in use of product. In this study, complexity and consistency of product(remote controller) are measured by Task Action Grammar(TAG) model. Also, new design alternative of the user interface is presented and evaluated. The results show that the consistent system and the good correspondence between hierarchical structure of system and user's mental model lead to the reduction of errors and enhanced user's performance.
  23. 이원희 193
    PDF
    The quality culture, part of the corporate culture, is an operating philosophy of quality management of the corporation. Ultimately it assures and maintains the customer satisfaction and promotes the customer-oriented corporate management In this paper, to help meet the consumers' diversified demand and prepare the turning point of development of competitive power according to the recent rapid industrial change, proposes the efficient methods of qualify improvement activity based on creation and fixation of quality culture.
  24. 강준모 199
    PDF
    The needs for manufacturing decisions to be made in a strategic context has been recognized for many years. A manufacturing strategy is made up of many decisions and each of these needs to be considered in the strategic context. Currently in many industrial componies, starategic developments are predominantly based on corporate marketing decisions. Therefore, the attention of manufacturing managers focused primarily upon the day-to-day part of their task. This study suggests a connection scheme between corporate and manufacturing strategy. The essencial role of manufacturing manager is to make compony competitive.
  25. Bok-Man, Kim;Chung-Hwan, Oh 209
    PDF
    A consecutive k out of n failure lines with sink-source parts is a system of components in sequence such that the system fails whether some k consecutive components are all fail. Some object, be it a flow, is to be relayed from a source to a sink through a sequence of intermediate stations(components). Now care should be taken as to if the source and the sink are also considered components of the systems, i. e. , whether they serve the same function as the intermediate components (stations). Such systems are different from ordinary consecutive k- out of n failure lines by adding the on source and sink pole[6]. The main properties of the reliability by the optimal redundancy of consecutive k out of n failure lines are presented under this modification.