Patulin is a mycotoxin produced by a variety of molds, especially within genera Penicillium, Aspergillus and Byssochlamys growing on various fruits. In this study, patulin producing activities and the effects of a gamma irradiation on the control and/or sterilization of fungal strains isolated from Korean apples, Malus pumila var. dulcissima, were evaluated. Nine fungal strains; five strains of genus Penicillium and one strains of genus Glomerella, Giberella, Alternaria and Galactomyces were isolated and identified by the similarity analysis based on the nucleotide sequence of the ITS5-5.8S-ITS4 region. Among the isolated strains, four Penicillium strains and a Glomerella showed patulin producing activities. The maximal patulin-producing activity of P. griseofulvum ATCC 46037, a standard strain of patulin-producing fungi, was 1,211.5 ppm in a 5-GYEP broth medium, while those of the isolated fungi reached to 27.4~134.2 ppm. Patulin-producing levels were dependent on the carbon sources and maximal production of the patulin by P. griseofulvum, P. crustosum, I-3, I-6, I-7 and I-8 was observed in a broth media containing glycerol, fructose, glycerol, glucose, lactose and fructose, respectively. The D₁₀-values of the conidia of tested strains in an aqueous suspension were calculated in the range of 0.25~0.64 kGy. In conclusion, although the patulin producing activities of the isolated fungi were significantly lower than those of standard strains, it cannot deny the possibility of an patulin contamination of the Korean apples. Therefore, gamma ray irradiation (1.0 kGy) after harvest of apples could be applied to prevent the growth of a patulin producing molds for a safe distribution.

Polyurethane (PU) is a very popular polymer that is used in a variety of applications due to its good mechanical, thermal, and chemical properties. However, waste PU recycling has received significant attention due to environmental issues. The aim of this work was to investigate the degradation characteristics of waste PU to recycle. Degradation of waste PU was carried out using a radiation techniques. Waste PUs were exposed to a gamma ⁶⁰Co sources. To verify degradation, the irradiated PUs were characterized using FT-IR, gel permeation chromatography (GPC), and their thermal/mechanical properties are reported. When the radiation dose was 500 kGy, the molecular weight of the waste PU drastically decreased. Also, the mechanical properties of waste PU were approximately 4 times lower than those of non-irradiated PU. This study has confirmed the possibility of making fine particle of waste PU for recycling through radiation degradation techniques.

Disused Sealed Radioactive Sources (DSRSs), which are stored temporally in the centralized storage facility of Korea Radioactive Waste Agency (KORAD), will be disposed of in the low- and intermediate-level radioactive waste disposal facility located in Wolsong. Accordingly, the future plan on DSRS disposal should be established as soon as possible in connection with the construction and operation plan of disposal facility. In this study, as part of developing the systematic management plan, the radiation shielding analysis for three types of disposal container was performed for all kinds of radionuclides (excluding mixed sources) contained in DSRSs generated from domestic area using MicroShield and MCNP5 codes in consideration of the preliminary post-closure safety assessment result for disposal options, source-specific characteristics, and etc. In accordance with the analysis result, thickness of inner container for general disposal container and dimensions (i.e. diameter and height) of inner capsule for two types of special disposal container were determined as 3 mm, OD40×H120 mm (for type 1), and OD100×H240 mm (for type 2), respectively. These values were reflected in the conceptual design of DSRS disposal container, and the structural integrity of each container was confirmed through the structural analysis carried out separately from this study. Given the shielding and structural analysis results, the conceptual design derived from this study sufficiently fulfills the technical standards in force and the design performance level. And consequently, it is judged that the safe management for DSRSs to be disposed of is achieved by utilizing the disposal container with the conceptual design devised.