Acknowledgement
이 논문은 부산대학교 기본연구지원사업(2년)에 의하여 연구되었으며, 교신저자는 이에 감사 드립니다.
References
- P. M. Keshtiban, S. S. G. Ghaleh, V. Alimirzaloo, 2018, Lubrication efficiency of vegetable oil nanolubricants and solid powder lubricants, Proc. Inst. Mech. Eng., Part L: J. Mater.: Des. Appl., Vol. 233, Iss. 7. https://doi.org/10.1177/1464420718754357
- K. Tachibana, K. Kitamura, 2023, Effect of pretreatment by shotblasting prior to lubrication for cold forging, Mech. Eng. J., Vol. 10, No. 4. https://doi.org/10.1299/mej.23-00062
- C. Liu, F. Guo, P. Wong, X.Li, 2022, Laser patterninduced unidirectional lubricant flow for lubrication track replenishment, Friction, Vol. 10, pp. 1234~1244. https://doi.org/10.1007/s40544-021-0528-y
- Z. Wang, Q. Zhao, C. Wang, 2015, Reduction of Friction of Metals Using Laser-Induced Periodic Surface Nanostructures, Micromachines, Vol. 6, No. 11, pp. 1606~1616. https://doi.org/10.3390/mi6111444
- W. Y. Cjung, J. W. Min, M. G. Song, W. Y. Jeung, M. H. Rhee, 2011, Proc. 52nd Spring Conf, Kor. Soc. Tribol. Eng, Seoul, pp. 139~140.
- J. S. Lee, 2019, M.S. Thesis, Pusan National University, Pusan.
- H. H. Lee, 2012, M.S. Thesis, Sun Moon University, Asan.
- H. Sofuoglu, J. Rasty, 1999, On the measurement of friction coefficient utilizing the ring compression test, Tribol. Int., Vol. 32, Iss. 6, pp. 327~335. https://doi.org/10.1016/S0301-679X(99)00055-9
- D. Zhang, B. Liu, J. Li, M. Cui, S. Zhao, 2020, Variation of the friction conditions in cold ring compression tests of medium carbon steel., Friction, Vol. 8, pp. 311~322. https://doi.org/10.1007/s40544-018-0256-0
- A. Yahaya, S. Samion, 2022, Friction condition of aluminum alloy AA6061 lubricated with bio-lubricant in cold forging test, Ind. Lubri. and Tribol., Vol. 74, No. 4, pp. 378~384. https://doi.org/10.1108/ILT-08-2021-0326
- Y. S. Lee, S. T. Choi, Y. N. Kwon, Y. M. Rhyim, J. H. Lee, 2005, Proc. Kor. Soc. Tech. Plast. 2005 Spring Conf., Seoul, pp. 215~218.
- B. M. Kim, 2002, Evaluation of Tool Life for Forging Die Due to Lubricants and Suface Treatments, Trans. Mater. Proc., Vol. 11, No. 3, pp. 211~216. https://doi.org/10.5228/KSPP.2002.11.3.211
- E. Rajesh, M. SivaPrakash, 2013, Int. J. Sci. & Eng. Res., Vol. 4, Iss. 5, pp. 1163~1171.
- F. Martin, M.J. Martin, L. Sevilla, M.A. Sebastian, 2015, The Ring Compression Test: Analysis of Dimensions and Canonical Geometry, Procedia Eng., Vol. 132, pp. 326~333. https://doi.org/10.1016/j.proeng.2015.12.502
- J. H. Park, 2012, M.S. Thesis, Hanyang University, Seoul.
- J. H. Park, J. W. Min, W. Y. Chung, M. H. Lee, E. G. Lee, I. G. Choo, 2011, Conf. Kor. Soc. Automot. Eng. Seoul, pp. 258~262.
- M. H. Cho, S. H. Lee, S. I. Park, and I. W. Lyo, 2010, A study of Frictional Behavior of SCM415 Steel as a Function of Density of Micro Dimples, Tribol. and Lubri., Vol. 26, No. 6, pp. 311~316. https://doi.org/10.9725/kstle.2010.26.6.311
- J. H. Kim, S. G. Choi, D. Z. Segu, Y. S. Jung, S. S. Kim, 2014, Improvement of Tribological Characteristics of Multi-Scale Laser-Textured Surface in terms of Lubrication Regime, Tribol. and Lubri., Vol. 30, No. 1, pp. 59-63. https://doi.org/10.9725/kstle.2014.30.1.59