Journal of the Korean Wood Science and Technology

  • 제51권4호
  • /
  • Pages.253-269
  • /
  • 2023
  • /
  • 1017-0715(pISSN)
  • /
  • 2233-7180(eISSN)
한국목재공학회 (The Korean Society of Wood Science & Technology)
권호 표지
DOI QR코드

DOI QR Code

Mechanical Properties of the Oriented Strand Board (OSB) Distributed in the Korean Market

  • Eun-Chang KANG (Forest Products and Industry Department, National Institute of Forest Science) ;
  • Min LEE (Forest Products and Industry Department, National Institute of Forest Science) ;
  • Sang-Min LEE (Forest Products and Industry Department, National Institute of Forest Science) ;
  • Se-Hwi PARK (R&D Center, Dongwha Enterprise)
  • 투고 : 2023.02.21
  • 심사 : 2023.05.26
  • 발행 : 2023.07.25
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Oriented strand board (OSB) distributed in Korea was collected, and its mechanical properties were investigated according to the International Organization for Standardization (ISO), Japanese Industrial Standards, and Korean Design Standard. Ten types of OSBs were collected, including six types for walls and others for floors. The thickness swelling, moisture content, and density of each product satisfied the ISO standards. All products showed lower formaldehyde emission values than those of the SE0 grade. The internal bonding strengths of all products, except products B, H, and I, met the ISO standards. However, products A, B, C, F, and H did not satisfy the thickness swelling standard of the load-bearing OSB for use in dry conditions. Products D and G showed heavy duty load-bearing OSB for use in humid conditions in terms of internal bonding and bending strength after boiling. In the nail head pull-through force and lateral nail resistance tests, all products met the standards. In terms of the structural bending performance (four points), the six types of OSBs for walls satisfied the standard for bending strength and modulus of elasticity. All the products for flooring met the standard for bending strength but, except for product G, the products did not meet the standard for modulus of elasticity. Although the results of this study cannot represent the performance of all imported OSBs, considering the above results, the water resistance performance of seven types of OSB products did not meet the standard, and 10 types of products did not match the labeling grades.

키워드

과제정보

This research was supported by a Research Project (FP0600-2020-01-2020) through the National Institute of Forest Science (NIFoS), Korea.

참고문헌

  1. Ahn, K.S., Pang, S.J., Oh, J.K. 2021. Prediction of withdrawal resistance of single screw on Korean wood products. Journal of the Korean Wood Science and Technology 49(1): 93-102. https://doi.org/10.5658/WOOD.2021.49.1.93
  2. American Plywood Association [APA]. 2017. Oriented Strand Board Product Guide. APA - The Engineering Wood Association, Tacoma, WA, USA.
  3. Armin, E. 1963. Oriented Stand Board. US Patent 3164511A.
  4. Bengston, D.N., Gregersen, H.M., Haygreen, J. 1988. Seesawing across the forty-ninth parallel: The international diffusion of a wood-based technology. Journal of Forest History 32(2): 82-88. https://doi.org/10.2307/4005068
  5. Cahyono, T.D., Yanti, H., Anisah, L.N., Massijaya, M.Y., Iswanto, A.H. 2020. Linear expansion and durability of a composite boards (MDF laminated using three selected wood veneers) against drywood termites. Journal of the Korean Wood Science and Technology 48(6): 907-916. https://doi.org/10.5658/WOOD.2020.48.6.907
  6. Cha, M.S., Yoon, S.J., Kwon, J.H., Byeon, H.S., Park, H.M. 2022. Mechanical properties of cork composite boards reinforced with metal, glass fiber, and carbon fiber. Journal of the Korean Wood Science and Technology 50(6): 427-435. https://doi.org/10.5658/WOOD.2022.50.6.427
  7. Goncalves, D., Bordado, J.M., Marques, A.C., Galhano dos Santos, R. 2021. Non-formaldehyde, bio-based adhesives for use in wood-based panel manufacturing industry: A review. Polymers 13(23): 4086.
  8. Hwang, J.W., Park, H.J., Oh, S.W. 2021. Effect of resin impregnation ratio on the properties of ceramics made from Miscanthus sinensis var. purpurascens particle boards. Journal of the Korean Wood Science and Technology 49(4): 360-370. https://doi.org/10.5658/WOOD.2021.49.4.360
  9. International Organization for Standardization [ISO]. 2003a. Wood-based Panels: Determination of Density. ISO 9427. ISO, Geneva, Switzerland.
  10. International Organization for Standardization [ISO]. 2003b. Wood-based Panels: Determination of Dimensions of Panels. ISO 9426. ISO, Geneva, Switzerland.
  11. International Organization for Standardization [ISO]. 2003c. Wood-based Panels: Determination of Dimensions of Test Pieces. ISO 9424. ISO, Geneva, Switzerland.
  12. International Organization for Standardization [ISO]. 2003d. Wood-based Panels: Determination of Modulus of Elasticity in Bending and of Bending Strength. ISO 16978. ISO, Geneva, Switzerland.
  13. International Organization for Standardization [ISO]. 2003e. Wood-based Panels: Determination of Moisture Content. ISO 16979. ISO, Geneva, Switzerland.
  14. International Organization for Standardization [ISO]. 2003f. Wood-based Panels: Determination of Moisture Resistance - Boil Test. ISO 16998. ISO, Geneva, Switzerland.
  15. International Organization for Standardization [ISO]. 2003g. Wood-based Panels: Determination of Swelling in Thickness after Immersion in Water. ISO 16983. ISO, Geneva, Switzerland.
  16. International Organization for Standardization [ISO]. 2003h. Wood-based Panels: Determination of Tensile Strength Perpendicular to the Plane of the Panel. ISO 16984. ISO, Geneva, Switzerland.
  17. International Organization for Standardization [ISO]. 2005. Wood-based Panels: Determination of Wet Bending Strength after Immersion in Water at 70 Degrees C or 100 Degrees C (Boiling Temperature). ISO 20585. ISO, Geneva, Switzerland.
  18. International Organization for Standardization [ISO]. 2009. Wood-based Panels: Oriented Strand Board (OSB) - Definitions, Classification and Specifications. ISO 16894. ISO, Geneva, Switzerland.
  19. International Organization for Standardization [ISO]. 2016. Wood-based Panels: Determination of Formaldehyde Release - Part 4: Desiccator Method. ISO 12460-4. ISO, Geneva, Switzerland.
  20. Japanese Industrial Standards [JIS]. 2015. Particleboards. JIS A 5908. JIS, Tokyo, Japan.
  21. Korean Design Standard [KDS]. 2022. Wood Structural Materials and Allowable Stresses. KDS 41 50 10. Korea Construction Standards Center, Goyang, Korea.
  22. Korea Forestry Promotion Institute. 2014. Market Research of Wood Products. Korea Forest Service, Daejeon, Korea.
  23. Korea Forestry Promotion Institute. 2015. Market Research of Wood Products. Korea Forest Service, Daejeon, Korea.
  24. Korea Forestry Promotion Institute. 2016. Market Survey of Timber Products. Korea Forest Service, Daejeon, Korea.
  25. Korea Forestry Promotion Institute. 2017. Market Survey of Timber Products. Korea Forest Service, Daejeon, Korea.
  26. Korea Forestry Promotion Institute. 2018. Market Survey of Timber Products. Korea Forest Service, Daejeon, Korea.
  27. Korea Forestry Promotion Institute. 2019. Market Survey of Timber Products. Korea Forest Service, Daejeon, Korea.
  28. Korea Standards Associations [KSA]. 2017. Method of Bending Test for Structural Wood-based Panels. KS F 2159-2. KSA, Seoul, Korea.
  29. Korea Trade Statistics Promotion Institute. 2021. OSB Import Statistics. Korea Trade Statistics Promotion Institute, Seoul, Korea.
  30. Lee, H.M., Jeon, W.S., Lee, J.W. 2021. Analysis of anatomical characteristics for wood species identification of commercial plywood in Korea. Journal of the Korean Wood Science and Technology 49(6): 574-590. https://doi.org/10.5658/WOOD.2021.49.6.574
  31. Lee, I., Oh, W. 2023. Flexural modulus of larch boards laminated by adhesives with reinforcing material. Journal of the Korean Wood Science and Technology 51(1): 14-22. https://doi.org/10.5658/WOOD.2023.51.1.14
  32. Liu, Y., Xu, J., Wen, M., Park, H.J., Zhu, J., Liu, Y. 2021. Research on flame retardant plywood with different flame retardants. Journal of the Korean Wood Science and Technology 49(6): 667-678. https://doi.org/10.5658/WOOD.2021.49.6.667
  33. Mantanis, G.I., Athanassiadou, E.T., Barbu, M.C., Wijnendaele, K. 2018. Adhesive systems used in the European particleboard, MDF and OSB industries. Wood Material Science & Engineering 13(2): 104-116. https://doi.org/10.1080/17480272.2017.1396622
  34. Ministry of Land, Infrastructure and Transport. 2022. Statistics on Building Permission and Commencement Works by Year. Ministry of Land, Infrastructure and Transport, Sejong, Korea.
  35. Setyayunita, T., Widyorini, R., Marsoem, S.N., Irawati, D. 2022. Effect of different conditions of sodium chloride treatment on the characteristics of Kenaf fiber-epoxy composite board. Journal of the Korean Wood Science and Technology 50(2): 93-103. https://doi.org/10.5658/WOOD.2022.50.2.93
  36. Sumardi, I., Alamsyah, E.M., Suhaya, Y., Dungani, R., Sulastiningsih, I.M., Pramestie, S.R. 2022. Development of bamboo zephyr composite and the physical and mechanical properties. Journal of the Korean Wood Science and Technology 50(2): 134-147. https://doi.org/10.5658/WOOD.2022.50.2.134
  37. Wibowo, E.S., Lubis, M.A.R., Park, B.D. 2021. Simultaneous improvement of formaldehyde emission and adhesion of medium-density fiberboard bonded with low-molar ratio urea-formaldehyde resins modified with nanoclay. Journal of the Korean Wood Science and Technology 49(5): 453-461. https://doi.org/10.5658/WOOD.2021.49.5.453
  38. Zerbe, J.I., Cai, Z., Harpole, G.B. 2015. An Evolutionary History of Oriented Strandboard (OSB). United States Department of Agriculture, Washington, DC, USA.