DOI QR코드

DOI QR Code

The Order of Formation of Information Signals in IIoT

  • Alla Jammine (UFR de mathematiques et informatique Universite Paris Cite LIPADE) ;
  • Serkov Alexandr (Information Systems Department National Technical University, Kharkov Polytechnic Institute) ;
  • Bogdan Lazurenko (Information Systems Department National Technical University, Kharkov Polytechnic Institute) ;
  • Nait-Abdesselam Farid (UFR de mathematiques et informatique Universite Paris Cite LIPADE)
  • Received : 2023.03.05
  • Published : 2023.03.30

Abstract

In this article we propose using mathematical models of signals in wireless communication systems with autocorrelation reception of modulated ultra-wideband signals. For the transmission of information content, the method of positional-time coding is used, in which each information bit is encoded by hundreds of ultrashort pulses that arrive within a certain sequence. Comparative analysis has shown that the best noise immunity of the systems considered in this paper is the communication system, which uses the time separation of the reference and information signals.

Keywords

References

  1. Serkov A.А., Lazurenko B.А., Trubchaninova K.A., Horiushkina А.Е. Security Improvement Techniques for mobile applications of Industrial Internet of Things. IJCSNS International Journal of Computer Science and Network Security. Vol. 20, No. 5, P. 145-149. URL: http:// paper.ijcsns.org/07_book/202005/20200519.pdf
  2. I.J. Immoreev, A.A. Sudakov "Ultra-Wideband Interference Resistant System for Secure Radio Communication with High Data Rate", ICCSC'02, St. Petersburg, Russian Federation, June 2002, pp.230-233.
  3. Serkov О. A.,(2019). On the issue of solving the problem of electromagnetic compatibility of the wireless telecommunication Systems /O. А. Serkov, G. I. Churyumov//Applied Radio Electronics.- Kharkiv: KHNURE, 2017.- Vol.16 № 3,4.- P.117-121.
  4. Slepian D. Some comment on the Detection of Gaussian Ssgnals in Gaussian Noise // JRE Transactions on Information Theory, 1952. - No 2. - p. 65-68.
  5. Eric Bogatin , Signal and Power Integrity - Simplified //, Pearson, 2018 - No 3
  6. Michael B White, Computer Networking: The Complete Guide to Understanding Wireless Technology, Network Security, Computer Architecture and Communications Systems (Including Cisco, CCNA and CCENT) , CreateSpace Independent Publishing Platform , 2018, 325 p
  7. Ismail Butun, Industrial IoT: Challenges, Design Principles, Applications, and Security, Springer International Publishing; Ed 1st ed. 2020 , 264 p
  8. S. Misra, C. Roy, A. Mukherjee Introduction to Industrial Internet of Things and Industry 4.0, 1st Edition, 2021
  9. G. B. White, E.A. Fisch, U. W. Pooch "Computer System and Network Security" 1 Ed. 1996
  10. G. Veneri, A.Capasso "Hands-On Industrial Internet of Things: Create a powerful Industrial IoT infrastructure using Industry 4.0 "(2018)
  11. T. D. Chung, R. Ibrahim, S. M. Hassan "Wireless HART: Filter Design for Industrial Wireless Networked Control Systems" (2020)
  12. P. Lea "IoT and Edge Computing for Architects: Implementing edge and IoT systems from sensors to clouds with communication systems, analytics, and security", 2nd Edition, (2020)
  13. Б. Скляр. Цифровая связь. Теоретические основы ипрактическое применение. Изд. 2-еб испр.: Пер. с англ. - М.:Издательский дом <Вильямс>, 2003, с. 146.
  14. Serkov О. A., On the issue of solving the problem of electromagnetic compatibility of the wireless telecommunication Systems /O. А. Serkov, G. I. Churyumov//Applied Radio Electronics.- Kharkiv: KHNURE, 2017.- Vol.16 No 3,4.- P.117-121.(2019)
  15. DOI 10.30898/1684-1719.2018.9.5