DOI QR코드

DOI QR Code

Proposal of BIM Application Process to Improve BIM Applicability of Basic Design in Heavy Civil Projects

토목 분야 기본설계 단계 BIM 적용성 향상을 위한 BIM 적용 프로세스 제안

  • Received : 2022.08.17
  • Accepted : 2022.10.06
  • Published : 2022.10.30

Abstract

Recently, the adoption of BIM technology in domestic civil engineering projects has continually increased both in its numbers and scope. However, the BIM model was developed and used after the 2D design was developed instead of creating the BIM model from the conceptual design phase. BIM must be used throughout every phase of design and construction to use BIM for its original purpose. However, if BIM application is applied in heavy civil projects without a step-by-step guideline, it can confuse the market and face industry resistance to using BIM. Therefore, BIM is currently being used step by step in the civil engineering field by using BIM as a conversion design. However, the BIM conversion design method, currently being performed in the Preliminary design stage, has many difficulties due to low work efficiency. This paper analyzes the existing process of converting a 2D design into a 3D BIM model while addressing the issues related to its low work efficiency. To this end, a novel approach to 2D to BIM conversion for the design development stage is proposed.

최근 국내에서도 토목분야에 BIM을 활용하는 범위나 빈도가 점점 증가하고 있다. 하지만 전면설계로써 BIM을 적용하는 것이 아닌 2D 설계 이후 BIM 모델링을 수행하는 전환설계로써 BIM을 활용하고 있다. 본래 목적에 맞게 BIM을 활용하기 위해서는 전면설계로써 BIM을 활용해야 하지만, 갑작스러운 변화는 오히려 시장의 혼란과 BIM에 대한 거부감을 높일 수 있기때문에 전환설계로써 BIM 활용을 통해 단계적 BIM 정착을 진행하고 있다. 하지만, 현재 기본 설계단계에서 수행하고 있는 전환설계 방법은 낮은 업무 효율성으로 인해 실제 업무 적용에 많은 어려움이 따르고 있다. 따라서 본 연구에서는 현재 전환설계로써 BIM을 활용하는 기존의 프로세스를 분석하고 기존 프로세스에서 문제점을 보완할 수 있는 기본설계단계에서의 BIM 적용 프로세스를 제안하고자 한다.

Keywords

References

  1. 김범준.정충원.김병주.김인채.오현준.진상윤(2016a), "BIM 전환설계 프로젝트의 이슈 유형에 관한 연구", 「한국 BIM학회 정기학술대회 논문집」, 6(1): 89~92.
  2. 김범준.주형우.장문석.김병주.진상윤(2016b), "사례 연구를 통한 BIM 전환설계 프로젝트의 설계오류 이슈 분석", 「한국BIM학회 논문집」, 6(2): 47~57. https://doi.org/10.13161/KIBIM.2016.6.2.047
  3. 김청운.구본상(2014), "국가 표준도를 이용한 토목 구조물 BIM 파라메트릭 라이브러리 구축에 관한 연구", 「한국건설관리학회 논문집」, 15(4): 128~138.
  4. 윤준희.강태욱.최현상.김창윤(2014), "건설 기획 및 설계 단계 BIM/GIS 통합 플랫폼 활용을 위한 시나리오 도출 및 상세기능 정의", 「한국산학기술학회 논문지」, 15(12): 7340~7349.
  5. 최철호 (2012), "귀사는 어떤 BIM을 하십니까?", 「CAD&Graphics」, 2012.04: 42~43.
  6. 최형규.박종진.전한종(2020), "AHP 기법을 활용한 BIM 설계 업무 효율 향상을 위한 정성적 요인의 중요도 평가에 관한 연구", 「대한건축학회 추계학술발표대회논문집」, 40(2): 129~132.