Acknowledgement
본 연구는 정부(과학기술정보통신부)의 재원으로 한국연구재단의 지원을 받아 수행된 연구임 (NRF-2021R1A4A1022059).
References
- Alafaghani, A., & Qattawi, A. (2018). Investigating the effect of fused deposition modeling processing parameters using Taguchi design of experiment method. Journal of Manufacturing Processes, 36, 164-174. doi:10.1016/j.jmapro.2018.09.025
- Choi, S. C., Lee, Y. H., & Chun, T.-I. (1992). 纖維測定法 [A method of fiber measurement]. Seoul: Soohaksa.
- Dudescu, C., & Racz, L. (2017). Effects of raster orientation, infill rate and infill pattern on the mechanical properties of 3D printed materials. Acta Universitatis Cibiniensis - Technical Series, 69(1), 23-30. doi:10.1515/aucts-2017-0004
- Dwamena, M. (2020, May 5). What is the strongest infill pattern? 3D Printerly. Retrieved from https://3dprinterly.com/what-is-the-strongest-infill-pattern/
- Ehrmann, G., & Ehrmann, A. (2021a). Investigation of the shapememory properties of 3D printed PLA structures with different infills. Polymers, 13(1):164. doi:10.3390/polym13010164
- Ehrmann, G., & Ehrmann, A. (2021b). Pressure orientation-dependent recovery of 3D-printed PLA objects with varying infill degree. Polymers, 13(8):1275. doi:10.3390/polym13081275
- Fekete, I., Ronkay, F., & Lendvai, L. (2021). Highly toughened blends of poly(lactic acid) (PLA) and natural rubber (NR) for FDM-based 3D printing applications: The effect of composition and infill pattern. Polymer Testing, 99:107205. doi:10.1016/j.polymertesting.2021.107205
- Fermandez-Vicente, M., Calle, W., Ferrandiz, S., & Conejero, A. (2016). Effect of infill parameters on tensile mechanical behavior in desktop 3D printing. 3D Printing and Additive Manufacturing, 3(3), 183-192. doi:10.1089/3dp.2015.0036
- Fornells, E., Murray, E., Waheed, S., Morrin, A., Diamond, D., Paull, B., & Breadmore, M. (2020). Integrated 3D printed heaters for microfluidic applications: Ammonium analysis within environmental water. Analytica Chimica Acta, 1098, 94-101. doi:10.1016/j.aca.2019.11.025
- Fuh, Y. K., Wang, B. S., & Tsai, C.-Y. (2017). Self-powered pressure sensor with fully encapsulated 3D printed wavy substrate and highly-aligned piezoelectric fibers array. Scientific Reports, 7(1):6759. doi:10.1038/s41598-017-07360-z
- Hassan, M. R., Jeon, H. W., Kim G., & Park, K. (2021). The effects of infill patterns and infill percentages on energy consumption in fused filament fabrication using CFR-PEEK. Rapid Prototyping Journal, 27(10), 1886-1899. doi:10.1108/RPJ-11-2020-0288
- Hmeidat, N. S., Brown, B., Jia, X., Vermaak, N., & Compton, B. (2021). Effects of infill patterns on the strength and stiffness of 3D printed topologically optimized geometries. Rapid Prototyping Journal, 27(8), 1467-1479. doi:10.1108/RPJ-11-2019-0290
- Jung, I., & Lee, S. (2021). Effect of surface roughness of fabrics on tensile properties of 3D printing auxetic re-entrant pattern/textile composites. Textile Science and Engineering, 58(4), 167-176. doi:10.12772/TSE.2021.58.167
- Kabir, S., Kim, H., & Lee, S. (2020). Characterization of 3D printed auxetic sinusoidal patterns/nylon composite fabrics. Fibers and Polymers, 21(6), 1372-1381. doi:10.1007/s12221-020-9507-6
- Kabir, S., & Lee, S. (2020). Study of shape memory and tensile property of 3D printed sinusoidal sample/nylon composite focused on various thicknesses and shape memory cycles, Polymers, 12(7):1600. doi:10.3390/polym12071600
- Kim, H., Kabir, S., & Lee, S. (2021). Mechanical properties of 3D printed re-entrant pattern/neoprene composite textile by pattern tilting angle of pattern. Journal of the Korean Society of Clothing and Textiles, 45(1), 106-122. doi:10.5850/JKSCT.2021.45.1.106
- Kim, H., & Lee, S. (2020). Mechanical properties of 3D printed re-entrant pattern with various hardness types of TPU filament manufactured through FDM 3D printing. Textile Science and Engineering, 57(3), 166-176. doi:10.12772/TSE.2020.57.166
- Korean Agency for Technology and Standards. (2018, December 14). KS M ISO604 Plastics - Determination of compressive properties. Korean Standards & Certifications. Retrieved from https://www.e-ks.kr/KSCI/standardIntro/getStandardSearchView.do?menuId=919&topMenuId=502&upperMenuId=503&ksNo=KSMISO604&tmprKsNo=KSMISO604&reformNo=03
- Koske, D., & Ehrmann, A. (2021). Infill designs for 3D-printed shape-memory objects. Technologies, 9(2):29. doi:10.3390/technologies9020029
- Lee, H., Eom, R.-i., & Lee, Y. (2019). Evaluation of the mechanical properties of porous thermoplastic polyurethane obtained by 3D printing for protective gear. Advances in Materials Science and Engineering, 2019:5838361. doi:10.1155/2019/5838361
- Lee, S. (2020). 3D printing lace ; DIY project. Busan: Dong-A University Press.
- Mishra, P. K., Senthil, P., Adarsh, S., & Anoop, M. S. (2021). An investigation to study the combined effect of different infill pattern and infill density on the impact strength of 3D printed polylactic acid parts. Composites Communications, 24:100605. doi:10.1016/j.coco.2020.100605
- Nace, S. E., Tiernan, J., Holland, D., & Annaidh, A. N. (2021). A comparative analysis of the compression characteristics of a thermoplastic polyurethane 3D printed in four infill patterns for comfort applications. Rapid Prototyping Journal, 27(11), 24-36. doi:10.1108/RPJ-07-2020-0155
- Parpala, R. C., Popescu, D., & Pupaza, C. (2021). Infill parameters influence over the natural frequencies of ABS specimens obtained by extrusion-based 3D printing. Rapid Prototyping Journal, 27(6), 1273-1285. doi:10.1108/RPJ-05-2020-0110
- Rodriguez-Parada, L., de la Rosa, S., & Mayuet, P. F. (2021). Influence of 3D-printed TPU properties for the design of elastic products. Polymers, 13(15):2519. doi:10.3390/polym13152519
- Ursini, C., & Collini, L. (2021). FDM layering deposition effects on mechanical response of TPU lattice structures. Materials, 14(19):5645. doi:10.3390/ma14195645
- Xiang, D., Zhang, X., Li, Y., Harkin-Jones, E., Zheng, Y., Wang, L., ... Wang, P. (2019). Enhanced performance of 3D printed highly elastic strain sensors of carbon nanotube/thermoplastic polyurethane nanocomposites via non-covalent interactions. Composites Part B: Engineering, 176:107250. doi:10.1016/ j.compositesb.2019.107250
- Yarwindran, M., Sa'aban, N. A., Ibrahim, M., & Periyasamy, R. (2016). Thermoplastic elastomer infill pattern impact on mechanical properties 3D printed customized orthotic insole. ARPN Journal of Engineering and Applied Sciences, 11(10), 6519-6524.