한국재료학회지 (Korean Journal of Materials Research)

  • 제32권4호
  • /
  • Pages.230-236
  • /
  • 2022
  • /
  • 1225-0562(pISSN)
  • /
  • 2287-7258(eISSN)
한국재료학회 (Materials Research Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

전해 연마액 금속 이온 농도에 따른 스테인리스 스틸의 부동태 피막 형성 거동

Formation Behavior of Passive State Film on Stainless Steel for Metallic Ion Concentration in Electropolishing Solution

  • 투고 : 2022.03.24
  • 심사 : 2022.04.18
  • 발행 : 2022.04.27
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The formation behavior of a passive state film on the surface of STS304 in electrolytic solution was analyzed to determine its metallic ion composition. The properties of passive state films vary depending on the Fe and Cr ions in the electrolytic solution. It was observed that the passive state film surface became flat and glossy as the concentration of Fe and Cr ions in the electrolytic solution increased. The corrosion resistance property of the passive state film was proportional to the amount of Fe and Cr in the electrolytic solution. An initial passive state film with high Fe concentration was formed on the surface of STS304 during early electrolytic polishing. Osmotic pressure of Fe ions occurs between the passive state film and electrolytic solution due to the Fe ion concentration gradient. The Fe in the passive state film is dissolved into the electrolyte, and Cr fills up the Fe ion vacancies. As a result, a good corrosion-resistant floating film was formed. The more Fe ions in the electrolytic solution, the faster the film is formed, and as a result, a flat passive state film containing a large amount of Cr can be formed.

키워드

참고문헌

  1. J. Lee, J. Park, T. Song, K. Ryoo and Y. B. Lee, J. Korea Acad. Industr. Coop. Soc., 4, 47 (2003).
  2. J. H. Park, Y. Jun, H.-G. Yun, S.-Y. Lee and M. G. Kang, J. Electrochem. Soc., 155, F145 (2008). https://doi.org/10.1149/1.2909548
  3. S. Teraji, J. Chantana, T. Watanabe and T. Minemoto, J. Alloys Compd., 756, 111 (2018). https://doi.org/10.1016/j.jallcom.2018.05.024
  4. M. Toivola, F. Ahlskog and P. Lund, Sol. Energy Mater. Sol. Cells, 90, 2881 (2006). https://doi.org/10.1016/j.solmat.2006.05.002
  5. J. Chantana, D. Hironiwa, T. Watanabe, S. Teraji and T. Minemoto, Prog. Photovolt: Res. Appl., 24, 990 (2016). https://doi.org/10.1002/pip.2748
  6. J. B. Song, H. D. Jeong, E. S. Lee and J. W. Park, J. Korean Soc. Precis. Eng., 5, 133 (1998).
  7. R. Suzuki, Y. Yokoyama, T. Shibano, T. Sugiura and N. Katori, SAE Int. J. Mater. Manuf., 9, 474 (2016). https://doi.org/10.4271/2016-01-0354
  8. N. V. Hue and S. C. Kwon, J. Korean Inst. Surf. Eng., 36, 277 (2003).
  9. J. Richardsa, C. Cremersb, P. Fischerb and K. Schmidt, Energy Procedia, 20, 324 (2012). https://doi.org/10.1016/j.egypro.2012.03.032
  10. S. H. Kim, S. H. Lee, J. Cho, S. B. Kim, J. Choi and C. Park, J. Korean Inst. Surf. Eng., 49, 363 (2016). https://doi.org/10.5695/JKISE.2016.49.4.363
  11. H. P. Kim and D. J. Kim, Corros. Sci. Technol., 17, 183 (2018).
  12. D. Wang, Z. Zhu, N. Wang, D. Zhu and H. Wang, Electrochim. Acta, 156, 301 (2015). https://doi.org/10.1016/j.electacta.2014.12.155
  13. F. Nazneen, P. Galvin, D. W. M. Arrigan, M. Thompson, P. Benvenuto and G. Herzog, J. Solid State Electrochem., 16, 1389 (2012). https://doi.org/10.1007/s10008-011-1539-9
  14. D. Landolt, Electrochim. Acta, 32, 1 (1987). https://doi.org/10.1016/0013-4686(87)87001-9
  15. S. Magaino, M. Matlosz and D. Landolt, J. Electrochem. Soc., 140, 1365 (1993). https://doi.org/10.1149/1.2221562
  16. C. Wagner, J. Electrochem. Soc., 101, 225 (1954). https://doi.org/10.1149/1.2781235
  17. S.-H. Kim, S.-G. Choi, W.-K. Choi and E.-S. Lee, Int. J. Adv. Manuf. Technol., 85, 2313 (2016). https://doi.org/10.1007/s00170-015-8041-y