DOI QR코드

DOI QR Code

Experimental Study on Pull-out Strength of Glued-in Rods Connection according to Adhesive

접착제에 따른 Glued-in Rod 접합부 인발성능에 관한 실험 연구

  • Park, Keum-Sung (Dept. of Building Research, Korea Institute of Civil Engineering and Building Technology) ;
  • Oh, Keunyeong (Dept. of Building Research, Korea Institute of Civil Engineering and Building Technology)
  • Received : 2022.03.17
  • Accepted : 2022.04.12
  • Published : 2022.04.20

Abstract

In this study, a pull-out test considering the adhesive type, embedded length, and direction of re-bar was conducted to evaluate the pull-out performance of glued-in rod joints using timber and adhesive produced in Korea. In the test, the specimens using liquid adhesive showed better pull-out performance, and the longer the embedded length of the re-bar, the higher the maximum tensile load by inducing the yield of the re-bar first. Through the test results, a glued-in rod joints design, which is advantageous to design the adhesive strength stronger than the yield strength of re-bar, was proposed, and a correction factor of 0.75 for the adhesive strength considering construction error was also suggested.

본 연구에서는 국내에서 생산되는 목재와 접착제를 활용한 Glued-in rod 접합부의 인발성능을 평가하고자 접착제의 종류, 철근의 매입깊이 및 매입방향을 고려한 인발성능 실험연구를 수행하였다. 실험결과, 액상형 접착제 사용 실험체가 더 우수한 인발성능을 보여주었으며, 철근의 매입깊이가 길어질수록 철근의 항복을 먼저 유도하여 높은 최대 인발하중을 보여주었다. 인발성능 실험결과를 통하여 철근의 항복강도보다 접착제의 부착강도를 더 강하게 설계하는 것이 유리한 Glued-in rod 접합부 설계식을 제안하였으며, 접착제의 부착강도의 시공오차를 고려한 보정계수 0.75 또한 제안하였다.

Keywords

Acknowledgement

This research was supported by a grant(No. 22AUDP-B146511-05) from the Urban Architecture Research Project funded by the Korea Agency for Infrastructure Technology Advancement(KAIA).

References

  1. Park KS. Shear performance evaluation at the interface between CLT and concrete. Journal of Korean Association for Spatial Structures. 2021 Mar;21(3):35-42. http://dx.doi.org/10.9712/KASS.2021.21.3.35
  2. Nils R, Stefan B, Morten V, Marvin K, Till V. Influence of imperfections on the load capacity and stiffness of glued-in rod connections. Construction and Building Materials. 2019 Nov;226(30):200-11. https://doi.org/10.1016/j.conbuildmat.2019.07.278
  3. Broughton JG, Hutchinson AR. Pull-out behaviour of steel rods bonded into timber. Materials and Structures. 2001 Mar;34(2):100-9. https://doi.org/10.1007/BF02481558
  4. Ling Z, Xiang Z, Liu W, Yang H, Tang J. Load-slip behaviour of glue laminated timber connections with glued-in steel rod parallel to grain. Construction and Building Materials. 2019 Dec;227:1-13. https://doi.org/10.1016/j.conbuildmat.2019.117028
  5. Hasamitsu K, Shota H. Proposal of calculation formula for pull-out strength of glued-in rod joint. Journal of Structural and Construction Engineering. 2021 Mar;86(781):469-79. http://doi.org/10.3130/AIJS.86.469
  6. Sofi M, Lumantarna E, Hoult R, Mooney M, Mason N, Lu J. Bond strength of GiR in cross-laminated timber: A preliminary study. Construction and Building Materials. 2021 Sep;301:1-13. https://doi.org/10.1016/j.conbuildmat.2021.123864
  7. Yang IS, Park GH, Kim SC. Elasto-plastic performance of wood beam to column joints with metal connector and adhesive in wooden structures. Journal of the Architectural Institute of Korea Structure & Construction. 2012 Dec;28(12):21-8. https://doi.org/10.5659/JAIK_SC.2012.28.12.21
  8. Pang SJ, Ahn KS, Kim JY, Lee HS, Oh JK. Tensile performance of glued-in rod connections for larch glulam. Proceeding of the Korean Society of Wood Science & Technology; 2021 Apr 22-3; Daegu, Korea. Seoul (Korea): the Korean Society of Wood Science & Technology; 2021. p. 62.
  9. Lim NG, Her JW, Park CW. An experimental study on flame resistant performance by flame resistant method and agents. Journal of the Korea Institute of Building Construction. 2008 Dec;8(6):117-22. https://doi.org/10.5345/JKIC.2008.8.6.117
  10. Park CW, Hong SW, Lee JK, Lim NG. Flame retardant and weather proof characteristic of dan-chung treated wooden by flame retardant performance. Journal of the Korean Institute of Building Construction. 2013 Feb;13(2):122-30. https://doi.org/10.5345/JKIBC.2013.13.2.122
  11. KS F 3021. Structural glued laminated timber. Korean Industrial Standards; 2018.
  12. KS D 3504. Steel bars for concrete reinforcement. Korean Industrial Standards; 2021.