한국섬유공학회지 (Textile Science and Engineering)

  • 제58권3호
  • /
  • Pages.154-160
  • /
  • 2021
  • /
  • 1225-1089(pISSN)
  • /
  • 2288-6419(eISSN)
한국섬유공학회 (The Korean Fiber Society)
권호 표지
DOI QR코드

DOI QR Code

폴리에스터 지오텍스타일의 화학저항성 시험 및 가속수명 해석에 의한 장기성능 평가

Long-term Performance Evaluation Through Chemical Resistance Tests and Accelerated Life Analysis of Polyester Geotextiles

  • 한상민 (상지대학교 대학원 토목공학과) ;
  • 최부열 (상지대학교 대학원 토목공학과) ;
  • 이승호 (상지대학교 스마트건설공학과) ;
  • 전한용 (인하대학교 화학공학과)
  • Han, Sang Min (Department of Civil Engineering, Sangji University Graduate School) ;
  • Choi, Bu Yeol (Department of Civil Engineering, Sangji University Graduate School) ;
  • Lee, Seung Ho (Department of Civil Engineering, Sangji University) ;
  • Jeon, Han-Yong (Department of Chemical Engineering, Inha University)
  • 투고 : 2021.06.02
  • 심사 : 2021.06.24
  • 발행 : 2021.06.30
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, the long-term performance of polyester woven and nonwoven geotextiles was evaluated through chemical resistance tests and accelerated life analysis. In both polyester woven and nonwoven geotextiles, there was almost no change in the fiber surface before and after immersion in the buffer solution, and the higher the temperature, the greater the strength decrease. Using the constitutive equation of the Arrhenius acceleration model, the strength retention rate by chemical resistance in the pH buffer solution was analyzed, and the long-term performance was evaluated from the change in the strength retention ratio. In the case of the polyester woven geotextile, it could be predicted that the time required for strength retention at 30 ℃ and pH 3 was 62.75471 days. In the case of the polyester nonwoven geotextile, the higher the temperature and pH value, the more difficult it was to measure the tensile strength because of the decomposition of the nonwoven geotextile.

키워드

참고문헌

  1. R. M. Koerner, "Designing with Geosynthetics", Xlibris Corporation, Indiana, USA, 2012, 6th Ed., Chapter 2.
  2. H.-Y. Jeon, Y. C. Chang, J. W. Jang, Y. I. Chung, Y. M. Park, K. Y. Lee, J. G. Jung, and Y. T. Kim, "Design & Installation of Geosynthetics for Field Engineers", SIIR Press Co. Ltd., 2014, Chap. 1-5.
  3. IFAI, "Geotechnical Fabrics Report - Specifier's Guide 2019", Roseville, MN, USA, 2019.
  4. S. J. Ahn, J. I. Kim, J. S. Bok, H. S. Lee, and H. Y. Jeon, "Performance Evaluation of Isotropic Spunbonded Geotextiles for Vacuum Consolidation", Text. Sci. Eng., 2014, 51, 200-206. https://doi.org/10.12772/TSE.2014.51.200
  5. Y. S. Jang, "Soil Mechanics", SIIR Press Co. Ltd., 2010, Chap. 2-4.
  6. C. W. Hsieh, Y.-F. Chiu, and J.-B. Wang, "Wheathering Properties of Geotextiles in Ocean Environments", Geosynth. Int., 2006, 13, 210-217. https://doi.org/10.1680/gein.2006.13.5.210
  7. B. Y. Choi, Y. Yan, S. G. Kim, S. H. Lee, and H.-Y. Jeon, "Prediction of Long-term Behavior and Performance Evaluation of Prefabricated Vertical Drains under Seawater Conditions", Text. Sci. Eng., 2020, 57, 218-224. https://doi.org/10.12772/TSE.2020.57.218
  8. R. M. Koerner, G. R. Koerner, and Y. G. Hsuan, "Lifetime Prediction of Exposed Geomembranes", Proc. GRI-18 Conference at GeoFrontiers, Paper No. 2.18, Austin, Texas, USA, 2005.
  9. R. M. Koerner, A. E. Lord Jr., and Y. G. Hsuan, "Arrhenius Modeling to Predict Geosynthetic Degradation," J. Geotext. Geomembr., 1992, 11, 151-183. https://doi.org/10.1016/0266-1144(92)90042-9