한국정보통신학회논문지 (Journal of the Korea Institute of Information and Communication Engineering)

  • 제24권9호
  • /
  • Pages.1158-1164
  • /
  • 2020
  • /
  • 2234-4772(pISSN)
  • /
  • 2288-4165(eISSN)
한국정보통신학회 (The Korea Institute of Information and Commucation Engineering)
권호 표지
DOI QR코드

DOI QR Code

스마트빌딩 환경에서 Zigbee-MQTT를 이용한 사용자 패턴 기반 대기전력 저감 시스템 설계 및 구현

Design and Implementation of User Pattern based Standby Power Reduction System Applying Zigbee-MQTT in a Smart Building Environment

  • 투고 : 2020.05.21
  • 심사 : 2020.07.21
  • 발행 : 2020.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

국내의 경우 수입 에너지에 대한 의존도가 매우 높아 낭비되는 전력을 저하시키고 전력 효율성을 향상시키기 위해 저전력 기술인 Zigbee를 기반으로 대기전력 저감 연구가 이루어지고 있다. 그러나 Zigbee는 IoT 표준 프로토콜이 아니고, 네트워크 기반이 아니기 때문에 별도의 게이트웨이를 두어 네트워크를 구축해야 하며, 국제적으로 제시하고 있는 기기 전력 소비량에 대한 기준도 모호하기 때문에 대기전력에 대한 연구는 미흡한 상태이다. 따라서 본 논문에서는 기존 Zigbee 기술에 IoT 표준 프로토콜인 MQTT를 적용하여 별도의 게이트웨이 없이 네트워크망을 구축하고, 대기전력 저하 및 사용자의 패턴을 수집하는 대기전력 저감 시스템을 설계 및 구현하였다. 기존 시스템과 평가한 결과 기존 시스템 대비 약 7.11%의 대기전력이 소모된 것을 확인하였다.

In Korea, the dependence on imported energy is very high, and research to reduce standby power is being conducted based on Zigbee, a low-power technology, to reduce wasted power and improve power efficiency. However, because Zigbee is not an IoT standard protocol and is not network-based, it is necessary to build a network with a separate gateway, and research on standby power is insufficient because the standards for international power consumption of devices are ambiguous. Therefore, in this paper, we applied the IoT standard protocol MQTT to the existing Zigbee technology to build a network network without a separate gateway, and designed and implemented a standby power reduction system that collects standby power degradation and user patterns. As a result of evaluating with the existing system, it was confirmed that about 7.11% of standby power was consumed compared to the existing system.

키워드

참고문헌

  1. Korea Energy Agency, "Knowledge Energy," Korea Energy Agency, Apr. 2019.
  2. Y. H. Jang, S. C. Park, and S. H. Yoon, "Design and Implementation of MQTT-based Standby Power Reduction System in Z-Wave Network Environment," Journal of Korea Multimedia Society, vol. 23, no. 3, pp. 421-429, Mar. 2020.
  3. J. W. Jeon, and M. R. Yi, "Smart Multiple-Tap System based on WiFi for Reduction of Standby-Power," Journal of the Korea Society of Computer and Information, vol. 22, no. 6, pp. 123-129, Jun. 2017. https://doi.org/10.9708/jksci.2017.22.06.123
  4. K. T. Nam, Y. C. Kim, and E. P. Hong, "Design of Electric Wheelchair System to Minimize Standby Power Consumption," in Proceedings of the Korean Society for Precision Engineering, South Korea, pp. 798-798, May. 2018.
  5. S. K. Eun, and S. G. Choi, "Energy Saving Management based on Sensing Information for Minimization on Power Consumption Amount Considering Satisfaction of user at Indoor Environment," in Proceeding of Symposium of the Korean Institute of Communications and Information Sciences, South Korea, pp. 3-4, 2016.
  6. Y. A. Lee, K. C. Kim, and S. B. Han, "Design of New Smart Switch with Remote Power Control and Standby Power Management Function," Journal of the Korea Institute of Information and Communication Engineering, vol. 14, no. 10, pp. 2343-2350, Oct. 2010. https://doi.org/10.6109/jkiice.2010.14.10.2343
  7. S. C. Lee, S. W. Kang, N. Y. Kim, and P. L. Chung, "Automatically shut off Standby Power using Ultrasonic Sensor," in Proceedings of the Korean Institute of Information Scientists and Engineers, South Korea, pp. 1708-1710, 2019.
  8. S. J. Kim, G. H. Park, S. H. Jo, and S. M. Lee, "Development of a Smart Power Control System based on Beacon Information for Reducing the Energy Consumption of Personal Computers," in Proceeding of Symposium of the Korean Institute of Communications and Information Sciences, South Korea, pp. 627-628, 2017.
  9. S. H. Kim, D. H. Kim, H. S. Oh, H. S. Jeon, and H. J. Park, "The Data Collection Solution based on MQTT for Stable IoT Platforms," Journal of the Korea Institute of Information and Communication Engineering, vol. 20, no. 4, pp. 728-738, Apr. 2016. https://doi.org/10.6109/jkiice.2016.20.4.728
  10. S. W. Kang, "Characterizing Power Consumption of MQTT Protocol Usage on Raspberry Pi," Journal of the Korea Institute of Information and Communication Engineering, vol. 21, no. 12, pp. 2347-2356, Dec. 2017. https://doi.org/10.6109/JKIICE.2017.21.12.2347
  11. G. H. Lee, D. H. Kim, C. H. Jeon, H. S. Jeon, and H. J. Park, "A Study for Improving Efficiency of IoT Environment and Solution based on MQTT Protocol," Journal of Korean Institute of Communications and Information Sciences, vol. 44, no. 7, pp. 1318-1326, Jul. 2019. https://doi.org/10.7840/kics.2019.44.7.1318
  12. D. K. Lee, and D. J. Choi, "Implementation of Zigbee-based Publish/Subscribe System for M2M/IoT Services," Journal of Korea Multimedia Society, vol. 17, no. 12, pp. 1461-1472, Dec. 2014. https://doi.org/10.9717/kmms.2014.17.12.1461
  13. S. J. Lee, and D. H. Kim, "A Study of Standby Power Control based on Zigbee in Smart Home," Journal of Korea Multimedia Society, vol. 17, no. 7, pp. 879-885, Jul. 2014. https://doi.org/10.9717/kmms.2014.17.7.879
  14. E. I. Jo, Y. J. Ko, and Y. H. Ji, "A Methodology Study on Reducing Standby Mode Power Using an Energy Stroage System," in Proceedings of Korean Society for Energy, South Korea, pp. 195-195, 2016.
  15. Y. A. Lee, K. C. Kim, and S. B. Han, "Design of New Smart Switch with Remote Power Control and Standby Power Management Function," Journal of the Korea Institute of Information and Communication Engineering, vol. 14, no. 10, pp. 2343-2350, May. 2010. https://doi.org/10.6109/jkiice.2010.14.10.2343