Journal of the Korea institute for structural maintenance and inspection (한국구조물진단유지관리공학회 논문집)

Korea Institute for Structural Maintenance Inspection (한국구조물진단유지관리공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Coating Thickness of Surface Modified Aggregate by Using the Excess Paste Theory and Rheology Value

잉여 페이스트 이론과 레올로지 정수를 이용한 표면 개질골재의 피막두께 평가에 관한 연구

  • 최희섭 (키타미공업대학 공학부 사회환경인프라 공학코스) ;
  • 최형길 (경북대학교 건축학부)
  • Received : 2018.12.05
  • Accepted : 2019.01.08
  • Published : 2019.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

This study applies to the surface modification technique by coating the surface of aggregates using the modified paste such as cementitious materials in order to develop completely recycling technology of coarse aggregate. In this case, coating thickness of modified aggregate can be considered that the decision is dependent on the viscosity and tenacity of modified paste. In this study identify the flow properties of the fresh modified paste, and examined for the coating thickness of modified aggregate. As a result, it was possible to design a quantitative coating thickness of modified paste assuming that a modified paste to a Bingham Fluid and consider by excess paste theory and rheology constant (yield value). Accordingly, it is considered that the quantitative mix design of concrete using by surface modified aggregates will be possible.

본 연구는 굵은골재의 완전 리사이클 기술개발을 위해서 시멘트계 재료를 이용한 개질 페이스트를 이용하여 원골재의 표면을 코팅하는 표면개질 기술을 적용하고 있다. 이 때에 원골재와 개질 페이스트의 계면은 개질 페이스트의 점착력과 점도에 의존되어 개질골재의 피막두께가 결정된다고 생각할 수 있다. 본 연구에서는 굳지 않은 상태에서의 개질 페이스트의 유동특성을 파악하고 표면 개질골재의 피막 두께에 대해 검토한 결과, 개질 페이스트를 빙엄유체로서 가정하여, 잉여 페이스트 이론과 유동학 정수 (항복치)를 고려하는 것으로 개질 페이스트의 정량적인 피막 두께의 설계가 가능하여, 표면개질 골재를 이용한 콘크리트의 정량적인 배합설계가 가능할 것으로 판단된다.

Keywords

References

  1. Noguchi, T. and Tamura M. (2001), Concrete design toward complete recycling, Structural Concrete, 2(3), 155-167 https://doi.org/10.1680/stco.2001.2.3.155
  2. Noguchi, T. (2008), Resource recycling in concrete (Present and future), Stock Management for Sustainable Urban Regeneration, Springer
  3. Ei-ichi, T., Tetsurou, K. (1990), Mechanism and Effects of Double Mixing on Properties of Cement Paste, The journal of Materials of JAPAN, 39(442), 175-181.
  4. Choi, H.S., Kitagaki, R., Noguchi, T. (2012), A Study on the Completely Recovery of Surface Modification Aggregate using Microwave, Proceedings of the japan concrete institute, 34(1), 1582-1587.
  5. Choi, H.S., Kitagaki, R., Noguchi, T. (2014), Effective Recycling of Surface Modification Aggregate using Microwave Heating, Journal of Advanced Concrete Technology, 12(1), 34-45. https://doi.org/10.3151/jact.12.34
  6. Tsujino, M., Noguchi, T., Tamura, M., Kanematsu, M., Maruyama, I. (2007), Application of Conventionally Recycled Coarse Aggregate to Concrete Structure by Surface Modification Treatment, Journal of Advanced Concrete Technology, 5(1), 13-25. https://doi.org/10.3151/jact.5.13
  7. Oh, S.G. (1999), Rheology evaluation and flow design of high flowing concrete, Ph.D Dissertation, The University of Tokyo, Tokyo, Japan.
  8. Kennedy, C.T. (1940), The design of concrete mixes, Proceedings of the American Concrete Institute, 36(2), 373-400.
  9. Miyake, J., Matsushita, H. (2008), Estimation of the sand percentage for the largest deformability of fresh concrete at any water cement ratio, Journal of Japan Society of Civil Engineers, 64(2), 361-370.
  10. TEMPLE C.PATTON. (1971), Paint Flow and Pigment Dispersion (Japanese), 84-119.
  11. Beddow, J.K. (1980), Particulate Science and Technology, Chemical Publishing Company, New York.
  12. Katoh, J.K. (1965), The relationship and related problems in the concrete mix design and workability, The annual report of Cement and Concrete Engineering, 333-337.