참고문헌
- Abdallah, S., Fan, M. and Rees, D. W. A. (2018). "bonding mechanisms and strength of steel fiber-reinforced cementitious composites: Overview." Journal of Materials in Civil Engineering, Vol. 30, No. 3, p. 04018001. doi: 10.1061/(ASCE)MT.1943-5533.0002154.
- Al Khalaf, M. N. and Page, C. L. (1979). "Steel/mortar interfaces: Microstructural features and mode of failure." Cement and Concrete Research, Vol. 9, No. 2, pp. 197-207. doi: 10.1016/0008-8846(79)90026-7.
- Al Khalaf, M. N., Page, C. L. and Ritchie, A. G. B. (1980). "Effects of fibre surface composition on mechanical properties of steel fibre reinforced mortars." Cement and Concrete Research, Vol. 10, No. 1, pp. 71-77. https://doi.org/10.1016/0008-8846(80)90053-8
- Alwan, J. M., Naaman, A. and Hansen, W. (1991). "Pull-out work of steel fibers from cementitious composites?: Analytical investigation." Cement & Concrete Composites, Vol. 13, No. 4, pp. 247-255. doi: 10.1016/0958-9465(91)90030-L.
- Azhari, F. and Banthia, N. (2012). "Cement-based sensors with carbon fibers and carbon nanotubes for piezoresistive sensing." Cement and Concrete Composites, Vol. 34, No. 7, pp. 866-873. doi: 10.1016/j.cemconcomp.2012.04.007.
- Bartos, P. (1981). "Review paper: Bond in fibre reinforced cements and concretes." The International Journal of Cement Composites, Vol. 3, No. 3, pp. 159-177.
- Bentur, A. and Alexander, M. G. (2000). "A review of the work of the RILEM TC 159-ETC: Engineering of the interfacial transition zone in cementitious composites." Materials and Structures, Vol. 33, No. 2, pp. 82-87. doi: 10.1007/BF02484160.
- Bentur, A., Diamond, S. and Mindess, S. (1985). "The microstructure of the steel fibre-cement interface." Journal of Materials Science, Vol. 20, No. 10, pp. 3610-3620. doi: 10.1007/BF01113768.
- Bontea, D. M., Chung, D. D. L. and Lee, G. C. (2000). "Damage in carbon fiber-reinforced concrete, monitored by electrical resistance measurement." Cement and Concrete Research, Vol. 30, No. 4, pp. 651-659. doi: 10.1016/S0008-8846(00)00204-0.
- Chan, Y. W. and Chu, S. H. (2004). "Effect of silica fume on steel fiber bond characteristics in reactive powder concrete." Cement and Concrete Research, Vol. 34, No. 7, pp. 1167-1172. doi: 10.1016/j.cemconres.2003.12.023.
- Chung, D. D. L. (2002). "Piezoresistive cement-based materials for strain sensing." Journal of Intelligent Material Systems and Structures, Vol. 13, No. 9, pp. 599-609. doi: 10.1106/104538902031861.
- Ford, S. J., Shane, J. D. and Mason, T. O. (1998). "Assigment of features in impedance spectra of the cement paste/steel system." Cement and Concrete Research, Vol. 28, No. 12, pp. 1737-1751. https://doi.org/10.1016/S0008-8846(98)00156-2
- Fu, X and Chung, D. D. L. (1997). "Bond strength and contact electrical resistivity between cement and stainless steel fiber: their correlation and dependence on fiber surface treatment and curing age." ACI Materials Journal, Vol. 94, No. 3, pp. 203-208.
- Fu, X., Lu, W. and Chung, D. D. L. (1998). "Improving the Strain-sensing ability of carbon fiber-reinforced cement by ozone treatment of the fibers." Cement and Concrete Research, Vol. 28, No. 2, pp. 183-187. doi: 10.1016/S0008-8846(97)00265-2.
- Han, B. and Ou, J. (2007). "Embedded piezoresistive cement-based stress/strain sensor." Sensors and Actuators, A: Physical, Vol. 138, No. 2, pp. 294-298. doi: 10.1016/j.sna.2007.05.011.
- Han, B., Yu, X. and Kwon, E. (2009). "A self-sensing carbon nanotube/cement composite for traffic monitoring." Nanotechnology, Vol. 20, No. 44, pp. 1-5. doi: 10.1088/0957-4484/20/44/445501.
- Han, B., Yu, X. and Ou, J. (2014). Self-sensing concrete in smart structures, Butterworth Heinemann, Kindlington.
- Han, B., Zhang K., Yu, X., Kwon, E. and Ou, J. (2011). "Nickel particle-based self-sensing pavement for vehicle detection." Measurement: Journal of the International Measurement Confederation, Vol. 44, No. 9, pp. 1645-1650. doi: 10.1016/j.measurement.2011.06.014.
- Han, B., Zhang, K., Yu, X., Kwon, E. and Ou, J. (2012). "Electrical characteristics and pressure-sensitive response measurements of carboxyl MWNT/cement composites." Cement and Concrete Composites, Vol. 34, No. 6, pp. 794-800. doi: 10.1016/j.cemconcomp.2012.02.012.
- Hou, T. C. and Lynch, J. P. (2005). "Conductivity-based strain monitoring and damage characterization of fiber reinforced cementitious structural components." Smart Structures and Materials, pp. 419-429.
- Kim, D. J., El-Tawil, S. and Naaman, A. (2010). "Effect of matrix strength on pullout behavior of high-strength deformed steel fibers." Vol. 272, ACI special publication, pp. 135-150.
- Kim, M. K. and Kim, D. J. (2018). "Electro-mechanical self-sensing response of ultra-high-performance fiber-reinforced concrete in tension Electromechanical response of high performance fiber reinforced cementitinous composites containing milled glass fibers under tension." Materials, Vol. 11, No. 7, pp. 1-18.
- Kim, M. K., Kim, D. J. and An, Y. K. (2018). "Electro-mechanical self-sensing response of ultra-high-performance fiber-reinforced concrete in tension." Composites Part B: Engineering, Vol. 134, pp. 254-264. doi: 10.1016/j.compositesb.2017.09.061.
- Le, H. V. and Kim, D. J. (2017). "Effect of matrix cracking on electrical resistivity of high performance fiber reinforced cementitious composites in tension." Construction and Building Materials, Vol. 156, pp. 750-760. doi: 10.1016/j.conbuildmat.2017.09.046.
- Le, H. V., Moon, D. and Kim, D. J. (2018). "Effects of ageing and storage conditions on the interfacial bond strength of steel fibers in mortars." Construction and Building Materials, Vol. 170, pp. 129-141. https://doi.org/10.1016/j.conbuildmat.2018.03.064
- Lee, Y., Kang, S. T. and Kim, J. K. (2010). "Pullout behavior of inclined steel fiber in an ultra high strength cementitious matrix." Construction and Building Materials, Vol. 24, No. 10, pp. 2030-2041. https://doi.org/10.1016/j.conbuildmat.2010.03.009
- Naaman, A. E. and Najm, H. (1991). "Bond-slip mechanisms of steel fibers in concrete." ACI Materials Journal, Vol. 88, No. 2, pp. 135-145.
- Nguyen, D. L., Song, J., Manathamsombat, C. and Kim, D. J. (2014). "Comparative electromechanical damage-sensing behaviors of six strain-hardening steel fiber-reinforced cementitious composites under direct tension." Composites Part B: Engineering, Vol. 69, pp. 159-168. doi: 10.1016/j.compositesb.2014.09.037.
- Park, S. H., Ryu, G. S., Koh, K. T. and Kim, D. J. (2014). "Effect of shrinkage reducing agent on pullout resistance of high-strength steel fibers embedded in ultra-high-performance concrete." Cement and Concrete Composites, Vol. 49, pp. 59-69. doi: 10.1016/j.cemconcomp.2013.12.012.
- Peled, A., Torrents, J. M., Mason, T. O., Shah, S. P. and Garboczi, E. J. (2001). "Electrical impedance spectra to monitor damage during tensile loading of cement composites." ACI Materials Journal, Vol. 98, No. 4, pp. 313-322. doi: 10.14359/10400.
- Pour-Ghaz, M., Kim, J., Nadukuru, S. S., Connor, S. M., Michalowski, R. L., Bradshaw, A., Green, R. A., Lynch, J. P., Poursaee, A. and Weiss, W. J. (2011). "Using electrical, magnetic and acoustic sensors to detect damage in segmental concrete pipes subjected to permanent ground displacement." Cement & Concrete Composites, Vol. 33, pp. 749-762. https://doi.org/10.1016/j.cemconcomp.2011.04.004
- Ranade, R., Zhang, J., Lynch, J. P. and Li, V. C. (2014). "Influence of micro-cracking on the composite resistivity of Engineered Cementitious Composites." Cement and Concrete Research, Vol. 58, pp. 1-12. doi: 10.1016/j.cemconres.2014.01.002.
- Shannag, M. J., Brincker, R. and Hansen, W. (1997). "Pullout behavior of steel fibers from cement-based composites." Cement and Concrete Research, Vol. 27, No. 6, pp. 925-936. doi: 10.1016/S0008-8846(97)00061-6.
- Shi, Z. Q. and Chung, D. D. L. (1999). "Carbon fiber-reinforced concrete for traffic monitoring and weighing in motion." Cement and Concrete Research, Vol. 29, No. 3, pp. 435-439. doi: 10.1016/S0008-8846(98)00204-X.
- Song, J., Nguyen, D. L., Manathamsombat, C. and Kim, D. J. (2015). "Effect of fiber volume content on electromechanical behavior of strain-hardening steel-fiber-reinforced cementitious composites." Journal of Composite Materials, Vol. 49, No. 29, pp. 3621-3634. doi: 10.1177/0021998314568169.
- Suryanto, B., McCarter, W. J., Starrs, G. and Ludford-jones, G. V. (2016). "Electrochemical immittance spectroscopy applied to a hybrid PVA/steel fiber engineered cementitious composite." Materials and Design, Vol. 105, No. 5, pp. 179-189. doi: 10.1016/j.matdes.2016.05.037.
- Torrents, J. M., Mason, T. O. and Garboczi, E. J. (2000). "Impedance spectra of fiber-reinforced cement-based composites: A modeling approach." Cement and Concrete Research, Vol. 30, No. 4, pp. 585-592. doi: 10.1016/S0008-8846(00)00211-8.
- Wang, D., Shi, C., Wu, Z., Xiao J., Huang, Z. and Fang, Z. (2015). "A review on ultra high performance concrete: Part II. Hydration, microstructure and properties." Construction and Building Materials, Vol. 96, pp. 368-377. doi: 10.1016/j.conbuildmat.2015.08.095.
- Wen, S. and Chung, D. D. L. (2003). "A comparative study of steeland carbon-fiber cement as piezoresistive strain sensors." Advances in Cement Research, Vol. 15, No. 3, pp. 119-128. https://doi.org/10.1680/adcr.2003.15.3.119
- Wu, Z., Khayat, K. H. and Shi, C. (2018). "How do fiber shape and matrix composition affect fiber pullout behavior and flexural properties of UHPC?." Cement and Concrete Composites, Vol. 90, pp. 193-201. doi: 10.1016/j.cemconcomp.2018.03.021.
- Yoo, D. Y., You, I. and Lee, S. J. (2017). "Electrical properties of cement-based composites with carbon nanotubes, graphene, and graphite nanofibers." Sensors, Vol. 17 No. 5, pp. 1-13. doi: 10.3390/s17051064.