Journal of the Korean Solar Energy Society (한국태양에너지학회 논문집)

The Korean Solar Energy Society (한국태양에너지학회)
권호 표지
DOI QR코드

DOI QR Code

Study on Development of Inducing Airflow Duct System for Kitchen Hood Using Ejector Method

이젝터 기술을 활용한 주방후드용 기류유인 덕트 시스템의 개발에 관한 연구

  • Received : 2019.10.03
  • Accepted : 2019.11.19
  • Published : 2019.12.30
Download PDF
⟨ Previous Next ⟩

Abstract

Kitchen hoods are limited in discharging all contaminants produced during cooking. Contaminants that have not been discharged can rise to the upper part of the kitchen and become stacked. To solve this problem, there is a way to increase the air volume of the kitchen hood, but there are limits, so a new system is required. This study proposes the Duct System (IADK : Inducing Airflow Duct system for Kitchen hood )through 3D printers and experiments. To do this, the pressure is measured to verify the three levels of air volume provided by the kitchen hood. To check the degree of loss of flow in the existing kitchen hood system, install flexible ducts alone to measure the pressure. Change the internal diameter and type of connection of the IADK and measure the pressure. The air pressure, static pressure difference, and loss factor are calculated and analyzed using the pressure measured through the experiment.

Keywords

References

  1. Min, B. S. and Lee, S. W., The Study on Performance evaluation of gas-range hood and indoor air pollution by cooking, Architectural Institute of Korea, Vol. 18, No. 11, pp. 279-286, 2002.
  2. Rhee, D. J., Park, J. C., and Rhee, E. K., A Study on the Measurement of the Indoor Air Quality in the Apartment Kitchen, Architectural Institute of Korea, Vol. 22, No.1, pp. 541-544, 2002.
  3. Ji, S. H., Kim, J. M., Kim, K. H., and Rhee, E. K., An Experimental Study on the Exhaust Performance of Commercial Kitchen Hood, Architectural Institute Of Korea, Vol. 22, No.1, pp. 529-532, 2002.
  4. Sohn, D. Y., Lim, J. H., Choi, Y. H., and Park, J. H., A Numerical Study on the Performance Improvement of Kitchen Range Hood by Air Induction and Air Curtain, Vol. 19, No. 4, pp. 321-327, 2007.
  5. Yi, S .H., A Zstudy on the Ventilation System of a kitchen in Airtight Apartment House, The Society of Air-Conditioning And Refrigerating Engineers Of Korea, pp. 1004-1010, 2000.
  6. Lim, K. B., Lee, K. S. and Lee, C. H., A Numerical Study on the Flow Characteristics of Kitchen Hood System, The Society Of Air-Conditioning And Refrigerating Engineers Of Korea, Vol.18, no.4, pp.359-369, 2006.
  7. Kang, Y. D., Lee, J. C., and Kim, B. S., The Performance Improvement in Ventilation of Kitchen of Housing by Using CFD Method, Korea Institute of Ecological Architecture and Environment, Vol. 18, No. 1, pp. 119-124, 2018.
  8. Kim, J. B., Hwang, D. S., Kang, T. G., Kim, K. Y., and Kim, Y. H., A Study on Variation of Indoor Air Quality focusing on Kitchen Ventilation, The Society Of Air-Conditioning And Refrigerating Engineers Of Korea, pp. 119-119, 2004.
  9. Kim, D. U., Lee, S. M., Lee, J. H. and Kim, T. Y., Improvements of Ventilation System in the Kitchen and Development of High-Powered Exhaust System to Prevent Odor Spread in High-rise Residential Buildings, Architectural Institute of Korea, Vol .23, No. 10, pp. 195-202, 2007.
  10. Jeong, S. H., Kwon, H. M., Ahn, S. J., and Yang, J. H., A Study on the Improvement of Ventilation Rate Using Air-flow Inducing Local Exhaust Ventilation System, JAABE ,Vol. 15 No. 1, 2016.
  11. Lu, W. and Chen, H., Design of Cylindrical Mixing Chamber Ejector According to Performance Analyses, Energy, No. 164, pp. 594-601, 2018.
  12. Tashtouch, B. M., Al-Nimr, M. A., and Khasawneh, M. A., A Comprehensive Review of Ejector Design, Performance, and Applications, Applied Energy, No. 240, pp. 138-172, 2019.
  13. Lee, J. J., Jeon, Y. S., Kim, S. J., and Kim, Y. C., Experimental Analysis on the Performance Characteristics of an Ejector According to Inlet Pressure and Nozzle Position, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 27, No. 5, pp. 263-268, 2015. https://doi.org/10.6110/KJACR.2015.27.5.263
  14. Young, D. F., Brief introduction to fluid mechanics, 5th edition, wiley, 2013.
  15. Choi, S. H. and Lee, G. T., An Experimental Study on the Kitchen Ventilation System Effectiveness by Character of Static Pressure Loss of Each System Component in Apartment Building, Architectural Institute Of Korea, Vol. 28, No. 3, pp. 269-276, 2012.
  16. Hongqiang, W. and Liu, B. H., and Yanxia, Numerical Investigation of the Influences of Mixing Chamber Geometries on Steam Ejector Performance, Elesevier, Desalination No. 353, 2014.
  17. KIMO Debimo Blade Manual, http://www.kimocorea.com