한국수소및신에너지학회논문집 (Transactions of the Korean hydrogen and new energy society)

  • 제30권6호
  • /
  • Pages.629-634
  • /
  • 2019
  • /
  • 1738-7264(pISSN)
  • /
  • 2288-7407(eISSN)
한국수소및신에너지학회 (The Korean Hydrogen and New Energy Society)
권호 표지
DOI QR코드

DOI QR Code

S-RIM을 이용한 Glass Fiber Chopped Strand Mat 강화 p-DCPD 복합재료 제작 및 수치해석을 통한 공정 시간 예측

Manufacturing and Numerical Analysis of Glass Fiber Chopped Strand Mat Reinforced p-DCPD Composites Processed by S-RIM

  • 유형민 (재료연구소 복합재료연구본부) ;
  • 엄문광 (재료연구소 복합재료연구본부) ;
  • 최성웅 (경상대학교 기계시스템공학과)
  • YOO, HYEONGMIN (Composites Research Division, Korea Institute of Materials Science (KIMS)) ;
  • UM, MOONKWANG (Composites Research Division, Korea Institute of Materials Science (KIMS)) ;
  • CHOI, SUNGWOONG (Department of Mechanical System Engineering, Gyeongsang National University)
  • 투고 : 2019.10.11
  • 심사 : 2019.12.30
  • 발행 : 2019.12.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Dicyclopentadiene is a low viscosity resin which forms a poly-dicyclopentadiene rapidly through ring opening metathesis polymerization (ROMP). This poly-dicyclopentadiene has outstanding properties of low-temperature, water and impact resistances. Due to these advantages, military and offshore structures try to apply the DCPD composites by using liquid composite molding process. In this study, 14%, 38% volume fraction fiber glass strand mat reinforced p-DCPD composites processed by structural reaction injection molding (S-RIM) which has resin-catalsyt mixing head and glass fiber preform in the mold. Additionally, S-RIM numerical analysis was conducted to predict the process time depending on fiber volume fraction and mold temperature. The process time is shorter when it has the lower fiber volume fraction or the higher mold temperature. At higher mold temperature, it is necessary to set the maximum mold temperature considering the resin curing time.

키워드

참고문헌

  1. H. M. Yoo, D. J. Kwon, J. M. Park, S. H. Yum, and W. I. Lee, "Mechanical properties of norbornene-based silane treated glass fiber reinforced polydicyclopentadiene composites manufactured by the S-RIM process", e-Polymers, Vol. 17, No. 2, 2017, pp. 159-166, doi: https://doi.org/10.1515/epoly-2016-0257.
  2. M. R. Kessler, and S. R. White, "Cure kinetics of the ringopening metathesis polymerization of dicyclopentadiene", Journal of Polymer Science Part A: Polymer Chemistry, Vol. 40, No. 14, 2002, pp. 2373-2383, doi: https://doi.org/10.1002/pola.10317.
  3. H. Li, Z.Wang, and B. "He, Ring-opening metathesis polymerization of dicyclopentadiene by tungsten catalysts supported on polystyrene", Journal of Molecular Catalysis A: Chemical, Vol. 147, No. 1-2, 1999, pp. 83-88, doi: https://doi.org/10.1016/S1381-1169(99)00131-4.
  4. W. Jeong, and M. R. Kessler. "Toughness enhancement in ROMP functionalized carbon nanotube/polydicyclopentadiene composites", Chemistry of Materials, Vol. 20, No. 22, 2003, pp. 7060-7068, doi: https://doi.org/10.1021/cm8020947.
  5. C. W. Macosko. "RIM, fundamentals of reaction injection molding", Oxford University Press, USA, 1989.
  6. L. J. Lee, J. M. Ottino, W. E. Ranz, and C. W. Macosko, "Impingement mixing in reaction injection molding", Polymer Engineering & Science, Vol. 20, No. 13, 1930, pp. 868-874, doi: https://doi.org/10.1002/pen.760201306.
  7. H. M. Yoo, J. H. Jeon, M. X. Li, W. I. Lee, and S. W. Choi, "Analysis of curing behavior of endo-dicyclopentadiene using different amounts of decelerator solution", Composites Part B: Engineering, Vol. 161, 2019, pp. 439-454, doi: https://doi.org/10.1016/j.compositesb.2018.12.068.
  8. X. Liu, X. Sheng, J. K. Lee, M. R. Kessler, and J. S. Kim, "Rheokinetic evaluation of self-healing agents polymerized by Grubbs catalyst embedded in various thermosetting systems", Composites Science and Technology, Vol. 69, No. 13, 2009, pp. 2102-2107, doi: https://doi.org/10.1016/j.compscitech.2008.08.024.
  9. R.S Spencer and R.E Dillon. "The viscous flow of molten polystyrene", Journal of colloid science, Vol. 3, No. 2, 1948, pp. 163-180, doi: https://doi.org/10.1016/0095-8522(48)90066-X.
  10. D. Nichetti, and I. Manas-Zloczower, "Viscosity model for polydisperse polymer melts", Journal of rheology, Vol. 42, No. 4, 1998, pp. 951-969, doi: https://doi.org/10.1122/1.550908.
  11. E. Rodriguez, F. Giacomelli, and A. Vazquez, "Permeability-Porosity Relationship in RTM for Different Fiberglass and Natural Reinforcements", Journal of Composite Materials, Vol. 38. No. 3, 2004, pp. 259-268, doi: https://doi.org/10.1177/0021998304039269.